Skip navigation

Machines

BAYKAL APH-S 2606x90, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APH-S 2606x90

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good condition (!!) Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe front laser protection device - 2x front, sliding support arms (“sliding” system) - side protective grilles - freely movable foot control - Operation manual **Special accessories included: - UKB tool adapter (13x pieces) - UKB tool clamping plates (13x pieces) - split ROLLERI upper tool 85° - split ROLLERI 4V reversible die 85° * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308286

Lagernummer:
1008-9308286
pressure:
90,0 t
chamfer lenght:
2600 mm
distance between columns:
2050 mm
column arm:
310 mm
TRUMPF TRUMABEND V 130 X, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND V 130 X

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - CNC WILA electro-motor table crowning - TRUMPF electro-hydraulic upper tool clamping - TRUMPF electro-hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front support arms - incl. "Sliding System" - Rear safety device (sliding door) - Safety device on the side (pivoting door) - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308380 * Machinevideo : https://www.youtube.com/watch?v=bgqj2HCDid4

Lagernummer:
1008-9308380
pressure:
130 t
chamfer lenght:
3060 mm
distance between columns:
2690 mm
column arm:
410 mm
HACO PPM 36.200, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPM 36.200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * Torsion shaft for parallelism - electric back stop (X axis) * with handwheel for fine adjustment * on ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361

Lagernummer:
1008-9308361
pressure:
200 t
chamfer lenght:
3600 mm
distance between columns:
3150 mm
stroke of upper beam:
200 mm
EHT EHPS 15-3550+H500, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

EHPS 15-3550+H500

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual

Lagernummer:
1008-9308302
pressure:
150 t
chamfer lenght:
4050 mm
distance between columns:
3050 mm
column arm:
350 mm
KNUTH / DURMA HAP 35200, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

KNUTH / DURMA

HAP 35200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display * digital position display for backgauge (X axis) * digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes * Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/foot control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308265

Lagernummer:
1008-9308265
pressure:
200 t
chamfer lenght:
3550 mm
distance between columns:
3050 mm
column arm:
200 mm
AMADA HFE 50-20, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

AMADA

HFE 50-20

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383 * Machinevideo : https://www.youtube.com/watch?v=lzJmJ7FbpO4

Lagernummer:
1008-9308383
pressure:
50.0 t
chamfer lenght:
2090 mm
distance between columns:
1665 mm
column arm:
400 mm
AMADA HFE 100.3, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

AMADA

HFE 100.3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) ** with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left * Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) * Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) * Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373

Lagernummer:
1008-9308373
pressure:
100 t
chamfer lenght:
3140 mm
distance between columns:
2700 mm
column arm:
420 mm
EHT EHPS 20-30, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

EHPS 20-30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Ausstattung: - elektro-hydraulische CNC Abkantpresse * letzte Pressenprüfung - durchgeführt 2022 - CYBELEC CNC Steuerung - Modell DNC 60 PS (Umbau 2012) - schwenkbare Bedienung, Anbauseite vorne rechts - elektrischer Hinteranschlag, mit Kugelumlaufspindeln (X Achse) - elektrisch-pneumatische Höhenverstellung vom Hinteranschlag (R Achse) - manuelle Matrizenverschiebung, inkl. Matrizenschuh - elektro-hydraulische Oberwerkzeugklemmung - elektro-pneumatische Unterwerkzeugklemmung - EHT - geteilte Oberwerkzeuge - EHT - geteilte Unterwerkzeuge - 1x freibewegliche 2Hand-Fußbedienung - manuelle Zentralschmierung - Schutzgitter seitlich + hinten - Bedienungsanleitung Steuerung + Schaltpläne Maschine * Maschinenlink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308365

Lagernummer:
1008-9308365
pressure:
200 t
chamfer lenght:
3050 mm
distance between columns:
2550 mm
throat:
300 mm
DARLEY EHP 110-31/25, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DARLEY

EHP 110-31/25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** well maintained / good condition (!!) Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control - model DA 58 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC axis adjustment Y1 - Y2 - X axis - CNC electro-motorized back gauge * incl. 2x manually adjustable stop fingers (R+Z axis) - manual table cambering, adjustment via hand crank * including analogue value display - 1x split pointed upper tool (manufacturer UKB) - 1x universal rotating Multi-V die block * incl. 2x chain for hanging in the upper beam - 2x front - adjustable support arms - 1x freely movable 2 hand/foot control - Operating instructions: machine + control (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308384

Lagernummer:
1008-9308384
pressure:
110 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
250 mm
FASTI 904-80-25, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

