Machines

Furnishing: - manual band saw machine, with one. Miter device up to 60 ° - hydraulic, stepless lowering of the saw bow - cuts from 0 ° to 60 ° left - coolant device - hydr. Lowering from the saw frame - autom. Limit shutdown - saw band - workpiece stop - Operating instructions in German

Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

-------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Furnishing : - sanding belt - workpiece stop - Operating instructions in German

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

Furnishing : - sanding belt - workpiece stop - Operating instructions in German

** from a maintenance workshop ** very good condition (!!) Furnishing: - CYBELEC - CNC control Mod.DNC 1200 PS / A * Gest.-axes: Y1 - Y2 - X - R and CNC crowning - Backgauge with 4 stop fingers - Matrix shift - EASYFORM - bending angle laser - front support arms - Back stop with R-axis - Lazer-SAFE protective device in front of the machine - Upper and lower tool - Matrix shift - 2 hand controls / foot switches - Original operating instructions

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

-------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

** from a training workshop (!!) Furnishing: - stepless speed adjustment - pole-changing motor - electromagnetic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Height-adjustable work table, by hand crank - machined base plate - machine swing feet - Coolant device, with separate container

Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm * Item no .: 09. 434, - Euro

Furnishing: - CYBELEC - CNC control Mod.DNC 1200 PS / 8 * swiveling control panel * controlled axes: Y1 + Y2 + X + R + CNC crowning - electrical backgauge with R-axis * with 2x manually adjustable stop fingers - CNC under-table crowning - EHT - "Easy Form" angle measuring system - pneumatic die shifting - pneumatic upper tool clamping - pneumatic lower tool clamping - rear protective grille - 2x adjustable, front support arms - Upper and lower tools - Two-hand operation and foot switch - Operation manual ** Special accessories included: - a lot of insert / press brake tools - EHT tool cabinet for bending tools * Machinevideo : https://www.youtube.com/watch?v=vtjxrKg74LA

Furnishing: - Robust cast iron structure - Saw blade shaft mounted on a spherical cast eccentric - Gear with bronze wheel and ground / hardened - Steel screw (double ball bearing) in a special oil bath - Vice with counter-clamping device for double - workpiece clamping - Vice jaws adjustable around the material - Tighten the saw blade if possible - Electric coolant pump for cooling and - Lubrication of the saw blade Standard equipment: - Adjustable length stop 600 mm (without scale) - tool kit - Detailed operating instructions, maintenance manual, Circuit diagrams and exploded views - Crane eyes for transport * The machine is delivered without a saw blade Special accessories included: - Base cabinet with door (steel frame)

Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - controlled axes: Y1 - Y2 - X axis - FIESSLER AKAS laser protection device in front of the machine - Back stop with 2x stop fingers and recirculating ball spindles - Quick change punch holder SYSTEM A - Upper deer foot tool, ground version - Universal die block 60x60 mm with 4V in the die shoe - SIEMENS electrical system - LEUZE light barrier behind the machine - BOSCH / HOERBIGER hydraulic system - 2x front support arms "sliding system" - Double foot switch - CE mark / declaration of conformity

** New price ~ 22.000 euros Furnishing: - SCHRÖDER positioning control POS 400 * with 9-fold program of bending and upper beam * Piece counter - Sharp rail 30 ° - manual lower beam adjustment - Double foot switch - Operating instructions in German

Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

** New price, including accessories ~ 25.000 euros Furnishing : - semi-automatic vertical cold circular saw - Pneumatic quick release device - Infinitely adjustable saw blade feed - Convenient miter setting with fixed stops - Convenient stroke adjustment of the saw unit via clamping lever - Generously dimensioned gears - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Required instructions ** Special accessories included: - EISELE material feed unit model VE-PV * Feed: 5.0 - 400 mm cut length - EISELE micro spray system - 1x BEHRINGER DIGITAL discharge roller conveyor, with stop 1,000 mm - 2x feed roller conveyors

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Furnishing: - heavy lead / pull spindle conv. Lathe - HEIDENHAIN digital display - Face plate D = 1,000 mm - Multifix steel holder with inserts - automatic feed bed / cross slide - manual feed upper support by handwheel - hardened / ground bed guides - Crank / removable bridge - hydraulic clutch + brake - movable tailstock - increased drive power: 15.0 KW - various other accessories * Machine video: - https://www.youtube.com/watch?v=nH1EsZcWhqw

Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis * Bending segments on request

- Can be used for bending pipes and profile materials - Including standard rollers for round bending of square materials - The top roller is set using an easily visible mm scale - As standard with foot pedal to control the right and left rotation - Can be used both horizontally and vertically - Bending rolls hardened and ground Furnishing: - Machine base - standard rollers (divided) - Lateral straightening rollers - Foot switch with emergency stop - Scale for top roller adjustment - CE mark / declaration of conformity - Operating instructions in German