FASTI

904-80-25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine from a vocational training center (Chamber of Crafts) ** good / well-maintained condition ** with only approx. 1.300 operating hours (!!) Furnishing: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC axis control: Y1 - Y2 - X axis + motorized crowning - electro-motorized & controlled backgauge * with 2x manually movable stop fingers (R+Z axis) - manual upper tool & lower tool clamping - split upper and lower tools - 2x stable, front support arms - movable including mm scale - split upper tool - 1x freely movable 2-hand operation - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - original operating instructions for the control * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308382

Lagernummer:
1008-9308382
pressure:
80.0 t
chamfer lenght:
2550 mm
distance between columns:
2060 mm
ajustment speed:
90.0 mm/sec
BAYKAL APH 3708 x 180, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APH 3708 x 180

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop (!!) Furnishing: - conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) * with 2x manually adjustable stop fingers * Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V universal matrix block - 2x front / sliding support arms - freely movable 2-hand foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308364 * Machine video : https://www.youtube.com/watch?v=9oX5Pqdc18s

Lagernummer:
1008-9308364
pressure:
180 t
chamfer lenght:
3700 mm
distance between columns:
3250 mm
throat:
270 mm
HACO PPM 30.150, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPM 30.150

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple NC controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 * Positioning of the back gauge (X) * Positioning of the depth adjustment (Y1+Y2) * Possibility of programming various programs * Storage capacity max. 200 programs - max. 400 sets * Swivel control panel, front left - electro-motorized, stepless depth adjustment (Y1+Y2 axis) - electro-motorized back gauge (X axis) * 2x manually adjustable stop fingers - manual table crowning, including analogue value display - 1x split upper tool set - "HACO" holder - 1x rotating MULTI V die block (lower tool) - side protection device (pivoting doors) - 1x freely movable foot control - 2x front, stable material support arms - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308386

Lagernummer:
1008-9308386
pressure:
150 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
stroke of upper beam:
120 mm
BOSCHERT PB 2575, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BOSCHERT

PB 2575

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit * digital position indicator * Entry of target/actual values possible - Electro-motor backgauge - X axis * Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lateral protective device (door) - 1x dual free-moving footswitch - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308327

Lagernummer:
1008-9308327
pressure:
75,0 t
chamfer lenght:
2620 mm
distance between columns:
2055 mm
column arm:
400 mm
HACO PPB 30.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPB 30.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * including analogue depth display - manual backgauge, with analogue position display * adjustable from the front * on ball screws * 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308351

Lagernummer:
1008-9308351
pressure:
135 t
chamfer lenght:
3050 mm
distance between columns:
2550 mm
stroke of upper beam:
130 mm
TRUMPF TrumaBend V50, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TrumaBend V50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine with full equipment (all axes controlled)! Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - Rear safety device (sliding door) - Safety device on the side (pivoting door) - Operation manual * Special accessories included: - TRUMPF tool cabinet including various TRUMPF bending tools * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308349 * Machinevideo : https://www.youtube.com/watch?v=segdogmeOFc

Lagernummer:
1008-9308349
pressure:
50,0 t
chamfer lenght:
1275 mm
distance between columns:
1040 mm
column arm:
410 mm
BEYELER PR6 1500 KN x 3100 MM, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BEYELER

PR6 1500 KN x 3100 MM

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP * numerical CNC control unit * 2D graphical programming & product display * Color screen * Tool & program library * clear and logically structured screen pages * Collision display * Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled underbeam cambering (BEYELER system) - manual upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protection device (protective doors) - various folding/bending tools - 1x freely movable 2 hand/foot control - Operating instructions (PDF) + circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368

Lagernummer:
1008-9308368
pressure:
150 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
405 mm
ATLANTIC HPE 36.230, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ATLANTIC

HPE 36.230

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) * Pivoting control panel in front left - CNC electric backgauge (X axis) * with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning * Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control

Lagernummer:
1008-9301533
pressure:
230 t
chamfer lenght:
3600 mm
distance between columns:
3150 mm
column arm:
300 mm
HACO PPES 40.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPES 40.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable * manual windage (Z axis) * manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German * Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.be

Lagernummer:
1008-9301136
pressure:
135 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
stroke:
130 mm
BAYKAL APHS 31.300, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APHS 31.300

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) * 2D graphic touch screen programming mode * 17" high-resolution color TFT * Complete Windows application suite * Delem Modusys compatibility (module scalability and adaptivity) * USB, peripheral port * Pivoting control unit, front left - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1 - 2x CNC electrically movable stop fingers - Electric crowning controlled by CNC - Safety device behind the machine - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - CE mark / declaration of conformity - Control cabinet, on the left side - Operation manual ** Special accessories included : - WILA hydraulic tool clamping above - WILA hydraulic tool clamping below - 1x CNC controlled bending aid (AP1) - "Parking" area for bending assistance * Machinevideo : https://www.youtube.com/watch?v=lT0APHnn9Js