ERCOLINA Medi Bender "MB 42 EDT-Plus M" Furnishing: - with maximum bending power steel tube 42 x 3.5 mm - New, innovative control with color display and frequency inverter - Frequency converter (1 bending angle, 1 correction angle) - 1x program / 1x bend - Excellent bending quality - with very tight bending radii (from 2 x pipe Ø) and bending angles between 0 ° and 180 ° - Easy handling - High accuracy and reliability - Quick tool change (within a few seconds) - Easy to transport - A huge selection of inexpensive standard tools (metric, gas inch, inch) - Controls, perfectly adapted to the requirements for ease of use - Strictest observance of the regulations / directives of the European Union

Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

++ New price including accessories ~ 45,000 euros Furnishing: - hydraulic pipe bending machine - with a lot of tools + mandrel bars - with 6,000 mm tube length (model A6 / H76-V1S No. 0003023) * including jaw chuck * Digital display for the displacement and rotation of the mandrel - max.bending length: 6,000 mm - max.bending radius: 20 - 200 mm - max.bending angle: 210 ° - Maximum capacity of steel pipes 64 x 3 mm with a radius of 2 x Ø - Maximum capacity gas pipes 2 "Sch.40 - Maximum capacity square profile 60 x 60 x 2 mm - Minimum bending radius 1.5 x Ø - Number of programmable programs 30x pieces with 9x bends each - Programmable C-axis and manual positioning of the Y1 & B axes (feed and rotation) - Variable bending speed - Programming of the bending angle, the springback angle and for the early retrieval of the mandrel - Independent regulation of the mandrel counter-holder and the clamping jaw - Micrometric adjustment of the wrinkle smoother - Additional system to stabilize the hydraulic pressure on the mandrel counterholder - Fast tool change system reduces the number of settings on the machine ** bending segments: - R 55 - 15.0 mm - R 32 - 16.0 mm - R 40 - 18.0 mm - R 40 - 20.0 mm - R 45 - 22.0 mm - R 60 - 28.0 mm - R 84 - 42.4 mm

Furnishing: - hydraulic notching machine - brand new knife set - with adjustable angle, hand wheels for adjustment - digital display - 2x stop rulers - foot switch

Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16

Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Furnishing: - hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity - Required instructions

Furnishing: - electrical backgauge, with analog display - Stop can be folded up - for longer sheet metal strips - welded monoblock steel construction - Special steel knives that can be used on both sides, hardened - Control panel and mechanical stroke counter - manual cutting gap adjustment - 3x support arms - foot switch

Furnishing: - Lower roller adjustment, hydraulic both lower rollers can be adjusted - Machine base - horizontal and vertical work use - Foot switch / control panel - standard rollers (divided) - 2 driven rollers - CE mark / declaration of conformity - Operating instructions in German

Furnishing: - electro / hydraulic band saw - fully automatic - with miter adjustment -60 ° / + 60 ° - stepless adjustment of the saw band speed - hydraulic material tension - stepless clamping force regulation - Material feed by feed slide * up to 1,000 mm with 9x repetitions - KASTO Compact Control control - manual saw band tensioning - coolant device - Microdosing device - replacement saw bands - Operation manual

Furnishing: - gear drill - with autom. Spindle feed - Separate height adjustment of drilling head / work table, via hand crank - machined footplate - adjustable drilling depth stop - automatic tool ejector

Furnishing: - hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - Required instructions Optional extras: - SIDE - Supports / hydraulic lateral. Bending aid ... 4.156, - - CENTER - support / central bending aid ....... 5,265.-

Furnishing: - semi-automatic band saw, with miter adjustment - Miter adjustment via large turntable - stepless lowering of the saw frame - pneumatic vice, with foot switch - Stepless clamping pressure adjustment from the vice - Indicator for saw band tension - machine base - Operating instructions (PDF format)

Furnishing: - Pole changing motor - V-belt drilling machine - manual spindle feed - Height-adjustable support table

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Furnishing: - electro / hydraulic band saw - fully automatic - with miter adjustment -45 ° / + 60 ° * in automatic mode max. 0 ° / + 45 ° - stepless adjustment of the saw band speed - hydraulic material tension - stepless clamping force regulation - Material feed by feed slide - hinged / slidable protective hood - KASTO SpeedControl control - rear material chute - manual saw band tensioning with display - coolant device - Microdosing device - Operation manual

Furnishing: - the drill head is 360 ° around the column swiveling and adjustable in height - gear drill - Thread cutter holder with inserts

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Furnishing: - CYBELEC CNC control model DNC 70 * approx. 300 product sets / 20 tools / 100 machine parameters * multilingual programming possible * Swiveling operation - electr. controlled backgauge, with R axis * X axis = 800 mm * R axis = 225 mm * 6x manually adjustable back stop fingers - WILA CNC electr. Crowning - hydraulic upper tool clamping - 2x robust / front support arms with "sliding system" * height adjustable - 2hand / vehicle operation - machine documentation

Furnishing: - hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - Operating instructions in German - CE mark / declaration of conformity

Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Furnishing: - heavy / robust ring bending machine - 3x motor-driven rollers - hydraulic delivery of the side rollers - hardened tool holder (42CrMo4) - Standard roller set, hardened - Hydraulically adjustable lateral straightening rollers - swiveling control panel - Machine can be used horizontally and vertically

Furnishing: - Universal milling machine for vertical and horizontal milling - Universal milling head, adjustable to different angular positions - Precise surface-machined cross table with T-slots - swiveling control panel - automatic feed X & Y axis, continuously adjustable - manual adjustment of the Z axis, by hand crank - Central lubrication - coolant device ** without vise as shown in the illustration

Furnishing: - Asymmetrical 3-roll bending machine with motor drive - hardened rollers - Motorized rear roller adjustment - Upper roller can be swiveled out - Conical bending device - self-braking main engine - digital display - foot switch

Furnishing: - Aluminum circular saw with manual clamping device - machine base - without saw blade

Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard set of rollers, hardened - Lateral straightening rollers - mobile control panel - 3 driven rollers - digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - Operating instructions in German

Furnishing: - Machine base - horizontal and vertical work use - foot switch - standard rollers (divided) - foot switch - CE mark / declaration of conformity - Operating instructions in German

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Furnishing: - robust mechanical guillotine shears - adjustable manual backgauge - 1x side stop - 2x support arms - rear sheet metal slide - foot switch

Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch

** from a vocational school ** New price approx. 10,000 euros Furnishing: - semi-automatic aluminum circular sawing machine - 1x HM circular saw blade - 2x pneumatic material clamps - Double miter device left + right 45 ° - Head swivel cuts up to 45 ° * Cutting area around 90 ° = 65.0 mm - Rotary table with ball bearings - Machine base with mist spray device - Chip extraction nozzle on the saw blade protective hood - separate suction Semi-automatic cycle: - The saw starts up - material pneum. tighten - Lowering in rapid traverse to the start of the material or cut the same for a series cut - Raise the frame to just above the material - Pneumatic vice to open

Furnishing: - Safe workpiece support - by massive and heavy-duty galvanized steel rollers - Roller support steplessly height adjustable and clampable - Problem-free and efficient material transport for the supply and removal of workpieces techn. Details: - Load capacity, max. 700 kg - Standpipe diameter 74/52 mm

Furnishing: - electrical height adjustment from the boom - hydraulic central clamping - automatic spindle feed - Thread cutting device - Run right / left - T-slot dice table - machined base plate - coolant device

Furnishing: - with plastic container (10 liters) and flexible hose - 230 V connection

scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool

Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Furnishing: - automatic spindle feed - with electromagnetic engagement - Pole changing motor - coolant device - machined base plate

Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg

Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red

Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Furnishing: - Fully automatic / vertically guided metal circular saw - with automatic material feed & quantity specification - 32 cutting programs (number of pieces and length of cut) - stepless saw blade lowering - pneumatic clamping arm / material hold-down device - including minimum quantity spraying device - machine base - 2x saw blades - Operation manual

Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red

The gear column drilling machine GB 50 NC Vario is standard with a infinitely variable speed control, reducing the cutting speed can be optimally adapted to the workpiece. Because of the heavy, massive It is designed primarily for use by professional users or ideally suited in mechanical engineering or workshops. - Equipped with motorized table height adjustment as standard - 6 automatic drilling feeds switchable via electromagnetic clutch - Hand-scraped drilling table made of solid gray cast iron, swiveling from -45° to + 45 ° - Ground base plate with T-slots - for clamping particularly tall workpieces - Guaranteed concentricity = 0.02 mm, measured in the quill - Automatic tool ejector and thread cutting device as standard - Very smooth running thanks to ground gear wheels running in an oil bath - Stable and polished steel column, designed for heavy use - User-friendly operation via membrane keyboard Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - Motorized table lift - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - First filling with Shell Tellus 46 - LED machine operators - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

** LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm² - Pressure reducer with volume and content manometer - gas hose - Basket spool adapter K300 - Mains cable with CEE-16 plug - Manual

** from a maintenance workshop ** good condition (!!) Furnishing: - conventional hydraulic press brake - ELGO P8822 digital display - with electrical backgauge (X axis) - with electrical adjustment of the immersion depth (Y1 + Y2 axis) - 2x manually adjustable stop fingers - Manometer / pressure display * a lot of tools - Movable 2-hand / foot control

characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 8.170 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer * working automatically with pre- and post-filter (mounted)

Furnishing : - combined machine * manual folding machine * manual lever shears with counterweight

Furnishing: - Transportable combination belt grinder - Workpiece support surfaces - Disc grinding station - Surface grinding station - CE declaration