Lagernummer:
1008-9308242
pressure:
300 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
500 mm
TRUMPF TrumaBend V50, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TrumaBend V50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine with only approx. 24.000 operating hours (!!) ** all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front, movable material support arms - 1x rear safety device (pivoting door) - 1x safety device on the side - left (pivoting door) - 1x safety device on the side - right (loose door) - TRUMPF original operating instructions * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308372

Lagernummer:
1008-9308372
pressure:
50.0 t
chamfer lenght:
1275 mm
distance between columns:
1040 mm
column arm:
410 mm
DARLEY EHP 50-20/15, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DARLEY

EHP 50-20/15

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch

Lagernummer:
1008-9308216
pressure:
50,0 t
chamfer lenght:
2050 mm
distance between columns:
1550 mm
dayligth:
320 mm
ATLANTIC HPTE 40.200, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ATLANTIC

HPTE 40.200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible MultiV - universal die block - rear + side protection - 2x front / robust support arms - free-moving 2-hand / double-foot operation - Operation manual

Lagernummer:
1008-9308224
pressure:
200 t
chamfer lenght:
4100 mm
distance between columns:
3150 mm
stroke - stepless adjustable:
200 mm
LVD PPBL 135/40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

LVD

PPBL 135/40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop ** maintained condition (!!) Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Swivel control panel, front right - electro-motorized back gauge (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2 hand/foot control - 2x front support arms - Protective device on the side + behind the machine - Operating instructions + circuit diagram (FR) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370

Lagernummer:
1008-9308370
pressure:
135 t
chamfer lenght:
4050 mm
distance between columns:
3150 mm
throat:
200 mm
GASPARINI PBS CB 165/3000, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

GASPARINI

PBS CB 165/3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine in good / well-maintained condition (!!) Furnishing: - DELEM CNC control - model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPARINI hydraulic lower tool clamping - many insert/bending tools (punches + matrices) - 1x freely movable 2 hand / foot control - 2x front stable support arms - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - original operating instructions + spare parts list (DE) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308355

Lagernummer:
1008-9308355
pressure:
165 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
450 mm
GASPARINI PBS 45/2000 FP, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

GASPARINI

PBS 45/2000 FP

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good / well-maintained condition (!!) Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308356

Lagernummer:
1008-9308356
pressure:
45,0 t
chamfer lenght:
2050 mm
distance between columns:
1600 mm
column arm:
300 mm
ATLANTIC HPT 40.180, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ATLANTIC

HPT 40.180

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - NC controlled hydraulic press brake * with torsion shaft - ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric back gauge * with 2 stop fingers, manually adjustable * on ball screws - manual table crowning, with analogue display - divided deer foot upper tool 85° - divided MultiV - universal matrix block - rear protection - free-moving 2-hand / double-foot operation

Lagernummer:
1008-9308248
pressure:
180 t
chamfer lenght:
4100 mm
distance between columns:
3150 mm
stroke - stepless adjustable:
200 mm
BEYELER RH 100-3100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BEYELER

RH 100-3100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308337

Lagernummer:
1008-9308337
pressure:
100 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
255 mm
ERMAK POWER BEND FALCON 26.100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 26.100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Current new price ~ 60.000 euros ** Special price on request ** from a maintenance workshop - good condition ** with only approx. 1.990 operating hours (!!) -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) * 2D graphical programming * 10.4" TFT color screen with high resolution * Bending sequence calculation * USB interface - Swiveling control panel, mounted on the left - CNC motorized backgauge with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes Y1 - Y2 - X - R - C (crowning) - CNC electric table crowning - divided deer foot upper tool Rolleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Divided universal die block Rolleri M 460 R, including die shoe - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical system - Safety device = light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - Operation manual machine + CNC controler * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308335 * Machinevideo : https://www.youtube.com/watch?v=t9gPmzchB6Y

Lagernummer:
1008-9308335
pressure:
100 t
chamfer lenght:
2600 mm
distance between columns:
2200 mm
column arm:
410 mm
BEYELER RH 60x2050, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BEYELER

RH 60x2050

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine from a workshop for the disabled ** maintained condition (!!) Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * high resolution screen * Clear, concise menus in the operator's language * Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning * very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308363

Lagernummer:
1008-9308363
pressure:
60.0 t
chamfer lenght:
2050 mm
distance between columns:
1550 mm
column arm:
255 mm