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 8.170 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer * working automatically with pre- and post-filter (mounted)

Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation: 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 8.170 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer * working automatically with pre- and post-filter (mounted)

Furnishing: - Tool cabinet with 5 drawers - Tool drawer fully stocked - drawer extension 88% - Usable dimensions inside: 455 x 600 mm - lockable - mobile

** Exhibition machine / not yet in use ** List price: 3.050 euros 2-stage oil-lubricated high-performance compressor with proven Two-cylinder technology. Very low speed and special quiet, low-vibration mode of operation. As a result, less Wear and tear and longer service life Furnishing: - stationary piston compressor with super sound insulation - Condor quality pressure switch - Operating hours counter - manometer - Motor protection - Compressed air tank, manufactured in accordance with Directive 2009/105 / EC,leaflet AD 2000 - Compressed air tank decoupled from vibrations by means of elastic bearings. - Foundation not necessary, level industrial floor is sufficient. - The compressors correspond to the machine guidelines 2006/42 / EG! - Manual condensate starter valve

** from a maintenance workshop ** very good condition (!!) Furnishing: - electric punch with rotary wedge coupling - Smooth grain search device - punching device - die base - underframe - Connection cable with 16a plug - foot switch

Furnishing : - Pillar slewing crane - manually swiveling - including DEMAG chain hoist PK 1N * Factory No. 5302017 * Year of construction 1979 * Lifting speed 8/4 m / min. * Revolutions 2890 rpm. - chain box

Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - either manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

** LORCH authorized trader - other models on request Description: - A MIG-MAG system that can also use electrodes. Simply remove the burner, Connect the electrode holder to the additional electrode socket and Select electrode welding in the control panel. Furnishing: - Compact device, gas-cooled with synergy operation - stepless welding current setting - Volt & ampere indicator - 7-stage arc dynamic control - Synergy control - Welding program selection in the feed area - full upgradeability

properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Bending power cold warm Flat steel 100 x 7 mm 100 x 15 mm 65 x 12 mm 75 x 20 mm Round steel 22 mm 27 mm Square steel 20 x 20 mm 25 x 25 mm Angle steel 100 x 10 mm 100 x 15 mm scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop

Furnishing: - electric / motorized swivel bending machine - Drive of the upper and bending beam - FASTI PLC control model FM 5 * 5.7 "LCD touch screen display * Numerical input via membrane keyboard * Memory size for 20 programs with 20 steps each - swiveling control panel - manual lower beam adjustment - Double foot switch - Operation manual - 2x front fenders * Replacement bending rails (upper tool)

Furnishing: - hydraulic machine vice

the following variants are possible: - Maximum pressure 7.5 bar - 1.15 m³ / min. - Maximum pressure 10.0 bar - 1.00 m³ / min. - Maximum pressure 13.0 bar - 0.85 m³ / min. Furnishing: - Industrial screw compressor - SOLIDcontrol control ** microprocessor ** Automatic selection of the most favorable operating mode depending on the compressed air requirement ** Automatic optimization of the motor switching cycles ** Pressure recording via pressure transmitter ** Integrated test mode of the outputs ** Connection for higher-level control

Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

** Demonstration machine - as good as new Furnishing: - hydraulic threading machine - Mobile machine frame, with clamping disc - hydraulic manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible - automatic, programmable PLC control system - automatic depth control system, adjustable via the touchscreen - Manual or automatic threading function - 380 V operating voltage - higher speed ranges - Easy to use and ergonomic designs ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16

The BESTVIEW IV automatically darkens in 1 / 30,000 of a second. The BESTVIEW IV is suitable for welding, as well as for grinding. Robust, impact-resistant cover, new improved turn-over headband mechanism, which adjusts the center of gravity of the wearer. High-performance solar cells make battery changes unnecessary 2x 3V lithium batteries (6 years service life)

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Furnishing: - motorized high-performance guillotine shears (crank guillotine shears) - manual backgauge - travel range approx. 600 mm * adjustable with handwheel, including scale - high rigidity due to all-steel construction - Inclined link guide from the cutter bar - Cutting gap adjustment on both sides at the front - continuous hold-down device - rear guard - foot switch - Operation manual * Special accessories included: - 1x set of replacement shear blades

characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever

The BOSCH GGS 8 CE Professional is ideal for Suitable for sanding surfaces. techn. Dater BOSCH GGS 8 CE Professional is ideal for Suitable for sanding surfaces. techn. Data : - Idle speed: 2,500 - 8,000 rpm - Tool holder: collet up to 8 mm - Nominal input power: 750 W - Output power: 420 W - Spindle neck Ø: 43 mm - max.collet Ø: 8 mm - max.grinding wheel Ø: 50 mm - max.polishing tool Ø: 80 mm - Vibration (OF grinding up to Ø25 / Ø50): 2.5 / 2.5 m / s² - Sound pressure level: 82 dB (A) - Weight net / gross: 1.7 / 2.7 kg: - Idle speed: 2,500 - 8,000 rpm - Tool holder: collet up to 8 mm - Nominal input power: 750 W - Output power: 420 W - Spindle neck Ø: 43 mm - max.collet Ø: 8 mm - max.grinding wheel Ø: 50 mm - max.polishing tool Ø: 80 mm - Vibration (OF grinding up to Ø25 / Ø50): 2.5 / 2.5 m / s² - Sound pressure level: 82 dB (A) - Weight net / gross: 1.7 / 2.7 kg

** New price ~ 10.000 euros Furnishing : - manual folding machine for professional use - 2x replacement bending rails above - 1x replacement bending rail below - Clamping via lateral hand levers - stepless clamping range of the upper beam - Fixed stop for setting the bending angle

Furnishing: - Bending angle preselection via electr. Potentiometer - Insert / bending tools - manual backgauge, adjustable up to 750 mm - Double foot switch

The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control

Furnishing: - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge

Furnishing: - heavy / robust manual swivel bending machine - with counterweight - manual angle fixed stop - Hand wheel for manual adjustment of the upper beam - Insert / bending tool

techn. Data : - Sheet width 2,050 mm - Sheet thickness 2.0 mm steel - Sheet thickness 2.5 mm ALU - Sheet metal thickness 1.2 mm stainless steel - Lower beam adjustment 20 mm Furnishing : - manual folding machine - Upper tool 30 ° - R = 1.5 mm / bending rails Special accessories included: - manually adjustable back gauge 10 - 750 mm - with material support table - pneumatic bending aid

-------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device (monoblock)

Furnishing: - mobile edge milling machine for processing of Weld bevels on sheet metal with straight edges - max.taper in one run 10.0 mm - Different types of bevel possible

Furnishing: - Deburring of handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary burr - The sheet to be processed is manual with light pressure guided along the rotating deburring brush - Simple radial brush rotation at high speed - Materials: steel, stainless steel, aluminum, other non-ferrous metals

The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control

Furnishing: - heavy / robust manual swivel bending machine - with counterweight - manual angle fixed stop - manual adjustment of the lower beam at the front - manual adjustment of the lower beam at the rear - Hand wheel for manual adjustment of the upper beam - Insert / bending tool

Furnishing: - heavy / robust swivel bending machine - Bending angle adjustment via electric potentiometer - bending tools - Double foot switch - Operating instructions in German (PDF)

Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Description: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - Standard with automatic quill feed - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Guaranteed concentricity = 0.02 mm measured in the quill - Comes with a coolant device as standard - Powerful drive motor even with continuous operation - Robust drilling machines for industrial use Furnishing : - Key chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Reduction sleeve MK 3/2 - coolant device - Separate emergency stop button - Height-adjustable protective cover

Furnishing: - Machine base - horizontal and vertical work use - foot switch - standard rollers (divided) - 2 driven rollers - CE mark / declaration of conformity - Operating instructions in German

Furnishing: - conventional hydraulic press brake - with NUOVA control digital display - swiveling control panel - electrical backgauge * with recirculating ball screws - adjustment range 620 mm * with 2x manually adjustable stop fingers - electrical adjustment of the immersion depth - divided upper tools - divided lower tools in the die shoe - 2x front support arms - 2hand / foot control

Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable

Furnishing: - HACO CNC control model ROBOSOFT BC 50 * 9 "LCD screen * Tool library for 30x punches / 30x dies * automatic calculation of tonnage - Upper tool holder with wedge crown - Die table with manual crowning - Lower tool / split 4-fold die 60x60 - Upper tool / split deer foot - 2x manually adjustable backgauge fingers - 2 hand control / foot switch - Operating instructions: machine and control

- Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Quick and easy bending process using a bow handle - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Furnishing : - Segmented upper cheek - Segmented lower cheek - Foot clamp - Fixed stop angle adjustment

** Special price / on request ** List price: 6,340 euros Our SOLIDscrew screw compressors in the standard version you get from 4 to 75 kW. The particularly effective aftercooler and the Microprocessor controls SOLIDcontrol are one of SOLIDair's A matter of course! The extensive equipment of the SOLIDcontrol allows it is possible to connect it to a higher-level controller at any time The solid design, the removable doors and good accessibility for all Components make maintenance a breeze. Furnishing: - Industrial screw compressor - SOLIDcontrol control ** microprocessor ** Automatic selection of the most favorable operating mode depending on the compressed air requirement ** Automatic optimization of the motor switching cycles ** Pressure recording via pressure transmitter ** Integrated test mode of the outputs ** Connection for higher-level control

Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust support structure made of steel - Painted in RAL 2000 with a low weight - Galvanized longitudinal traverse with a length of 2,400 mm - 3x galvanized crossbars with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the crossbar - Stable sheet metal pocket for your crane control - Operation "suction / release" by means of a hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with acoustic signal generator * Vacuum meter with danger zone display * Large vacuum storage container with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - documentation * Special accessories included: - 6x ball valves for switching off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or crossbars

characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Description: - 3000 mm roller and measuring track type Exakt-C without scale and stop - Basic version: feed roller conveyor - Rollers and measuring track in stable steel construction - all versions are stationary - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with a Ø 15 mm axle - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web width 300 mm, usable roll width 250 mm - Construction height 880 mm +/- 60 mm. - Color: feet anthracite gray RAL 7016, upper part silver gray RAL 7042

Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

** GKN authorized dealer - other models on request Furnishing: -Transport chassis with swivel and fixed castors

Furnishing: - CYBELEC DNC 880 S numerical CNC control * Windows XP interface * 10 "TFT color screen * simplified keyboard with large keys * graphic representation in 2D * Display of the bending processes * swiveling control panel - controlled axes: Y1 + Y2 + X + R axis - electrical backgauge (X axis) - electrical height adjustment from the back gauge (R axis) - 4x manually adjustable stop fingers - Upper tool holder with wedge crown - various tools - foot switch - Original instruction manual (machine + control)

Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Scope of delivery : - Segmented upper cheek - Segmented lower cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

** Special price / on request ** List price: 4,990 euros Furnishing: - V-belt driven, robust, stationary piston compressor - mounted on a horizontal 500 liter container - for industrial applications - solid construction - High efficiency - low-wear barrel - Compressor pumps in two-stage design - The container is manufactured in accordance with Directive 2009/105 / EC - Condor quality pressure switch, including operating hours counter

Furnishing: - manual bending machine - with asymmetrical roller arrangement - manual adjustment of the lower roller - manual adjustment of the rear roller - hand crank - Swiveling top roller, with folding bearing

characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Furnishing: - manual bending machine - with asymmetrical roller arrangement - manual adjustment of the lower roller - manual adjustment of the rear roller - hand crank - Swiveling top roller, with folding bearing

Properties: for light milling work on table or crevice drilling machines Ground clamping surface Dovetail guide adjustable by means of wedge lines

** from a vocational school (!!) ** very good condition Heraeus is one of the leading manufacturers of furnaces for heat treatment in Laboratories, craft and industry. Solidly constructed, high-quality components. Especially for material testing or heat treatment of welded or additively constructed construction parts, tempering, annealing etc. Furnishing: - HERAEUS hardening / chamber / annealing furnace - for heat treatment of metal - Infinitely adjustable temperature - for workshop use - front - hinged door - front degree indicator - timer

** Special price / on request ** List price: 4,520 euros Furnishing: - V-belt driven, robust, stationary piston compressor - mounted on a horizontal 500 liter container - for industrial applications - solid construction - High efficiency - low-wear barrel - Compressor pumps in two-stage design - The container is manufactured in accordance with Directive 2009/105 / EC - Condor quality pressure switch, including operating hours counter

Furnishing : - stable and robust construction - simple and problem-free operation - with 4x cutting speeds - Machine head, guided vertically - with dovetail guide and adjustable wedge ledge - Can be swiveled 45 ° to the left and 60 ° to the right - with lock at 45 °, 0 °, -45 °, -60 ° - Reduction gear running quietly in the oil bath - pneumatic quick clamping vice - pneumatic vertical clamping unit - main switch - Quality Made in Europe Functioning semi-automatic - Close the vice and activate the motor - Lowering the saw head to cut - Stop the motor and return the saw head to its starting position - Open the vice

Furnishing: - Miter cuts up to 60 ° left - cutting speed 35 + 70 m / min - Vice with quick clamping device - Belt tension control - machine base - electric automatic cooling - Operation manual Auto-cut system = 3-step system - Automatic lowering of the saw frame via the hydraulic cylinder - infinitely adjustable feed - with limit switch - High speed lowering of the saw frame from the rest position to the workpiece - then switch to normal saw feed - Manual mode

Furnishing: the AK BEND rotators are particularly suitable for handling complex Workpieces to process these rotators can be large Regulate differences in diameter by yourself - self-regulating rotators - PU coated wheels - Remote control of the rotators for left / right run, as well as the rotational speeds readable via digital display

** from a vocational school (!!) Heraeus is one of the leading manufacturers of furnaces for heat treatment in Laboratories, craft and industry. Solidly constructed, high-quality components. Especially for material testing or heat treatment of welded or additively constructed construction parts, tempering, annealing etc. Furnishing: - HERAEUS hardening / chamber / annealing furnace - for heat treatment of metal - Infinitely adjustable temperature - for workshop use - front - hinged door - front degree indicator - timer

Stable turning The HGK_Series has two synchronously operating drive units that are used for ensure continuous rotation with stepless speed control. The Roller spacing can be increased and decreased manually by means of socket pins in order to achieve a large diameter range of the workpieces. Properties: - For turning and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU rollers - The adjustment takes place via bolts - Remote control Scope of delivery: - 1x control

** New price, with accessories ~ 18.000 euros Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick * Special accessories included: - MEP feed roller conveyor - 3.000 mm - MEP discharge roller conveyor K100 - 3.000 mm

Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German

** Special price / on request ** List price: 3,360 euros Furnishing: - space-saving, stationary piston compressor - with standing container - including star-delta contactor combination - Condor quality pressure switch - with operating hours counter

Furnishing: - electric folding machine - Bending angle preselection via electrical potentiometer - powerful drive motors - manual lower beam adjustment - Double foot switch - Operation manual

Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch

Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Furnishing: - various replacement rollers - hand crank - front stop

Description: - 3000 mm roller and measuring track type Exakt A standard - with digital position indicator el. connection 230 V 50 HZ with power pack - Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm) - Measuring stop can be adjusted from the workplace by means of a hand wheel - with pneumatic brake for fixing the dimensions. - Stable material stop trolley, 12 ball bearings - on a large guide profile. - The stop is adjustable and can be folded back manually. - Basic version of roller and measuring track - in stable steel construction, all versions are stationary - The max.measuring length is the track length minus 450 mm - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with axis Ø 15 mm - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web width: 500 mm, usable roll width 450 mm - Construction height: 880 +/- 60 mm - Color: feet anthracite gray RAL 7016, upper part silver gray RAL 7042 - Attachment side

Furnishing: - 5 sets of rollers - motor-driven beading machine - foot switch - Operating instructions in German - CE mark / declaration of conformity

Furnishing: - maintenance-free drive / high repeat accuracy - Hexagon tool holder 40 mm - Easily programmable bending angle control - 79 memory locations for bending angles - automatic bending angle sequence * for 20 memory locations * with 20 angle sequences each - Left bending direction - max. 180 ° - compact design, easy to transport - Double foot switch - Operation manual ** including special accessories: - many application tools (!!) - 1x mandrel bending attachment DB 42 - Version: 6,000 mm * for bending narrow balustrades up to 42.4 mm * with a radius of 2 x D - mandrel carrier with precise. Length measuring carriage and adjustable round shaft guide - Rotation angle chuck for repeatability of the pipe rotation 0-360 ° - hydraulic mandrel retraction with hand pump - central mandrel lubrication with hand pump & container - Stop system can be driven over with measuring rail

** from a maintenance workshop ** very good condition (!!) Furnishing: - hydraulic profile steel shears - Punching station, flat steel shears, angle steel shears, profile steel shears - stepless adjustment of the stroke - very compact design - Support table at the notching and punching station - Quick change device on the punching side - Square notchers - Protective devices at work stations - foot switch

Furnishing: - Miter cuts left 60 ° + right 45 ° - cutting speed 37 + 74 m / min. - Ball-bearing turntable for easy miter adjustment (durable) - Movable quick-release vice - Quick release lever - easy miter adjustment - for sawing solid material and profiles - Machine base with automatic cooling - electrical display and monitoring of the machine - Operation manual Auto-cut system = 3-step system - Automatic lowering of the saw frame via the hydraulic cylinder - infinitely adjustable feed - with limit switch - High speed lowering of the saw frame from the rest position to the workpiece - then switch to normal saw feed - Manual mode

** Special price / on request ** List price: 3,750 euros Furnishing: - space-saving, stationary piston compressor - with standing container - including star-delta contactor combination - Condor quality pressure switch - with operating hours counter

** from a maintenance workshop ** very good condition (!!) Furnishing: - hydraulic profile steel shears - Punching station, flat steel shears, angle steel shears, profile steel shears - stepless adjustment of the stroke - Notification table on the notcher - Hold-down on the tin snips - 2x foot switches - sheet metal scraper - Operation manual further techn. Data : FLAT STEEL SHEARS Flat steel with little deformation up to: 380 x 10 mm or: 300 x 12 mm or: 200 x 14 mm or: 150 x 14 mm or: 80 x 19 mm Knife cutting length: 380 mm PROFILE STEEL SHEARS Shear cross section max .: 2000 mm² Infinitely adjustable stroke: 15 - 30 mm shears with angled steel knife 90/45 ° L-steel 90 ° cut up to: 100 x 10 mm L-steel 45 ° cut up to: 65 x 8 mm L-steel with unequal legs up to: 100 x 75 x 10 mm NOTCHER Square notcher sheets up to: 10 mm L-steel up to: 75 x 8 mm U-steel in the flange: 80 - 120 mm I-steel in the flange: 80 - 140 mm Notch width: 52 mm Notch depth: 70 mm HOLE PUNCH Infinitely adjustable stroke: 10 - 26 mm holes with punching table: 27 in 11 mm U-steel in the flange: 80 - 260 mm I-steel in the flange: 80 - 260 mm U-steel in the web: 80 - 300 mm I-steel in the web: 80 - 340 mm Punch projection: 382 mm Number of strokes of the punch with 20 mm stroke: 30 min-1 Number of strokes of the scissors at 20 mm stroke: 20 min-1

Furnishing: the AK BEND rotators are particularly suitable for handling complex Workpieces to process these rotators can be large Regulate differences in diameter by yourself - self-regulating rotators - PU coated wheels - Remote control of the rotators for left / right run, as well as the rotational speeds readable via digital display

** from a vocational training center ** very good condition (!!) Furnishing: - robust / motorized swing cut guillotine shears - Shatterproof, torsion-free welded steel construction - compact and clear machine construction - electrical backgauge with analog display * Fine adjustment via handwheel - All-steel double-edged knife (sharpened) - 1x hold-down bar - 1x long side stop - 2x long support arms - foot switch

Description: The A + B PN 60/76 is a multifunctional grinding machine for pipe and Profile end grinding on the front, for grinding edges, surfaces and for cylindrical grinding on the back as well as for surface grinding on the Machine top. Scope of delivery: ++ including 7x grinding rollers - sanding belt - Hinged protective screen - Sanding and support table - Dust extraction nozzle - Required instructions

Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower

Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge ** Model with 10 to. Lifting capacity also available

Furnishing: - hydraulic hole punch / punching machine - with horizontal turret unit * 6x stations for stamps * 6x stations for dies - Material support table - hydraulic sheet scraper - stepless stroke adjustment - Selector switch for: * Tool change * Setting mode * Working mode - automatic central lubrication unit - foot switch - Operating instructions (NL)

Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle ** including: integrated suction **

Furnishing: - with tandem rollers - Nylon fork rollers - Rubber swivel castors - Fork width 160 mm

** Special price / on request ** List price: 7.010 euros Our SOLIDscrew screw compressors in the standard version you get from 4 to 75 kW. The particularly effective aftercooler and the Microprocessor controls SOLIDcontrol are one of SOLIDair's A matter of course! The extensive equipment of the SOLIDcontrol allows it is possible to connect them to a higher-level controller at any time. The solid design, the removable doors and good accessibility for all Components make maintenance a breeze. the following variants are possible: - Maximum pressure 7.5 bar - 2.52 m³ / min. - Maximum pressure 10.0 bar - 2.20 m³ / min. - Maximum pressure 13.0 bar - 1.85 m³ / min. Furnishing: - Industrial screw compressor - SOLIDcontrol control ** microprocessor ** Automatic selection of the most favorable operating mode depending on the compressed air requirement ** Automatic optimization of the motor switching cycles ** Pressure recording via pressure transmitter ** Integrated test mode of the outputs ** Connection for higher-level control

** Special price / on request ** List price: 1,800 euros Furnishing: - Mobile piston compressor / easy handling - The tried and tested for professional craft and industrial companies. - V unit with proven solid compressor technology - oil-lubricated - V-belt drive - two-stage - Stopcock on the container

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 10.190 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer * working automatically with pre- and post-filter (mounted)

Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Furnishing : - Universal milling head, adjustable to all angular positions - Swiveling control panel with ergonomically mounted switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable V-ledges in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Standard with automatic table feed in x and y axes - Precise surface-machined cross table with T-slots - Digital position display for x, y and z axes included in the scope of delivery scope of delivery : - 3-axis digital display ES-12 H with LCD display - LED machine light - coolant device - Central lubrication - counter bearing - Long milling arbor 32 mm - Feed for x- and y-axis - Positioner motor for z-axis - coolant pan - Adjustable guard - operating tool

Furnishing: - Hydraulic press / differential path press - 2 hand control / foot switch - vibrating elements - Instructions for use

Furnishing : - hydraulic swing cut shears - electrical backgauge, travel 1,000 mm * with ELGO / SWISSAX digital display or positioning unit * autom. Unfold in the end position * with ball screws and toothed belt drive - electrical cutting gap adjustment - electrical cutting length limitation - 1x extra long side stop - 3x extra long support arms - foot switch - Required instructions

** current new price ~ 12.000 euros Furnishing : - Special model: with transparent hood - Drilling depth adjustment with fine adjustment and undervoltage release - EMERGENCY STOP button - Infinitely variable speed control - Drill protection with electr. validation - Thermal overload protection - Digital drilling depth, speed and feed display - Electronically infinitely variable feed including spindle monitoring - Free cutting device - Thread cutting device, thread cutting capacity max.M30 - Setting the thread cutting depth via digital depth display - drilling depth switch-off; programmable; easy handling - Drill cross with push button for switching the feed on / off - machine lighting

Furnishing: - Swivel arm cup grinder - manual height adjustment of the grinding spindle - T-slot work table, with vice - Machine base - Coolant device, with container

Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover