Skip navigation

Machines

EHT EASYPRESS 85-20, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

EASYPRESS 85-20

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** with increased installation height / piston stroke ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Lagernummer:
1008-9308402
pressure:
85.0 t
chamfer lenght:
2050 mm
distance between columns:
1650 mm
column arm:
400 mm
FASTI TCHE 12/4, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

FASTI

TCHE 12/4

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** Machine from a technical college - prototype construction ** very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325278

Lagernummer:
1008-9325278
sheet width - max.:
1255 mm
plate thickness:
4,0 mm ST
plate thickness:
2,0 mm VA
plate thickness:
6,0 mm ALU
ATLANTIC HPAT 40.300, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ATLANTIC

HPAT 40.300

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Lagernummer:
1008-9308408
pressure:
300 t
chamfer lenght:
4100 mm
distance between columns:
3710 mm
stroke - stepless adjustable:
250 mm
MOESSNER SM 420, Metal Processing, Saws, Band Saw - Vertical

MOESSNER

SM 420

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

** from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base * Machinevideo : https://www.youtube.com/watch?v=UVpE_bLGHa0

Lagernummer:
1008-9173296
roll diameter:
420 mm
throat:
410 mm
workpiece height:
295 mm
cutting speed:
12 - 375 m/min
ATLANTIC ATS 3000, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ATLANTIC

ATS 3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** maintained condition (!!) Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF)

Lagernummer:
1008-9325346
sheet width:
3050 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
cutting angle:
0.5 - 3.0 °
WEILER COMMODOR, Metal Processing, Lathes, lathe-conventional-electronic

WEILER

COMMODOR

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Basic functions are available ** Machine with various leaks ** Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - https://www.youtube.com/watch?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front - adjustable bed stop - Coolant system including coolant pan - User manual (PDF)

Lagernummer:
1008-9207345
turning length:
1000 mm
turning diameter over bed:
380 mm
turning diameter over slide rest:
190 mm
number of spindle speeds:
25 - 2000 U/min.
FALKEN 4 R HMS 1550 x 150, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

FALKEN

4 R HMS 1550 x 150

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

** Exhibition machine - NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Lagernummer:
1008-8405521
sheet width:
1550 mm
plate thickness:
6.5 mm
pre-bending:
4.5 mm
diameter of upper rolls:
150 mm
HACO HSLX 4006, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

HACO

HSLX 4006

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** Machine made from light metal production (ALU) ** good condition ** including special accessories such as sheet metal holding device - in checked condition - machine video - https://www.youtube.com/watch?v=pv7RRijDXJA Furnishing: - electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left * Pre-selection positioning of the backgauge * Digital display of actual position value * electro-hydraulic cutting angle adjustment * electro-hydraulic cutting gap adjustment * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-hydraulic cutting gap adjustment - electro-hydraulic cutting angle adjustment - electro-motorized back gauge, on ball screws - hydraulic hold-down devices - front finger protection - Ball rollers in the support table - 1x side stop, with mm scale - 1x freely movable foot switch - rear guard - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * for sheet thicknesses up to max. 4.0 mm * optimal positioning of thin sheets

Lagernummer:
1008-9325354
sheet width:
4050 mm
plate thickness:
6.50 mm
thickness at "Niro-steel":
4.00 mm
back stop - adjustable:
1000 mm
SCHROEDER MHSU 1500 x 2.0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHROEDER

MHSU 1500 x 2.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display * adjustable from behind * stepless adjustment over the entire travel range * travel range max. 725 mm - 1x hold-down bar - 1x freely movable foot switch - front, extendable table extension - connection cable + plug

Lagernummer:
1008-9325389
sheet width:
1530 mm
plate thickness:
2.0 mm
thickness at "Niro-steel":
1.0 mm
no. of strokes:
max. 34 Hub/min
PEDDINGHAUS HYDRAULIC 1001, Metal Processing, Stamping press, Punching Press

PEDDINGHAUS

HYDRAULIC 1001

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** maintained condition (!!) ** New price without accessories approx. 25.000 euros ** Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Lagernummer:
1008-9412178
pressure:
100 t
punching cross-cut in cmm:
Ø 31 in 25 mm
stroke:
10 - 50 mm
column arm:
510 mm
HEZINGER B10-3000, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

HEZINGER

B10-3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** New price from 56.000 euros ** Special price on request Furnishing: - electro-hydraulic sheet metal plate shears "oscillating cut" - ELGO NC control - model "P40T Touch", front left control panel - CNC electro-motorized back gauge, with ball screws * including retraction function selectable * Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSLER rear protection device - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325300

Lagernummer:
1008-9325300
sheet width:
3100 mm
plate thickness:
10.0 mm
thickness at "Niro-steel":
6.0 mm
cutting angle:
2.0 °
ERMAK GMR 2100x4, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

ERMAK

GMR 2100x4

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** from a training workshop (!!) ** current new price approx. 30.000 euros ** special price on request Equipment: - robust / electro-motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop * including ELGO NC digital control unit * back stop with recirculating ball screws - manual cutting gap adjustment (eccentric) - machine side stand with projection - front finger guard - 1x hold-down bar - 1x freely movable foot switch including emergency stop button - 1x side stop including mm scale - 1x front support arm - rear sheet metal slide - rear safety device - operating instructions (PDF)

Lagernummer:
1008-9325370
sheet width:
2100 mm
plate thickness:
4.0 mm
thickness at "Niro-steel":
2.5 mm
no. of strokes:
42 Hub/min
BAYKAL APH 3110 x 180, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APH 3110 x 180

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Lagernummer:
1008-9308421
pressure:
180 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
throat:
310 mm
HACO ERMS 30-135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

ERMS 30-135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine from a maintenance workshop ** good condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=-PSlfcCNk0I Equipment: - CNC electro-hydraulic press brake - HACO CNC control model "ATS 6000" graphic control * dust-proof 10" color graphic TFT screen * manual setting in the program: switching point fast-slow + TDC * retraction back stop * piece counter * material + tool library * bending work via immersion depth, angle or pressure * swiveling operation front left - CNC electric depth adjustment (Y1+Y2 axis) - CNC electro-motor back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) * max. travel range .. 600 mm * max. travel speed .. 400 mm/sec * back stop programmable with an accuracy of 0.1 mm - manual table crowning including analogue value display - upper tool adapter, with Wedge camber (AMADA system) * split deer foot upper tool - lower tool rail for AMADA system tools * new split 4V die (16/22/35/50 mm opening) - rear + side protective device (swivel + sliding doors) - 1x freely movable double foot switch - machine + control operating instructions (PDF) * Special accessories included: - new set of UKB 4V dies, split (V openings 16/22/35/50 mm)

Lagernummer:
1008-9308403
pressure:
135 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
250 mm
MAXION BS MK 3, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

MAXION

BS MK 3

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** from a training workshop ** maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103754

Lagernummer:
1008-9103754
Boring power:
32.0 mm
bore capacity in cast iron:
35.0 mm
morse taper:
MK 3
spindle stroke:
120 mm
ATLANTIC ATS 3012, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ATLANTIC

ATS 3012

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Equipment: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 * Pre-selected positioning from the back stop * Digital display of the actual value * electro-hydraulic cutting angle adjustment with digital display * programmable retraction from the back stop * programmable cutting length limitation * EMERGENCY OFF switch - NC electro-motorized back stop, on ball screws - manual cutting gap adjustment, adjustable from the front - finger protection at the front - 1x side stop .. 1,000 mm - 2x front support arms - protective device behind the machine - rear sheet metal slide - 1x freely movable foot switch - original operating instructions

Lagernummer:
1008-9325386
sheet width:
3050 mm
plate thickness:
12.0 mm ST
plate thickness:
8.0 mm VA
no. of strokes:
7 - 14 Hub/min
BERNARDO MRA-Pro, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

MRA-Pro

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Lagernummer:
1008-8390110
plate thickness:
3,0 mm
tube diameter:
60,0 mm
motor:
230 Volt
total power requirement:
1,1 kW
INDUMASCH VA 200/8, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

INDUMASCH

VA 200/8

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

** from a maintenance workshop ** New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397087

Lagernummer:
1008-9397087
plate thickness:
8.0 mm ST
plate thickness:
5.0 mm VA
table-size:
1000 x 950 mm
blade length:
200 x 200 mm
CIDAN MS M 10/3,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

CIDAN

MS M 10/3,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325126

Lagernummer:
1008-9325126
sheet width:
1050 mm
plate thickness:
3.0 mm
thickness at "Niro-steel":
1.5 mm
no. of strokes:
35 Hub/min
PLACKE EQPB 2 - 50/1275, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

PLACKE

EQPB 2 - 50/1275

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** current new price approx. 80.000 euros ** special price on request ** good / well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=5L8L2AYv0PU ------------------------------------------------------- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ------------------------------------------------------ Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

Lagernummer:
1008-9308409
pressure:
50.0 t
chamfer lenght:
1275 mm
distance between columns:
1040 mm
column arm:
250 mm
RAS 83.20, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

RAS

83.20

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325338

Lagernummer:
1008-9325338
sheet width:
2040 mm
plate thickness:
3.0 mm
thickness at "Niro-steel":
1.5 mm
no. of strokes:
50 Hub/min
BERNARDO KRPS 100 x 2000 DUO, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

KRPS 100 x 2000 DUO

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** New price including accessories approx. 2.000 euros ** Special price on request ** Grinding rolls included in delivery The KRPS DUO is a multifunctional grinding machine for pipe and profile end grinding on the front, for grinding edges, surfaces and for circular grinding on the back as well as for surface grinding on thetop of the machine. Equipment: - Consistent belt tension thanks to spring-loaded clamping device - Standard with circular grinding device - for grinding diameters of diam. 20 - 76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the surface grinding surface increases . the sliding properties of the grinding belt - Large-dimensioned surface grinding surface with protective cover - Slow belt speed (15 m/sec.) - ideal for grinding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30° to 90° are easily possible - Shorter processing times compared to milling * Special accessories included - 5x grinding rollers

Lagernummer:
1008-9239002
width of the strips:
100 mm
band length:
2000 mm
band speed:
15.0 + 30.0 m/sec
tube diameter:
20 - 76 mm
FEIN GRIT GX 75 2H, Metal Processing, Grinding machines, Belt Grinding Machine

FEIN

GRIT GX 75 2H

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** including FEIN / GRIT radius grinding module "GXR" ** New price including accessories approx. 2.500 euros ** Special price on request Equipment: - Powerful belt sander with 2x belt speeds - Speeds optimal for metal processing with 1500 + 3000 rpm - Height-adjustable surface grinding table for linear surface grinding - Connection option for external extraction - Working height individually adjustable - Patented belt tensioning system - Robust three-phase motor - Low vibration * Special accessories included: - FEIN GRIT GXR radius grinding module + grinding rollers * Radius grinding module for precise grinding . on pipes, profiles and flat materials * Pipes .. up to Ø 16 - 75 mm * Belt dimensions .. 75 x 2250 mm * Weight 54.0 kg - Replacement sanding belts (75 mm wide)

Lagernummer:
1008-9239000
width of the strips:
75.0 mm
band length:
2000 / 2250 mm
band speed:
15.0 + 34.0 m/sec
voltage:
3x 400 V
ORADEA FUS 32, Metal Processing, Milling machines, Universal Milling Machine

ORADEA

FUS 32

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a training workshop - good condition (!!) ** New price ~ 25.000 euros Equipment: - electro-motorized universal milling machine - ACURITE 3-axis digital display - electro-motorized adjustment of all axes (X/Y/Z axis) * ball screws X and Y axis * rapid traverse in all 3x directions * electrical locking of all axes - electromagnetic brake for spindle stop * foldable milling spindle guard - coolant system - lower chip tray - vertical milling head with quill adjustment * milling head rotation 90° * tool holder ISO 40 with internal thread M16 - fixed box table 950 x 450 mm * number / size of T-slots 7 pieces / 14.0 mm * distance between T-slots 63.0 mm * minimum distance between base table / spindle axis 163 mm - Counterholder block for horizontal milling - Halogen lighting - Slatted cover on the vertical column guide - 4x machine feet - Central lubrication including container - Original operating instructions

Lagernummer:
1008-9131212
x-travel:
560 mm
y-travel:
320 mm
z-travel:
400 mm
turning speeds:
25 - 2000 U/min
DURMA SBT 3006 NT, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

DURMA

SBT 3006 NT

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop (!!) ** good condition ** new price ~ 35.000 euros -------------------------------------------- electric / hydraulic swing cut shears * with DURMA ENC 100 control * manual cutting gap adjustment -------------------------------------------- Equipment: - NC electro-hydraulic swing cut shears - with NC control - DURMA "ENC 100", pivoting - front left * back stop pre-selection - X axis * quantity * cutting length limitation * pivoting operation, front left - NC electro-motor-controlled back stop * travel = 1.000 mm (X axis) * on ball screws * travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down device - 1x side stop 1.500 mm including mm scale - 2x front support arms 1.000 mm - ball rollers in the front support table * including recessed grips - hinged finger guard, with safety switch - 1x freely movable foot switch - original operating instructions

Lagernummer:
1008-9325366
sheet width:
3100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
distance between columns:
3120 mm
EHT TSS 4-31, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

EHT

TSS 4-31

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram ** Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Lagernummer:
1008-9325371
sheet width:
3100 mm
plate thickness:
4.0 mm
thickness at "Niro-steel":
2.5 mm
cutting angle adjustment:
1.0 °
MEP SHARK 332 CCS, Metal Processing, Saws, Band Saw

MEP

SHARK 332 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** New price ~ 11.500 euros Furnishing: - automatic lowering of the saw arch, with steplessly adjustable feed - with limit stop at the end of the cut - manual / semi-semi-automatic function selectable - 2x saw band speeds - large bearing turntable, for miter cuts from 45° right - 60° left - Vice manually adjustable on both sides - manual material clamping - 1x saw band - rotating chip removal brush - Control panel - front right - hydraulic pressure cell for saw blade tension * with digital indication of the clamping force - User manual in German * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173340

Lagernummer:
1008-9173340
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
FASTI 904-80-25, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

FASTI

904-80-25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine from a vocational training center (Chamber of Crafts) ** good / well-maintained condition ** with only approx. 1.300 operating hours (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=dDqs4LioL_g Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library - CNC axis control: Y1 - Y2 - X axis + motorized crowning - electro-motorized & controlled back stop * with 2x manually movable stop fingers (R + Z axis) - manual upper tool & lower tool clamping - split upper and lower tools * Upper tool length .. 2.380 mm * Lower tool length .. 2.100 mm .. holder 30.0 mm * additional tools (pieced together) - 2x stable, front support arms - movable including mm scale - 1x freely movable 2-hand operation - 1x freely movable foot switch - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions for control

Lagernummer:
1008-9308382
pressure:
80.0 t
chamfer lenght:
2550 mm
distance between columns:
2060 mm
ajustment speed:
90.0 mm/sec
TRUMPF TRUMABEND V 130, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND V 130

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

- in checked condition - machine video - https://www.youtube.com/watch?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram

Lagernummer:
1008-9308396
pressure:
130 t
chamfer lenght:
3060 mm
distance between columns:
2690 mm
column arm:
410 mm
RAS 73.30, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

RAS

73.30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** New price approx. 85.000 euros ** Machine with only approx. 1.000 operating hours (!!) ** good condition (!!) ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Lagernummer:
1008-9355218
sheet width:
3200 mm
plate thickness:
3.0 mm ST
thickness at "Niro-steel":
2.0 mm
Opening width / upper beam:
300 mm
PEHAKA V 400, Metal Processing, Saws, Band Saw - Vertical

PEHAKA

V 400

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

** good / well-maintained condition (!!) Equipment: - electro-motoric / robust, vertical band saw machine - continuously adjustable saw blade speed * Adjustment range via handwheel .. 25 - 150 m/min. - continuously adjustable height of the blade guide - continuously adjustable saw blade width - solid work table - machine base frame - control cabinet with main switch

Lagernummer:
1008-9173377
roll diameter:
400 mm
throat:
385 mm
workpiece height:
max. 335 mm
cutting speed:
25 - 150 m/min
RAS 82.25, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

RAS

82.25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) ** Special accessories included: - sheet metal holding device for thin sheet metal cuts

Lagernummer:
1008-9325390
sheet width:
2540 mm
plate thickness:
2.00 mm
thickness at "Niro-steel":
1.25 mm
no. of strokes:
max. 63 Hub/min
RAGNAR HYDR 5-24, Metal Processing, Threading machines, Thread-Cutting Machine

RAGNAR

HYDR 5-24

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

** New price approx. 4.500 euros ** rarely used (!!) ** Special price on request Equipment: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disc * smooth swivel movement thanks to built-in gas pressure dampers, among other things - mobile machine base frame * oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - stepless speed adjustment - vertical / horizontal thread cutting possible - lateral sorting of the quick-change inserts possible - connection cable with 16A plug

Lagernummer:
1008-9103772
thread dia.:
bis M 24
turning speeds:
0-600 / 0-150 U/min
thread:
M5 - M24
working area:
2050 Rmax.
DONAU DR 40 Z, Metal Processing, Boring mills / Machining Centers / Drilling machines, Rapid Radial Drilling Machine

DONAU

DR 40 Z

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Rapid Radial Drilling Machine

** well-maintained condition ** current new price approx. 60.000 euros ** with lots of special accessories (!!) ** special price on request Equipment: - electro-hydraulic, robust high-speed radial drilling machine - compact design with hydraulic quick clamping - 3x speed ranges (56.0 - 2.800 rpm) - electro-motor height adjustment - pole-changing drive motor - R/L running of the work spindle - manual & automatic spindle feed * feed rows: 0.075/0.15/0.30/0.45/0.60 mm/rev - large work table with 5x T-slots (distance 125 mm/width 18.0 mm) - thread cutting device - coolant device in the machine base - EMERGENCY OFF button at the front - adjustable machine light (230V) - 1x heavy RÖHM machine vice - 1x quick-change tool holder with a large number of inserts - Central lubrication - T-slots = Can be clamped at the back of the machine - Original operating instructions + machine card Other technical data: - Distance... spindle center - column: * min. 305 mm / max. 1.305 mm - Distance... spindle nose - base plate: * min. 1150 mm / max. 1.600 mm

Lagernummer:
1008-9111001
bore capacity in steel (diameter):
40.0 mm
bore capacity in cast iron:
50.0 mm
thread:
M 33 St 60
thread:
M 45 GG 22
AK BEND AS-M 90-10/3.0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

AS-M 90-10/3.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** New price approx. 6.000 euros ** Demonstration machine from our exhibition - like NEW (!!) ** Special price on request Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be manually swiveled out, with folding bearing - including conical bending device - freely movable control panel - lower roller can be manually adjusted, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Lagernummer:
1008-9401287
sheet width:
1050 mm
plate thickness:
3.3 mm
pre-bending:
3.0 mm
roll length:
1050 mm
MAXION BS 20, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

MAXION

BS 20

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** Machine from a vocational school (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=WGhTKBNBT2E Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug

Lagernummer:
1008-9103742
bore capacity in steel (diameter):
20.0 mm
bore capacity in cast iron:
25.0 mm
throat:
210 mm
bore stroke:
100 mm
VDF HEIDENREICH & HARBECK 21 RO / 1250, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** well-maintained condition ** with lots of special accessories (!!) Equipment: - robust lead/spindle lathe - RÖHM 3-jaw chuck Ø 250 mm, including replacement jaws - 3-jaw chuck Ø 315 mm, including replacement jaws - Longitudinal feed, with rapid traverse - Face feed, with rapid traverse - MULTIFIX tool holder with 8x inserts - Key for jaw chuck - Bed stop + bed slide can be firmly clamped - Movable tailstock, including live center - Operating instructions (PDF)

Lagernummer:
1008-9207359
turning length:
1250 mm
turning diameter over bed:
430 mm
turning diameter over slide rest:
260 mm
bed width:
333 mm
FORMAT TS2-1000-50, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

FORMAT

TS2-1000-50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch

Lagernummer:
1008-9325255
sheet width:
1050 mm
plate thickness:
3,0 mm ST
cutting angle:
2,0 °
stroke max.:
38 p. Min.
BOSCHERT EL 500 Digital, Metal Processing, Stamping press, Punching Press

BOSCHERT

EL 500 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** New price including accessories approx. 30.000 euros ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=VU9BWm7SC2g The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y positioned accordingly and the material pushed to the stops. Through Pressing the foot pedal will then punch the hole Features of the machine: • Maintenance-free hydraulic drive • Infinitely variable stroke adjustment • Compact unit • Constant punching force Furnishing: - robust electro-hydraulic hole punch - TRUMPF tool system with many application tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * scanning head integrated in the stops * Energy chains for supply cable to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Staking device for zeroing the axes * Reading accuracy +/- 0.1 mm - Control panel: setup, single and continuous stroke - stepless lifting height adjustment - 1x pallet/box with application tools - freely movable foot switch * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412165

Lagernummer:
1008-9412165
sheet width:
500 mm
plate length:
1000 mm
plate thickness:
max. 6,0 mm
pressure:
28,0 t
FLOTT SB 23 S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

FLOTT

SB 23 S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** maintained condition (!!) Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103760

Lagernummer:
1008-9103760
Boring power:
23.0 / 28.0 mm
Boring depth max.:
140 mm
Center of spindle to wall or column:
300 mm
Column diameter:
125 mm
UNICUM 8", Metal Processing, Grinding machines, Flaring Cup Wheel Grinding Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Flaring Cup Wheel Grinding Machine

** good / well-maintained condition (!!) Equipment: - electric swivel arm cup grinder - magnetic clamping plate .. 400 x 200 mm - 1x replacement grinding wheel .. 200x70x32 mm - manual feed via handwheel (grinding head) - machine base frame

Lagernummer:
1008-9238997
grinding length:
350 mm
grinding width:
150 mm
workpiece height:
150 mm
spindle turning speed range:
2800 U/min
HACO PPM 30.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPM 30.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good / well-maintained condition (!!) Equipment: - simple NC-controlled hydraulic press brake * including torsion shaft - including ATLANTIC NC control ATL 550 * positioning of the back stop (X) * positioning of the depth adjustment (Y1 + Y2) * swiveling control panel, front left - electro-motor, stepless depth adjustment (Y1 + Y2 axis) - electro-motor back stop (X axis) * 4x manually adjustable stop fingers - 1x split upper tool set - "HACO" holder - 1x rotatable "MULTI V" die block (lower tool) - 1x 2-hand operation - 1x freely movable foot switch - operating instructions (PDF)

Lagernummer:
1008-9308430
pressure:
135 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
stroke of upper beam:
120 mm
LOTZE K 10 / 1040 x 4,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

LOTZE

K 10 / 1040 x 4,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Machine from a maintenance workshop ** with only approx. 610 operating hours (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=sozXoeJaUIM Furnishing: - heavy / robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.0 KW) - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - 1x side stop - 2x front support arms with T-slot - manual central lubrication - Operating hours counter - Special accessories: 1x set of LOTZE replacement knives * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325309

Lagernummer:
1008-9325309
sheet width:
1040 mm
plate thickness:
4,0 mm
thickness at "Niro-steel":
2,5 mm
blade length:
1100 mm
MONDIALE CELTIC 12, Metal Processing, Lathes, lathe-conventional-electronic

MONDIALE

CELTIC 12

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Machine from a vocational school (NL) Lathe with precision-ground and induction-hardened bed. Very suitable for use in workshops and training centers, for example. Equipment: - robust lead and feed spindle lathe - K+C "ARBAH-L" digital display at the front - 3-jaw chuck including chuck bowl - foldable lathe chuck guard - swiveling tool holder guard - "DREHBLITZ" quick-change holder with 1x insert (DB70) - robust, movable tailstock - chip guard rear wall - 4x machine feet - lead and feed spindle guard - emergency stop button at the front left

Lagernummer:
1008-9207357
turning length:
525 mm
turning diameter over bed:
290 mm
turning diameter over slide rest:
160 mm
number of spindle speeds:
35 - 1500 U/min.
SIMAT PRM 30.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

SIMAT

PRM 30.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** well-maintained condition ** from a maintenance workshop (!!) Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electro-motor-driven back stop, with ball screws (X axis) * with 2x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, left-hand side - split deer foot + pointing tool - 1x rotatable Multi V universal die block - 1x freely movable 2-hand foot control - operating instructions

Lagernummer:
1008-9308395
pressure:
125 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
throat:
250 mm
SERGI EXPORT 2050 x 5.0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

SERGI

EXPORT 2050 x 5.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

- in checked condition - machine video - https://www.youtube.com/watch?v=wCioqStEx8U Equipment: - electro-motorized 3-roller round bending machine - all 3x rollers motor-driven * Rollers in mint condition (!!) * Machine has bent almost only copper - electro-motor side roller adjustment * including digital position display - manual bottom roller adjustment - with conical bending device * Inclination of the side roller * Workpiece limitation for cone with 45° incline: * Working length max: 60% * Bending performance max: 50% - hardened rollers SAE 1050 CK 45 - manual folding bearing for removing closed pipes - Safety device - 1x freely movable foot control (4x foot switch) - Connection cable + connection plug

Lagernummer:
1008-9401284
sheet width:
2050 mm
plate thickness:
5.0 mm ST
pre-bending capacity:
4.0 mm ST
upper roll diameter:
150 mm
HESKA ESB 4, Metal Processing, Saws, Band Saw - Vertical

HESKA

ESB 4

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base

Lagernummer:
1008-9173307
roll diameter:
420 mm
throat:
400 mm
workpiece height:
285 mm
cutting speed:
15 - 1400 m/min
LVD MVN 25/13, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

LVD

MVN 25/13

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop ** good condition (!!) Equipment: - heavy electro-hydraulic guillotine shears - front operation with emergency stop button - robust electro-motor-driven rear stop * adjustment from the front (+/- button) * including analog position display * travel distance approx. 1,000 mm - manual cutting gap adjustment, adjustable from the front * by handwheel * including analog value display - finger guard at the front - machine side stand with projection - 1x side stop - recessed grips in the support table - 1x freely movable foot switch - operating instructions

Lagernummer:
1008-9325388
sheet width:
2500 mm
plate thickness:
13.0 mm ST
plate thickness:
8.0 mm VA
no. of strokes:
8 - 45 Hub/min
BIGSTONE - Vollautomat CF-260 AW, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** New price ~ 18.000 euros ** very few operating hours (!) Furnishing: - column guided band saw - fully automatic - Fully automatic vise system - Feed unit ensures accurate positioning of the material * Feed length - single stroke : 400 mm - hydraulic vise clamping - hydraulic saw blade tensioning - 34 mm wide band saw blade. - Infinitely variable speed adjustment of the saw band - automatic chip conveyor - Spare bandsaw blades

Lagernummer:
1008-9173297
cutting diameter:
260 mm
saw band length:
3660 x 34 x 1,1 mm
capacity 90 degrees: flat:
280 x 260 mm
vice:
280 mm
FACCIN ASI 2-514, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FACCIN

ASI 2-514

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** very good / well-maintained condition (!!) ** Rollers in mint condition - in checked condition - machine video - https://www.youtube.com/watch?v=jporsCi7GRQ The ASI model series from FACCIN guarantees superior bending performance thanks to the asymmetrical roller arrangement. The optimal sheet movement is guaranteed by the two driven central rollers. This solution is ideal for preventing the sheet from slipping and thus for optimally processing even thin sheets. The side roller is mounted in linear guides. This linear guide allows the side roller to move very close to the clamping point, which means that a bending quality similar to the more expensive four-roller round bending machines can be achieved. Bending small profiles is possible on the extended roller journals. Equipment: - electro-motorized 3-roller round bending machine * ??with asymmetrical roller arrangement - separate control panel, with 2x digital displays - with conical bending device * inclination of the side roller * manually adjustable (lever for decoupling) * Workpiece limitation for cones with 45° incline: * max. working length: 60% * max. bending performance: 50% - hardened rollers SAE 1050 CK 45 - manual adjustment of the bottom roller * by hand crank and analog position display - manual folding bearing for removing closed pipes - roller neck extension including profile rollers - safety device - connection cable + connection plug * Special accessories included: - electro-motorized CENTER support including boom * electric height adjustment * for bending large diameters

Lagernummer:
1008-9401285
sheet width:
2050 mm
plate thickness:
5.0 mm ST
pre-bending capacity:
4.0 mm ST
upper roll diameter:
150 mm
MAHO MH 500 W/4, Metal Processing, Milling machines, Universal Milling Machine

MAHO

MH 500 W/4

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a training center ("Daimler Chrysler AG") ** Refurbished in 2006 for approx. 33.000 euros ** including new HEIDENHAIN "124" control ** very little used after general overhaul (!!) ** Operating hours - "machine ON" only: 9.676 hours - in checked condition - machine video - https://www.youtube.com/watch?v=i3R-yWrhU3w Equipment: - electric CNC universal tool milling machine - HEIDENHAIN TNC 124 path control (installed in 2007) * swiveling control panel, right front of the machine - electro-hydraulic tool changer - vertical milling head - ISO 40 with vertical work spindle * manual spindle feed .. 50.0 mm * scale ring for reading the quill adjustment - horizontal work spindle including counterholder - rapid traverse feed X-axis .. 0 - 4000 mm/min - rapid traverse feed Y-axis .. 0 - 2000 mm/min - rapid feed Z-axis .. 0 - 4000 mm/min - central lubrication, electric - pneumatic minimal spray device (lubrication system) - coolant device, including pump + collecting container - machine stand with foot - separate hydraulic system - original operating instructions + circuit diagram + acceptance report etc.

Lagernummer:
1008-9131211
x-travel:
500 mm
y-travel:
380 mm
z-travel:
350 mm
tool taper:
ISO 40
AMADA HFBO 100.30, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

AMADA

HFBO 100.30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** very good / well-maintained condition (!!) ** with only 17.575 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=BXxlx7s8sYY Equipment: - CNC electro-hydraulic press brake - CNC control AMADA OPERATEUR - CNC controlled 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) - swiveling control panel, front left - CNC-controlled back stop adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - upper tool holder with wedge camber - side protective device (swivelling doors) - rear protective device (swivelling door) - 1x 2-hand control / 1x foot switch - CE marking - original machine documentation

Lagernummer:
1008-9308412
pressure:
100 t
chamfer lenght:
3110 mm
distance between columns:
2700 mm
column arm:
400 mm
SIMAT SST 31/6.00, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

SIMAT

SST 31/6.00

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Equipment: - NC electro-hydraulic guillotine shears "swing cut" - NC electro-motorized back stop with digital position display - manual cutting gap adjustment, side - control unit + control cabinet, front left - 1x extra long side stop, including mm scale - 3x front support arms - front finger guard - side stand with projection .. 300 mm - 1x freely movable foot switch - EMERGENCY OFF button at the front - original operating instructions

Lagernummer:
1008-9325353
sheet width:
3100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
cutting angle:
1°30
ERMAK POWER BEND FALCON 26.100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 26.100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Current new price ~ 60.000 euros ** Special price on request ** from a maintenance workshop - good condition ** with only approx. 1.990 operating hours (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=t9gPmzchB6Y -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) * 2D graphical programming * 10.4" TFT color screen with high resolution * Bending sequence calculation * USB interface - Swiveling control panel, mounted on the left - CNC motorized backgauge with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes Y1 - Y2 - X - R - C (crowning) - CNC electric table crowning - divided deer foot upper tool Rolleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Divided universal die block Rolleri M 460 R, including die shoe - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical system - Safety device = light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - Operation manual machine + CNC controler

Lagernummer:
1008-9308335
pressure:
100 t
chamfer lenght:
2600 mm
distance between columns:
2200 mm
column arm:
410 mm
ZMM - SLIVEN HU 310, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** New price ~ 20.000 euros ** from a technical college (!!) - in checked condition - machine videos - https://www.youtube.com/watch?v=iqU7Bkh6INo https://www.youtube.com/watch?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Lagernummer:
1008-9207330
turning length:
750 mm
turning diameter:
310 mm
turning diameter over slide rest:
175 mm
spindle bore:
32.0 mm
BOSCHERT PB 2575, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BOSCHERT

PB 2575

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

- in checked condition - machine video - https://www.youtube.com/watch?v=0q0p4vC5IZU Equipment: - electro-hydraulic conventional NC press brake - swiveling operation at the front right, with ELGO P8822 control unit * digital position display * input of target/actual values ??possible - electro-motoric back stop - X axis * travel = 700 mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - upper tool holder with upper wedge camber - AMADA system * 1x split set of ROLLERI deer foot tool 85° - lower tool holder - AMADA system * 1x split set of ROLLERI 4-V dies (16/22/35/50 mm) - various other bending tools - rear protective device (door) - side protective device (door) - 1x freely movable double foot switch - Operating instructions (PDF)

Lagernummer:
1008-9308327
pressure:
75.0 t
chamfer lenght:
2620 mm
distance between columns:
2055 mm
column arm:
400 mm
AMADA GX II 630, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

AMADA

GX II 630

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** well-maintained condition (!!) ** current new price including accessories approx. 110.000 euros ** special price on request Equipment: - AMADA CNC touch control, front left ("GP 37W2") * machine control including information display * main display with 4x control panels * control / operation of all functions * max. 50x cutting programs with 15x sequences each - CNC electro-motoric back stop * travel speed .. 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the marking line * ??Shear cutting according to optical marking - 1x AMADA extra long side stop, with adjustable foot * Length approx. 3.500 mm - AMADA front support arms - manually adjustable table support plates, including ball rollers * Grip recesses in the front support table - Safety device behind the machine - 1x freely movable foot switch - original operating instructions ** Special accessories: - AMADA electro-motor conveyor belt - including sheet metal holding device for thin sheet metal cuts - including cuttings container

Lagernummer:
1008-9325318
sheet width:
3050 mm
plate thickness:
6.35 mm
thickness at "Niro-steel":
4.00 mm
:
8.00 mm
FALKEN PN 38/140, Metal Processing, Grinding machines, Belt Grinding Machine

FALKEN

PN 38/140

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Exhibition machine - like NEW ** not yet in use (!!) ** New price approx. 6.500 euros ** Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge

Lagernummer:
1008-8238998
width of the strips:
150 mm
band length:
2000 mm
band speed:
1400 / 2800 U/min
tube diameter:
40 - 140 mm
HESKA ESU 4, Metal Processing, Saws, Band Saw - Vertical

HESKA

ESU 4

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

** Machine from a maintenance workshop ** good condition with special accessories (!!) Furnishing: - Robust electro-motor vertical band saw machine - Frequency-controlled, infinitely variable saw blade drive * Infinitely adjustable via handwheel - Pole-changing drive motor - analog speed display - hydraulic, stepless table feed - Infinitely variable height adjustment of the belt guide, via hand wheel - electrical belt tension monitoring - IDEAL saw band welding machine model BSO, with shears & grinding motor - manually swiveling support table - Machine base - Cooling device - Emergency stop button

Lagernummer:
1008-9173331
roll diameter:
420 mm
throat:
400 mm
workpiece height:
285 mm
cutting speed:
15 - 1400 m/min
FALKEN ICM 2020 x 2.0, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FALKEN

ICM 2020 x 2.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display

Lagernummer:
1008-8355084
sheet width:
2020 mm
plate thickness:
2.0 mm
distance between columns:
2100 mm
angle adjustable from - to:
130 Grad
FALKEN PN 17/90, Metal Processing, Grinding machines, Belt Grinding Machine

FALKEN

PN 17/90

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Exhibition machine - like NEW ** not yet in use (!!) ** New price approx. 4.500 euros ** Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Lagernummer:
1008-8238999
tube diameter:
16.0 - 90.0 mm
width of the strips:
100 mm
band length:
1250 mm
grinding band dimension:
100 x 1250 mm
FALKEN IDK-2, Metal Processing, Sheet metal working / shaeres / bending, Circular Shear

FALKEN

IDK-2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Circular Shear

** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch * including emergency stop button

Lagernummer:
1008-8328163
cutting capacity:
2.0 mm
throat:
700 / 280 mm
round blank diameter max.:
1000 mm
round blank diameter min.:
120 mm
RAS 82.10, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

RAS

82.10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Completely overhauled - shear blades sharpened ** like NEW (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=8cb4EqRUxIs Equipment: - robust electro-motor-driven guillotine shears - manual back stop .. adjustment range 0-550 mm * with analogue measuring scale and magnifying glass * adjustable at the front, using the adjustment lever - 1x long side stop 850 mm, with adjustable stop - 1x freely movable foot switch - scratch protection on support table - rear sheet metal slide

Lagernummer:
1008-9325206
sheet width:
1040 mm
plate thickness:
2,50 mm
no. of strokes:
63 Hub/min
cutting angle:
1,66 °
FALKEN IR 1270 x 75, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

IR 1270 x 75

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Lagernummer:
1008-8405528
sheet width:
1250 mm
plate thickness:
1.5 mm
roll length:
1270 mm
roll diam. toproll:
75.0 mm
FALKEN IR 1550 x 75, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

IR 1550 x 75

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Lagernummer:
1008-8405501
sheet width:
1550 mm
plate thickness:
1.2 mm
roll length:
1270 mm
roll diam. toproll:
75.0 mm
FALKEN IR 1070 x 75, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

IR 1070 x 75

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Lagernummer:
1008-8405527
sheet width:
1050 mm
plate thickness:
2.0 mm
roll length:
1070 mm
roll diam. toproll:
75.0 mm
OSTAS KMRP-2.5, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

OSTAS

KMRP-2.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

** Demonstration machine - very good conditions ** Approx. new price 4.000 euros ** Special price on request Equipment: - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and anti-clockwise rotation - 3x pairs of beading and flanging rollers included in delivery

Lagernummer:
1008-9475042
plate thickness:
2.5 mm
throat:
260 mm
bending speed:
5.0 m/min
roll diameter:
98.0 mm
A+B FASTECH MAX 40, Metal Processing, Sheet metal working / shaeres / bending, Reinforced Steel - Bending Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Reinforced Steel - Bending Machine

** Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: https://www.youtube.com/watch?v=zagTSA81VyA

Lagernummer:
1008-8389015
bending diam. - max.:
36.0 mm ST
cutting thickness max.:
36.0 mm ST
motor:
1450 U/min
oil volume:
32.0 l
ERMAK CNC HAP 3100x200, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

CNC HAP 3100x200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** current new price approx. 80.000 euros ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=H4O044HEfRQ Furnishing: - electro-hydraulic CNC press brake - CYBELEC CNC control model DNC 60 HP * swiveling operation, front left * numerical control * Tool and product library - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back gauge (X axis) * with 2x manually adjustable stop fingers (R+Z axis) * Travel X = 800 mm - manual table cambering, adjustment via handwheel * with analogue value display - Upper tool holder with wedge crowning (AMADA) - 1x set of split upper tools - 1x MULTI V reversible die block - SICK light barrier in front of the machine (safety device) - Light barrier behind the machine (safety device) - side protection device (pivoting doors) - 2x front support arms "sliding system", with T-slot and tilting cam - 1x freely movable double foot control - User manual (PDF)

Lagernummer:
1008-9308378
pressure:
200 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
400 mm
GEKA PUMA 55/E-500, Metal Processing, Stamping press, Punching Press

GEKA

PUMA 55/E-500

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** good / well-maintained condition (!!) ** current new price approx. 12.000 euros ** special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Lagernummer:
1008-9412180
pressure:
55.0 t
punching cross-cut in cmm:
40 in 10 mm
punching cross-cut in cmm:
20 in 20 mm
punching cross-cut in cmm:
27 in 13 mm
GEKA PUMA 70/E-500, Metal Processing, Stamping press, Punching Press

GEKA

PUMA 70/E-500

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** good / well-maintained condition (!!) ** New price approx. 21.000 euros ** Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Lagernummer:
1008-9412184
pressure:
70.0 t
punching cross-cut in cmm:
27 in 20 mm
punching cross-cut in cmm:
32 in 14 mm
work height max.:
1060 mm
KAMI RKM 5016, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

KAMI

RKM 5016

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

** current new price approx. 20.000 euros ** machine has rarely been used (!!) ** special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=BctgQK3tMHE Description / equipment: - guideways hardened and ground - motorized height adjustment - hydraulically switched feed and spindle gear - hydraulic and mechanical clamps - hardened and ground gears - ground base plate - thick-walled, ground column - height adjustment of the boom arm with lifting motor - boom arm and drill head with hydraulic clamping - hardened and ground gears running in an oil bath - guideways on the boom hardened and ground - automatic spindle feed - 1x cube table 630 x 500 x 500 mm

Lagernummer:
1008-9111006
bore capacity in steel (diameter):
50.0 mm
arm length:
350 - 1600 mm
turning speeds:
25 -2000 U/min
spindle taper MT:
5 MK
GEKA HYDRACROP 50 S, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

GEKA

HYDRACROP 50 S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** current new price approx. 19.000 euros ** special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations * flat steel shears * profile steel shears * hole punch * notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches - operating instructions (PDF)

Lagernummer:
1008-9412185
puncher:
50.0 t
square edge steel:
40.0 x 40.0 mm
round bar steel:
40.0 mm
L-beam:
120 x 120 x 10 mm
EHT MULTICUT 10-30, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

EHT

MULTICUT 10-30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292

Lagernummer:
1008-9325292
sheet width:
3050 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
cutting angle adjustment:
0,5 - 2,5 °
THOMAS - Vollautomat SUPER TRAD 350 AO CN, Metal Processing, Saws, Band Saw

THOMAS - Vollautomat

SUPER TRAD 350 AO CN

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG)

Lagernummer:
1008-9173369
cutting diameter:
270 mm
saw band length:
2925 x 27 x 0.9 mm
capacity 90 degrees: flat:
350 x 240 mm
capacity 45 degrees: round:
230 mm
AK BEND SRH-1000, Metal Processing, Welding machines, Rotary Welding Table

AK BEND

SRH-1000

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

** Exhibition machine from 2024 ** with only approx. 2x operating hours ** Condition NEW!! ** Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): https://www.youtube.com/watch?v=Vayw8Ny64nc

Lagernummer:
1008-8531721
weight max. in kg:
max. 1000 kg
turning speeds:
0,18 - 0,58 U/min
height:
976 - 1436 mm
inclination:
0 - 115 °
DURMA / METALLKRAFT HTBS-T 3100-60, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

DURMA / METALLKRAFT

HTBS-T 3100-60

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** well-maintained / like new condition (!!) ** New price ~ 45.000 euros ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=ee8AVO6tkcE Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325340

Lagernummer:
1008-9325340
sheet width:
3100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
no. of strokes:
15 Hub/min
AK BEND APK 81, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 81

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** Exhibition machine from 2021 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x hydraulically adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Lagernummer:
1008-840421
I-beam section - upend:
100 x 20 (d 2100) mm
bar material dia. max.:
100 x 3 (d 3000) mm
L-beam:
80x80x8 (d 2000) mm
square material:
50 x 25 x 2 (d 600) mm
TUGRA TT 90, Metal Processing, Grinding machines, Belt Grinding Machine

TUGRA

TT 90

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

The TUGRA TT 90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - easy manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Lagernummer:
1008-823858
tube diameter:
16.0 - 90.0 mm
width of the strips:
100 mm
band length:
1250 mm
grinding band dimension:
100 x 1250 mm
AK BEND AKM 400 HYDR, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 400 HYDR

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

** Exhibition machine from 2022 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Lagernummer:
1008-8470420
plate thickness:
4.0 mm
throat:
260 mm
distance between roll centers:
132 mm
stroke:
55.0 OW mm
THOMAS - Halbautomat S.TRAD 301 SO DIGIT, Metal Processing, Saws, Band Saw

THOMAS - Halbautomat

S.TRAD 301 SO DIGIT

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Equipment: - electro-hydraulic metal band saw - SEMI-AUTOMATIC - electro-hydraulic material clamping - with miter device 45° right / 60° left - microprocessor control for controlling all functions - continuously adjustable lowering of the saw bow - handwheel for manual saw band tensioning - coolant device - 1x freely movable foot switch - EMERGENCY STOP button at the front - operating instructions (ENG) Functioning of semi-automatic operation: - clamping the vice - hydraulic lowering of the saw bow - lifting the saw bow - opening the vice

Lagernummer:
1008-9173370
cutting diameter:
255 mm
saw band length:
2750 x 27 x 0.9 mm
capacity 90 degrees: flat:
300 x 200 mm
capacity 45 degrees: round:
160 mm
SCHROEDER MHSU 1500/3.5, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHROEDER

MHSU 1500/3.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Machine from a maintenance workshop ** Current new price including accessories approx. 25.000 euros ** Special price on request Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - electro-motorized back stop, with analog position display * adjustable from the front * stepless adjustment over the entire travel range - 1x hold-down bar - 1x freely movable foot switch - front, extendable table extension - rear safety device - operating instructions (PDF)

Lagernummer:
1008-9325392
sheet width:
1530 mm
plate thickness:
3.5 mm
thickness at "Niro-steel":
2.0 mm
no. of strokes:
max. 34 Hub/min
SAHINLER PK-35 F, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

SAHINLER

PK-35 F

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** current new price including accessories approx. 4.500 euros ** special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual feed of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - 2x set of pipe rollers - operating instructions (PDF)

Lagernummer:
1008-9401278
I - beam section - flat steel:
120 x 15 (d 750) mm
I-beam section - upend:
60 x 10 (d 800) mm
L-beam:
50 x 5 (d 1200) mm
round material:
35,0 (d 800) mm
HM MLS 20/20, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

HM

MLS 20/20

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Machine from a maintenance workshop ** good condition (!!) Equipment: - robust electro-mechanical sheet metal shears - heavy / robust drive motor - manual back stop, including analog position display * Adjustment range max. 640 mm * Adjustment at the back via handwheel - 1x table side stop - 2x front support arms - 1x freely movable foot switch - Control cabinet - left - rear safety device (grid housing) ** Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts

Lagernummer:
1008-9325382
sheet width:
2025 mm
plate thickness:
2.0 mm
thickness at "Niro-steel":
1.0 mm
blade length:
2110 mm
SAYMAC IES 100, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SAYMAC

IES 100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Machine from a maintenance workshop ** good condition (!!) Equipment: - robust electro-mechanical sheet metal shears - heavy / robust drive motor - manual back stop, including analog position display * Adjustment range max. 735 mm * Adjustment from the front using a handwheel - 1x table side stop - 2x front support arms - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating unit - front left - rear safety device (grid enclosure) ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts

Lagernummer:
1008-9325381
sheet width:
2100 mm
plate thickness:
3.0 mm
thickness at "Niro-steel":
1.5 mm
blade length:
2110 mm
TRUMPF TRUMABEND V85, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND V85

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** with increased installation height / piston stroke ** very well maintained condition (!!) ** with only approx. 28.500 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. ** further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Lagernummer:
1008-9308401
pressure:
85.0 t
chamfer lenght:
2050 mm
distance between columns:
1750 mm
column arm:
410 mm
COMACA VAR 250/6, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

COMACA

VAR 250/6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

- in checked condition - machine video - https://www.youtube.com/watch?v=p0EZ793UhF4 Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - 2x speeds - Inching mode for adjusting the shear blades - 2x adjustable stop rulers - Machined work table, with T-slots - free-moving footswitch - Operation manual

Lagernummer:
1008-9397086
plate thickness:
6.0 mm ST
plate thickness:
4.0 mm VA
table-size:
1200 x 900 mm
blade length:
250 x 250 mm
HM NWKS 2000/3, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

HM

NWKS 2000/3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Machine from a maintenance workshop ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=GdSAI4D52Wg Equipment: - robust electro-mechanical sheet metal shears - machine body in closed design as all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motoric back stop, including digital control unit * Adjustment range max. 800 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - ball rollers in the support table - 1x freely movable foot switch, including emergency stop button - front finger guard - original operating instructions

Lagernummer:
1008-9325336
sheet width:
2100 mm
plate thickness:
3.0 mm
thickness at "Niro-steel":
1.5 mm
blade length:
2110 mm
BAYKAL APH 2604x60, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APH 2604x60

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good / well-maintained condition (!!) ** with only approx. 2,370 operating hours ** current new price approx. 60,000 euros ** special price on request Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Lagernummer:
1008-9308435
pressure:
60.0 t
chamfer lenght:
2600 mm
distance between columns:
2050 mm
column arm:
310 mm
KINGSLAND COMPACT 45 HYDRAULIC, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

KINGSLAND

COMPACT 45 HYDRAULIC

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** from a maintenance workshop ** New price ~ 13.000 euros ** Special price on request Furnishing: - electro-hydraulic profile steel shear - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - side support tables - 1x manually adjustable contact length stop - 1x freely movable foot switch - Central lubrication * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412169

Lagernummer:
1008-9412169
punching pressure:
45.0 t
punch diameter:
22 in 15.0 mm
punch diameter:
38 in 8.0 mm
round bar steel:
30.0 mm
SCHROEDER AK 2000/1.0, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

SCHROEDER

AK 2000/1.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** good condition - including special accessories (!!) ** New price approx. 11.000 euros ** Special price on request The AK hand-held swivel bending machine is a classic workshop machine. The technically perfect and sophisticated design gives the machine flexibility and profitability and thanks to its maintenance- and wear-free guides and machine elements, the AK is almost indestructible in daily use. Equipment: - manual swivel bending machine including pneumatic bending aid - foot lever device for operating & clamping the upper beam - 22.5° sheet metal worker rail - directly screwed on - 2x bending rails (10.0 and 25.0 mm one-piece) - adjustable angle stop - including degree display + fixed stop * Special equipment included: - manual rear stop including rear sheet support table * Adjustment range up to max. 750 mm * Adjustment via handwheel from behind - pneumatic bending aid (for easy bending of sheet metal) - 1x additional upper tool rail

Lagernummer:
1008-9355208
sheet width:
2020 mm
plate thickness:
1.0 mm
bending angle max.:
150 °
stroke of upper beam:
110 mm
ERMAK HGS 3100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

HGS 3100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** well-maintained condition (!!) Equipment: - NC electro-hydraulic swing beam shear - including ELGO NC control unit, front left - Functions of the NC control: * Back stop preselection - X axis * Quantity - NC electro-motorized back stop * Travel = 5.0 - 1.000 mm (X axis) * on ball screws * Positioning accuracy 0.1 mm * Travel speed 80.0 mm/sec. - manual - lateral cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - ball rollers in the front support table - hinged finger guard, with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - rear sheet metal slides - 1x freely movable foot switch - 2x EMERGENCY OFF buttons at the front - operating instructions + circuit diagram + hydraulic diagram

Lagernummer:
1008-9325367
sheet width:
3100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
down holder:
14 Stück
EMCO MAT-17D, Metal Processing, Lathes, lathe-conventional-electronic

EMCO

MAT-17D

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Machine from a vocational school (NL) ** very well-maintained condition (!!) Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 200 mm - RÖHM 4-jaw chuck Ø 250 mm - foldable lathe chuck protection - Steel holder with 2x inserts - fixed bezel - movable tailstock, with rotating center point - removable chip tray - Chip protection back wall - Coolant device - Bed stop - EMERGENCY stop button (on digital display) - rigid lead and pull spindle cover - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207353

Lagernummer:
1008-9207353
turning length:
700 mm
turning diameter over bed:
340 mm
turning diameter over slide rest:
190 mm
number of spindle speeds:
35 - 3000 U/min.
GILLARDON GB 50 V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

GILLARDON

GB 50 V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Equipment: - robust & stable machine construction - stepless speed adjustment - pole-switchable drive motor - electromagnetic automatic spindle feed - one-hand feed engagement - adjustable drilling depth stop, with fine adjustment - work table height adjustable, using a hand crank - machined base plate, including coolant device - foot switch for function: spindle off - original operating instructions

Lagernummer:
1008-9103771
Boring power:
50.0 mm
bore capacity in cast iron:
60.0 mm
morse taper:
4 Kurzspindel MK
spindle stroke:
225 mm
RSA RASAMAX DUO, Other Metal Processing, Other machines, Deburring Machine

RSA

RASAMAX DUO

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Deburring Machine

- in checked condition - machine video - https://www.youtube.com/watch?v=3IjRrzZWL00 Description : RASAMAX DUO was specially developed for the fast and reliable developed for deburring straight sheet metal. The deburring machine has two counter-rotating deburring brushes that two offset levels. With this principle, upper and Lower edge of sheet metal deburred simultaneously in one operation. This means up to 50% time savings compared to other methods! RASAMAX DUO is suitable for deburring individual pieces and small series and designed with its robust construction for continuous use. Furnishing: - efficient deburring of straight sheets - for steel, stainless steel, non-ferrous metals

Lagernummer:
1008-9238970
plate thickness:
5,0 mm
turning speed range:
1500 / 3000 U/min
diameter of brush:
250 mm
width of brush:
80 mm
METALLKRAFT HPS 55-110, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

METALLKRAFT

HPS 55-110

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** from a maintenance workshop ** New price of basic machine ~ 15.000 euros ** Special price on request Equipment: - electro-hydraulic profile steel shears - punching station, flat steel shears, angle/profile steel . shears, notching station - heavy and stable welded construction - infinitely variable adjustment of the stroke - very compact design - support table at notching and hole station - side support tables - 1x manually adjustable electrical contact length stop - various punches + dies - 2x freely movable foot switches - EMERGENCY OFF button - Operating instructions (PDF) * Punching tools included in delivery: - Round Ø: 8/10/12/14/18 mm with dies - LL: 10.5x25/12x25/14x25 mm with dies - Incl. reducers / holders

Lagernummer:
1008-9412190
punching pressure:
55.0 t
punch diameter:
20 in 20 mm
punch diameter:
40 in 10 mm
adjustment of stroke:
0 - 60.0 mm
EMCO MAT-17D, Metal Processing, Lathes, lathe-conventional-electronic

EMCO

MAT-17D

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Machine from a vocational school (NL) ** very well-maintained condition (!!) Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 200 mm - RÖHM 4-jaw chuck Ø 250 mm - foldable lathe chuck protection - Steel holder with 2x inserts - fixed bezel - movable tailstock, with rotating center point - removable chip tray - Chip protection back wall - Coolant device - Bed stop - EMERGENCY stop button (on digital display) - rigid lead and pull spindle cover - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207354

Lagernummer:
1008-9207354
turning length:
700 mm
turning diameter over bed:
340 mm
turning diameter over slide rest:
190 mm
number of spindle speeds:
35 - 3000 U/min.
VDF OERLIKON BOEHRINGER DUE 500 / 1450, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** good / well-maintained condition (!!) ADVANTAGES of the DUE model series: - stable horizontal box bed - maximum cutting performance and highest precision - large chip chutes - ergonomic concept for work - universal lathe "MADE IN GERMANY" Equipment: - robust lead/spindle lathe - RÖHM 3-jaw chuck Ø 250 mm, including replacement jaws - MULTIFIX steel holder with 3x inserts - foldable jaw chuck guard - longitudinal feed, with rapid traverse - face feed, with rapid traverse - speed and feed settings can be precisely switched - key for jaw chuck - strong / robust main/drive motor - bed stop + bed slide can be firmly clamped - movable tailstock with fine scaling * including moving center - chip back wall - operating instructions (PDF)

Lagernummer:
1008-9207366
turning length:
1450 mm
turning diameter over bed:
500 mm
turning diameter over slide rest:
285 mm
bed width:
360 mm
BAYKAL HGL 2600/6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

BAYKAL

HGL 2600/6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions * Machinelink: https://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9325326

Lagernummer:
1008-9325326
sheet width:
2560 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
distance between columns:
2600 mm
WEILER PRAKTIKANT 800 R, Metal Processing, Lathes, lathe-conventional-electronic

WEILER

PRAKTIKANT 800 R

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Lagernummer:
1008-9207367
turning length:
800 mm
turning diameter:
280 mm
turning diameter over slide rest:
150 mm
spindle bore:
42.0 mm
MUHR & BENDER KLH 300/610, Metal Processing, Stamping press, Punching Press

MUHR & BENDER

KLH 300/610

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** good condition (!!) ** with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Lagernummer:
1008-9412188
pressure:
30.0 t
punching cross-cut in cmm:
30.0 in 9.0 mm
stroke:
ca. 35 Hub/min
throat:
610 mm
ROLLMAK SME 140-20/4.5, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

ROLLMAK

SME 140-20/4.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine - unused (!) ** Special price on request ** List manufacturer price: 21.400 euros ** Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds

Lagernummer:
1008-8405573
sheet width:
2050 mm
plate thickness:
4,5 mm max.
plate thickness:
4,0 mm anbiegen
roll length:
2050 mm
FASTI 205-10-2, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FASTI

205-10-2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** good / well-maintained condition (!!) Equipment: - robust, manual swivel bending machine - manual lifting via hand lever (including gas pressure damper) - manual adjustment of the upper beam via side handwheel - manual lower beam adjustment - bending angle fixed stop, with analog angle display - manual rear stop, adjustment from behind (handwheel) - upper beam with large opening width .. 265 mm - movable on rollers, including forklift pockets (homemade)

Lagernummer:
1008-9355220
sheet width:
1020 mm
plate thickness:
2.00 mm ST
plate thickness:
3.00 mm ALU
thickness at "Niro-steel":
1.00 mm
DURMA AD-R 30.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DURMA

AD-R 30.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good condition (!!) ** current new price approx. 80.000 euros ** special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=dyv7iQXcRt4 Equipment: - electro-hydraulic CNC press brake - two synchronized cylinders with "HIGH PERFORMANCE" hydraulic components - with CYBELEC CNC control - "DNC 880S" * 2D graphic display for display and multiple simulation * graphic 2D programming * easy handling * automatic bending sequence calculation and collision detection * large product and tool library * automatic tonnage calculation (pressure) - swiveling operation, front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - upper beam with solid, self-lubricating four-way guide - CNC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers * Adjustment range up to max. 650 mm - CNC electro-motor height adjustment of the rear stop (R axis) * Adjustment range up to max. 250 mm - CNC electro-motor table cambering - AMADA/RAPID pneumatic upper tool clamp - AMADA lower tool holder, including die shoe - FIESSLER LASER safety device at the front - 2x front, movable support arms ("Sliding" system) - side safety device (swinging doors) - rear safety device (swinging door) - 1x freely movable foot switch - large hydraulic oil tank to keep the operating temperature low - original operating instructions

Lagernummer:
1008-9308418
pressure:
135 t
chamfer lenght:
3050 mm
distance between columns:
2600 mm
column arm:
410 mm
RAS 52.7, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

RAS

52.7

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display * adjustable from behind * continuous adjustment over the entire travel range * travel range max. 550 mm - 1x hold-down bar - 1x side stop - 1x front support arm - original operating instructions

Lagernummer:
1008-9325393
sheet width:
1040 mm
plate thickness:
2.50 mm
thickness at "Niro-steel":
1.25 mm
no. of strokes:
max. 90 Hub/min
KASTO PSB 280 U, Metal Processing, Saws, Hacksaw

KASTO

PSB 280 U

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Hacksaw

Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Lagernummer:
1008-9182028
cutting diameter:
280 mm
band length:
450 mm
capacity 90 degrees: square:
240 x 240 mm
capacity 90 degrees: flat:
280 x 160 mm
FEIN 90801049000, Woodworking, Handling, Lifting equipment

FEIN

90801049000

Kategorie 1:
Woodworking
Kategorie 2:
Handling
Kategorie 3:
Lifting equipment

Description : - Safe hanging of device and supply line - in the weightless "state." - constant traction - Tear-proof steel cable

Lagernummer:
1008-9531079
Lifting height:
2000 mm
weight max.:
22 - 32 kg.
weight:
13,5 kg
AK BEND APK 50, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** Exhibition machine from 2022 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Lagernummer:
1008-8404204
I - beam section - flat steel:
80 x 16 (d 1200) mm
I-beam section - upend:
50 x 15 (d 1000) mm
L-beam:
50 x 5 (d 1200) mm
round material:
40.0 (d 800) mm
LINDE P 30, Other Machines, Other attachments, Trailer

LINDE

P 30

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Trailer

Lagernummer:
1008-956364
weight max.:
3000 kg
speed:
max. 10.0 km/h
Number of working hours:
12.165 h
weight of the machine ca.:
ca. 1000 kg
SCHROEDER MPB 3200/2.0, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

SCHROEDER

MPB 3200/2.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** very good condition - including special accessories (!!) ** approx. new price 100.000 euros ** special price on request An all-rounder for thin sheet metal processing. Its hallmark: easy and quick to use. High production output and versatile equipment. Equipment: - electro-motorized universal swivel bending machine * ??for individual and series production - rotating upper beam = automatic tool change system * reduces set-up and idle times - including SCHRÖDER CNC control model POS 2000 * with touchscreen control panel * color display * automatic cutting calculation * material and tool library * dimensionally accurate bending simulation - servo-converter-controlled drives * for bending/upper beam & electro-motorized back stop - CNC motorized lower beam adjustment - CNC electro-motorized movable back stop * with rear sheet support surface, including recirculating ball screws * recirculating ball screws (+/-0.1 mm) - 2x bending/upper tool tool stations: * Station 1: 1x pointed/tinsmith rail * Station 2: 1x split goat's foot tool - 1x freely movable Double foot switch - Machine alignment plates - Operating instructions (PDF)

Lagernummer:
1008-9355206
sheet width:
3220 mm
plate thickness:
2.0 mm
daylight opening:
160 mm
adjustment:
80.0 mm
V-TRADE BMT 250 V, Metal Processing, Saws, Band Saw

V-TRADE

BMT 250 V

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** very rarely used (!!) Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173350

Lagernummer:
1008-9173350
cutting diameter:
250 mm
capacity 90 degrees: flat:
250 x 450 mm
capacity 45 degrees: round:
190 mm
capacity 45 degrees: square:
250 x 190 mm
LINDE P 30, Other Machines, Other attachments, Trailer

LINDE

P 30

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Trailer

** Tugs were used by BOSCH (DE)!! ** Battery was “boosted” in 04/2024 Maneuver and transport agilely and safely in narrow aisles The P30 electric tractor and platform truck from Linde Material Handling is suitable for flexible and safe transport processes on small and medium-sized businesses Distances – even and especially when there is little space available. The Vehicle has precise and self-centering power steering that the driver safely controlled with an ergonomic two-handed handle. Also relieved The compact design of the P30 allows you to maneuver in narrow aisles. The powerful three-phase motor accelerates quickly to the maximum Speed. Ensure a comfortable and secure stand while driving the adjustable backrest and the fully suspended standing platform non-slip floor covering. The maximum towing capacity of the P30 is three tonnes. It reaches a top speed of 10 kilometers per hour. Furnishing : - 4 millimeter thick steel chassis - Two-grip handlebar design - LINDE battery charger * Machine link:

Lagernummer:
1008-956363
weight max.:
3000 kg
speed:
max. 10.0 km/h
Number of working hours:
10.015 h
weight of the machine ca.:
ca. 1000 kg
HUVEMA - Halbautomat HU 230 DGH, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User manual in German

Lagernummer:
1008-9173318
cutting diameter:
230 mm
capacity 90 degrees: flat:
320 x 130 mm
capacity 90 degrees: square:
230 x 230 mm
capacity 45 degrees: flat:
230 x 140 mm
V-TRADE ZX 3840, Metal Processing, Boring mills / Machining Centers / Drilling machines, Rapid Radial Drilling Machine

V-TRADE

ZX 3840

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Rapid Radial Drilling Machine

** well-maintained condition (!!) ** New price approx. 20.000 euros ** Special price on request Equipment: - electro-hydraulic robust high-speed radial drilling machine - stable construction guarantees vibration-free work - compact design with electro-hydraulic quick clamp - stepless speed adjustment (50-316 + 316-2000 rpm) - digital speed display - electro-motor height adjustment of the drill head - drill head can be swiveled 180° - boom can be moved forwards and backwards and swiveled horizontally - R/L running of the work spindle - manual & automatic spindle feed - large work table with 3x T-slots - thread cutting device - coolant device in the machine base - EMERGENCY OFF button at the front - adjustable machine light (230V) - T-slots = can be clamped on the side + back of the machine - machine swing feet - original operating instructions

Lagernummer:
1008-9111004
bore capacity in steel (diameter):
40.0 mm
bore capacity in cast iron:
50.0 mm
thread:
M 30 St 60
thread:
M 40 GG 22
FASTI / HOAN CHE 25/4, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

FASTI / HOAN

CHE 25/4

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** Machine from training workshop ** good / well-maintained condition (!!) Equipment: - robust electro-hydraulic "swing cut" guillotine shears - electro-motorized rear stop - electric cutting length limiter - electro-motorized cutting gap adjustment - front support table including recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable, front support arms - 1x freely movable foot switch - front finger guard - EMERGENCY STOP button at the front - operating instructions * Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts

Lagernummer:
1008-9325391
sheet width - max.:
2535 mm
plate thickness:
4.0 mm ST
plate thickness:
2.5 mm VA
plate thickness:
6.0 mm ALU
KLAEGER BR 71, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

KLAEGER

BR 71

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear storage - horizontal and vertical use possible - 1x freely movable foot switch - segmented standard rollers (divided) - various pipe rollers - manual adjustment of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - base frame with forklift pockets for easy transport

Lagernummer:
1008-9401288
I - beam section - flat steel:
120 x 20 (d 750) mm
I-beam section - upend:
60 x 10 (d800) mm
L-beam:
50 x 5 (d 1200) mm
bar material - diameter:
35.0 (d 800) mm
FASTI 416-3-63-1.5, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

FASTI

416-3-63-1.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

** well-maintained / good condition (!!) Equipment: - heavy / robust beading machine - with lots of beading / flanging rollers - rollers made of turned & hardened steel - electric motor drive - internal gear brake motor - manual feed of the top roller using a handwheel - stepless speed adjustment - 1x adjustable stop plate - 1x freely movable double foot switch (R/L running) - original operating instructions

Lagernummer:
1008-9475041
plate thickness:
1.50 mm
throat:
250 mm
work speed:
8.0 - 40.0 m/min
roll diameter:
63.0 mm
MACMOM / INAS M 343 B CNC, Metal Processing, Milling machines, Universal Milling Machine

MACMOM / INAS

M 343 B CNC

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** Original price incl. special accessories ~ 72.000 euros ** Machine was very rarely used (!!) ** with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine ** Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : https://www.youtube.com/watch?v=3dqLbTme81E

Lagernummer:
1008-9131202
x-travel:
400 mm
y-travel:
250 mm
z-travel:
400 mm
tool taper:
ISO 40
BOSCHERT PROFI 28 (SONDER), Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BOSCHERT

PROFI 28 (SONDER)

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** very good / well-maintained condition (!!) ** with lots of bending tools Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Lagernummer:
1008-9308432
pressure:
28.0 t
chamfer lenght:
1000 mm
distance between columns:
890 mm
throat:
200 mm
SOLID R10, Metal Processing, Boring mills / Machining Centers / Drilling machines, Gang Drilling Machine

SOLID

R10

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Gang Drilling Machine

- in checked condition - machine video - https://www.youtube.com/watch?v=n0EUi8w4KaU Furnishing: - V-belt driven bench drill/line drill - with 5x stations - Machined work table, with T-slots - manual spindle feed - Height-adjustable drilling head - Machine base

Lagernummer:
1008-9093629
bore capacity in steel (diameter):
10.0 / 13.0 mm
throat:
150 mm
bore stroke:
60,0 mm
spindle taper:
B 16
OSTAS OPK 45, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

OSTAS

OPK 45

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** Demonstration machine with 1x operating hour ** Condition as new ** Current new price approx. 8.000 euros ** Special price on request Equipment: - robust electro-motorized ring/profile bending machine - Machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - right/left running of the drive rollers - electro-hydraulic delivery of the top roller - digital position display of the top roller - manually adjustable side/straightening rollers - operating instructions (ENG)

Lagernummer:
1008-9401279
I - beam section - flat steel:
80 x 10 (d 400) mm
I-beam section - upend:
60 x 10 (d 750) mm
L-beam:
50 x 5 (d 1100) mm
round material:
30.0 (d 700) mm
EUROMAC MULTI 220/6 R, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

EUROMAC

MULTI 220/6 R

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

** current new price approx. 25.000 euros ** good condition (!!) ** special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA

Lagernummer:
1008-9397097
plate thickness:
6.5 mm
thickness at "Niro-steel":
5.0 mm
angle adjustable from - to:
30 - 140 Grad
no. of strokes:
ca. 50 Hub/min
HSP 335 x 7,5, Metal Processing, Presses, Hand-Operated Fly Press

HSP

335 x 7,5

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Hand-Operated Fly Press

Furnishing: - 2-column arbor press - large hand wheel - mechanical spindle locking in front - various tools - machine base

Lagernummer:
1008-9377035
pressure:
7,5 t
distance between columns:
335 mm
dayligth:
400 mm
table hole:
75 mm
PEDDINGHAUS Peddimax 801, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

PEDDINGHAUS

Peddimax 801

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Lagernummer:
1008-9412158
pressure:
80,0 t
punching cross-cut in cmm:
31,0 in 25 mm
shear: flat material:
500x18 / 300x22 mm
L-beam:
150 x 12 mm
KALTENBACH TL 400, Metal Processing, Saws, Aluminium Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Furnishing: - Precise and accident-free work thanks to cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping

Lagernummer:
1008-9164051
saw blade diameter:
400 mm
cutting diameter:
130 mm
capacity 90 degrees: flat:
220 x 90 mm
turning speeds:
3200 U/min
BAYKAL APHS 31.300, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APHS 31.300

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** current new price ~ 150.000 euros ** Machine in a well-maintained condition (!!) ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=Ea8ta6UG38s -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * and increased bending beam speeds -------------------------------------------------- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA 66T" (touch screen) * 2D graphic touch screen programming mode * 17" high-resolution color TFT * Complete Windows application suite * Delem Modusys compatibility (module scalability and adaptivity) * USB, peripheral connection * swiveling control unit, front left - CNC controlled axes: Y1 - Y2 - X - R - Z1/Z2 - C (crowning) + AP1 - CNC electro-motorized rear stop (X axis) - CNC electro-motorized height adjustment of the stop beam (R axis) - CNC electro-motorized adjustment of the stop fingers (Z1+Z2 axis) - 1x CNC electro-motorized bending aid at the front (AP1) - CNC electro-motorized crowning (C) * including "parking" area for bending aid - WILA/TRUMPF electro-hydraulic tool clamping TOP - WILA/TRUMPF electro-hydraulic tool clamping BOTTOM - Safety device behind the machine - FIESSLER AKAS laser protective device in front of the machine - 1x front support arm "sliding system", with T-slot and tilting cam - 1x additional front support arm (not mounted) - 1x freely movable double foot control - CE marking - Control cabinet, left side - Operating instructions (PDF)

Lagernummer:
1008-9308242
pressure:
300 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
500 mm
HACO PPES 40.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPES 40.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable * manual windage (Z axis) * manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German

Lagernummer:
1008-9301136
pressure:
135 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
stroke:
130 mm
OSTERBERGER SBT 10-3200/NC, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

OSTERBERGER

SBT 10-3200/NC

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** well-maintained condition (!!) ** current new price approx. 35.000 euros ** special price on request Equipment: - NC electro-hydraulic swing beam shear - including ESTUN NC control unit "E20", front left - NC electro-motorized back stop * on ball screws * positioning accuracy 0.1 mm * travel speed 80.0 mm/sec. - manual / lateral cutting gap adjustment (eccentric) - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - front light barrier (finger protection) - rear sheet metal slide - 1x freely movable foot switch - 2x EMERGENCY OFF buttons at the front

Lagernummer:
1008-9325378
sheet width:
3200 mm
plate thickness:
10.0 mm
thickness at "Niro-steel":
5.0 mm
down holder:
14 Stück
MAHO MH 400, Metal Processing, Milling machines, Universal Milling Machine

MAHO

MH 400

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a training workshop ** good / well-maintained condition (!!) Equipment: - electro-motor universal milling machine - HEIDENHAIN digital display "VRZ 6502 including control console * swiveling, front right * display font 0.005/0.001 mm - electro-motor adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * manual adjustment via handwheel also possible - stepless speed adjustment - vertical milling head with quill adjustment * tool holder ISO 40 * automatic tool clamping with clamping/drawbar * swiveling milling spindle guard - robust work table including T-slots .. 650 x 360 mm * number/size of T-slots 6 pieces 14H7 * distance between T-slots 63.0 mm * safety housing (self-made) - coolant system including lower Chip tray - horizontal work spindle for horizontal use * spindle bearing with lifetime lubrication (maintenance-free) - halogen/machine lighting - central lubrication including container - original operating instructions

Lagernummer:
1008-9131215
x-travel:
400 mm
y-travel:
375 mm
z-travel:
350 mm
turning speeds:
63 - 4000 U/min
BOSCHERT K30-120 MINI S, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BOSCHERT

K30-120 MINI S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Lagernummer:
1008-9397083
:
4.0 mm
:
3.0 mm
:
30 - 120 Grad
blade length:
150 x 150 mm
CMA RAPID DRILL TRD-32 CN 6000, Metal Processing, Boring mills / Machining Centers / Drilling machines, Jig Boring Machine

CMA

RAPID DRILL TRD-32 CN 6000

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Jig Boring Machine

Furnishing : - Welded monoblock steel frame with high rigidity - Modular table made of cast iron with four T18 grooves - 8.4" color touchscreen CNC control - The machine moves via linear guides along all axes - is driven by servo motors (programmable). - Spindle rotation driven by servo motor (programmable) - Spindle BT40 with automatic clamping - External coolant system: pump and tank - automatic tool calibrator CNC OMRON color touch screen control: - Memory up to 999 programs - Programming of coordinates via 3 different menus: * Single hole (random pattern) * Hole grid (single or multi-line) * Flange * 50 programmable zero points - CNC control of all axes (X,Y,Z) - Axis (Z): * Different speeds & workflows programmable * Plate drilling cycle * Drilling cycle for profiles * Thermal drilling cycle * small milling cycle (linear and interpolated X/Y) - Programming ISO standard * Special accessories included: - 4x NEW CMA pneumatic vice * for clamping small, narrow parts as well as large, long parts. * Quick adjustment for the wingspan * Jaw width .. 100 mm * Clamping range (span)..590/600 mm * Support height base/step jaw .. 38/124 mm * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-912404

Lagernummer:
1008-912404
x-travel:
6.000 mm
y-travel:
650 mm
z-travel:
400 mm
spindle diameter:
MAS-403-BT40
FLOTT TB 6 S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

FLOTT

TB 6 S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** from a vocational training center (!!) Furnishing: - manual spindle feed - Analogue drilling depth display with mm scale - pole-changing motor - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - Connection cable + 16A plug - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093645

Lagernummer:
1008-9093645
bore capacity in steel (diameter):
6.0 / 10.0 mm
throat:
200 mm
bore stroke:
60.0 mm
spindle taper:
B 12
MATRA MDR 230, Metal Processing, Lathes, lathe-conventional-electronic

MATRA

MDR 230

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Equipment: - robust lead/spindle lathe - FAGOR "NV20" digital display - FORKARDT 3-jaw chuck Ø 250 mm - RÖHM 4-jaw chuck - without clamping jaws - key for jaw chuck - MULTIFIX tool holder "TYPE B" with 2x inserts - movable tailstock including pneumatic quill * including live center - spindle cover (retrofitted) - foldable lathe chuck guard (retrofitted) - swiveling machine light - coolant system - foot pedal with brake function - chip guard rear panel - various other accessories - original operating instructions

Lagernummer:
1008-9207368
turning length:
1000 mm
turning diameter over bed:
455 mm
turning diameter over slide rest:
280 mm
turning dia. in gap:
710 mm
FLOTT SB 16 ST, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

FLOTT

SB 16 ST

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - manual spindle feed - including thread cutting function - continuous speed adjustment (variomatic) - Digital drilling depth display at the front - Digital speed display at the front - Work table height adjustable via hand crank & T-slots - V-belt drive - pole-changing motor - EMERGENCY stop button at the front - Front main/toggle switch - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103752

Lagernummer:
1008-9103752
bore capacity in steel (diameter):
16.0 / 20.0 mm
throat:
240 mm
bore stroke:
100 mm
spindle taper:
2 MK
EISELE - Halbautomat VMS-III-S PV, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

** Machine from a vocational school (NL) ** maintained condition (!!) Furnishing : - semi-automatic vertical cold circular saw - pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment with fixed stops - Convenient stroke adjustment of the saw unit using a clamping lever - Generously sized gearboxes - with Eisele rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Coolant device * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164094

Lagernummer:
1008-9164094
dimensions of saw-blade:
Ø 320-350 x 3.0 mm
cutting range:
120 mm
capacity 90 degrees: square:
90 x 90 mm
capacity 90 degrees: flat:
200 x 90 mm
STARTRITE CF 315 M, Metal Processing, Saws, Cold Circular Saw

STARTRITE

CF 315 M

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Equipment: - manual crosscut/cold circular saw - for cutting profiles, pipes, solid materials - manual vice with star grip - including miter adjustment - ergonomic control handle - pole-changing drive motor - machine base frame

Lagernummer:
1008-9164101
dimensions of saw-blade:
315 mm
cutting range:
~ 105 mm
capacity 90 degrees: square:
~ 95 x 95 mm
capacity 45 degrees: round:
~ 100 mm
DARLEY EHP 50-20/15, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DARLEY

EHP 50-20/15

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Equipment: - electro-hydraulic press brake - DELEM CNC control model DA 24e * swiveling control panel, front left * tool & program library - CNC electro-motoric back stop (X axis) - 2x manually adjustable stop fingers * incl. lateral + vertical adjustment (R + Z axis) - 2x front support arms - 1x freely movable 2-hand/foot control - connection cable + plug

Lagernummer:
1008-9308216
pressure:
50.0 t
chamfer lenght:
2050 mm
distance between columns:
1550 mm
dayligth:
320 mm
AK BEND AKM 125 motor., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 125 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

** Exhibition machine from 2021 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - 4x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Lagernummer:
1008-847041
plate thickness:
1.25 mm
throat:
250 mm
distance between roll centers:
62.0 mm
engine output:
0.7 kW
DELTA LB 300, Metal Processing, Grinding machines, Flaring Cup Wheel Grinding Machine

DELTA

LB 300

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Flaring Cup Wheel Grinding Machine

Equipment: - GOUDSMIT magnetic clamping plate - optimal monolithic rigidity - additionally reinforced with a vibration-free column support arm * for the utmost precision and the most accurate finishing - wet grinding device (coolant device) - machine base - adjustable grinding wheel protection - main switch at the front

Lagernummer:
1008-9239004
grinding length:
330 mm
grinding width:
140 mm
workpiece height:
280 mm
spindle turning speed range:
2840 U/min
DURMA AD-R 30.100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DURMA

AD-R 30.100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** New price approx. 70.000 euros ** in mint condition ** with only approx. 3.431 operating hours (!!) ** Hydraulic motor operating time only approx. 834 hours ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=nODy9B1-nzk The AD-R series press brakes are characterized by user-friendly programming and high working speed. Thanks to their low energy consumption, precise bending processes and maintenance-free design, they offer real added value for your company. These machines are designed to be long-lasting and ensure reliable operation for many years, making the work much easier for the operator. ! Precise bending results at all times ! Shortest set-up and positioning times ! Maximum speed and safety ! Stress-relieved steel construction body ! durable monoblock frame Equipment: - CNC electro-hydraulic press brake - DURMA CNC control "DT-15" * 2D graphic color display and multi-simulation * Drawing input directly via the touch surface * Maintenance request via Internet * Diagnostic mode * Simple and intuitive operation * Product + tool library * Automatic calculation of bending processes * Linux operating system - Swiveling operation, front right - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motorized back stop (X axis) * Travel speed 500 mm/sec. * Travel accuracy 0.05 mm * Back stop with ball screw + linear guides - CNC electric height adjustment (R axis) * Travel speed 350 mm/sec. * manual adjustment of the stop fingers (Z1+Z2 axis) - manual table cambering, including analogue value display - AMADA upper tool holder, with upper wedge cambering & quick-change adapter - including UKB deer foot tool (split) - AMADA lower tool holder including die shoe - including UKB 4-V die (split) - 2x front - movable - robust support arms * mounted on a linear guide rail system - FIESSLER laser safety device at the front - LEUZE rear protective device - light barrier - 1x freely movable foot switch - Operating instructions (PDF) ** Special accessories included: - Tool sorting system (cabinet) with various bending tools

Lagernummer:
1008-9308437
pressure:
100 t
chamfer lenght:
3050 mm
distance between columns:
2600 mm
stroke of upper beam:
265 mm
LIMA 400 L, Other Metal Processing, Other machines, Trowalizing Machine

LIMA

400 L

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Trowalizing Machine

** good / well-maintained condition (!!) Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Lagernummer:
1008-9239007
filling capacity:
400 Liter
Usable Volume:
300 Liter
filling amount:
max. 850 kg
workpiece sizes:
max. 850 x 200 mm
KALTENBACH SKL 400, Metal Processing, Saws, Aluminium Circular Saw

KALTENBACH

SKL 400

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Lagernummer:
1008-9164080
saw blade diameter:
400 mm
cutting diameter:
135 mm
capacity 90 degrees: flat:
280 x 70 mm
capacity 90 degrees: square:
120 x 120 mm
TRENNJAEGER - Halbautomat VCT 400 HA, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

** Machine from a maintenance workshop ** well-maintained condition (!!) TRENNJAEGER spur gear: Proven thousands of times over for over 30 years, made of helical and hardened spur gears, with significantly higher efficiency and performance. Sawing machines with this saw gear are particularly suitable for stainless steels, acid-resistant or solid materials and thick-walled materials. Equipment: - robust electric semi-automatic circular saw - heavily dimensioned, powerful spur gear - electrical panel with individual functions including emergency stop button - pneumatic material clamping - saw head guided on column - flat guides on both sides - double-sided miter adjustment 45° - 90° - 45° - 30° * via mounted turntable * degrees engraved on turntable and base plate - machine base frame with integrated chip drawer - pole-changing motor (motor 2x speeds) - 1x pneumatic - vertical material vice - 1x circular saw blade

Lagernummer:
1008-9164096
saw blade diameter:
400 mm
cutting diameter:
140 mm
capacity 90 degrees: flat:
210 x 120 mm
capacity 90 degrees: square:
140 x 140 mm
ERMAK MICROBEND 10.40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

MICROBEND 10.40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop ** good condition (!!) ** New price ~ 28.000 euros ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=cTVHAQdmwLA Equipment: - CNC electro-hydraulic press brake - CYBELEC CNC control model "DNC 660S" * numerical control unit * monochrome screen * tool & product library * swiveling, front left - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) * stop guided on ball screws - FIESSLER AKAS laser protective device in front of the machine - AMADA/PROMECAM upper tool holder * including 5x new spacers, with wedge crowning (UKB 50.666) * including 5x new clamping jaws, with quick-clamping device (UKB 50.551) * including 1x ROLLERI upper tool 85° (835 mm) - AMADA/PROMECAM lower tool holder * including UKB 4-V die 85° - reversible (835 mm) * including ROLLERI die adapter rail for AMADA tools * including 1x die adapter rail for WILA/TRUMPF tools - Safety device = light barrier behind the machine - 2x front, adjustable support arms - 1x freely movable double foot switch including emergency stop button - CE mark/declaration of conformity - Operating instructions - Transport frame for forklift (selfmade)

Lagernummer:
1008-9308425
pressure:
40.0 t
chamfer lenght:
1000 mm
distance between columns:
800 mm
column arm:
250 mm
FIM / INDUMASCH VERSA 204, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual

Lagernummer:
1008-9397084
plate thickness:
4.0 mm ST
plate thickness:
3.0 mm VA
table-size:
1200 x 780 mm
blade length:
200 x 200 mm
IXION BS 30 AV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IXION

BS 30 AV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103736

Lagernummer:
1008-9103736
bore capacity in steel (diameter):
32.0 mm
bore capacity in cast iron:
36.0 mm
throat:
280 mm
bore stroke:
150 mm
DARLEY EHP-LS-80 31/25, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DARLEY

EHP-LS-80 31/25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good / well-maintained condition ** with many tools (!) Equipment: - CNC electro-hydraulic press brake - DELEM CNC control "DA 64" * swiveling control panel, front left * tool & program library - CNC controlled axes: Y1 + Y2 + X + CNC crowning - CNC electro-motoric back stop (X axis) * travel speed 200 mm/sec. * Travel accuracy 0.10 mm * Travel range max. 550 mm * Manual adjustment of the stop fingers (R+Z axis) * Number of stop fingers: 5x * 2x with pneumatic height adjustment - CNC - WILA electro-motoric table cambering - DARLEY upper tool holder, with many bending tools - DARLEY lower tool holder, including die adapter rail - Side + rear protective device (protective grille) - 2x freely movable 2-hand/foot controls - Original operating instructions

Lagernummer:
1008-9308438
pressure:
80.0 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
stroke of upper beam:
200 mm
AK BEND ASM 130-15/4.0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

ASM 130-15/4.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine from 2022 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Lagernummer:
1008-840009
sheet width:
1550 mm
plate thickness:
4.5 mm
pre-bending:
4.0 mm
roll length:
1550 mm
SIMASV AV 226/B, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

SIMASV

AV 226/B

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

** New price approx. 20.000 euros ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Lagernummer:
1008-9397096
plate thickness:
6.0 mm ST
thickness at "Niro-steel":
4.0 mm
plate thickness:
8.0 mm ALU
angle adjustable from - to:
30 - 140 Grad
VOEST ALPINE DA 180/1000, Metal Processing, Lathes, lathe-conventional-electronic

VOEST ALPINE

DA 180/1000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** good / well-maintained condition (!!) Furnishing: - 3-jaw chuck Ø 200 mm (CAMLOCK GR 6) - MULTIFIX steel holder, with 4x inserts - robust, movable tailstock - rotating center punch tips - Food key - various other accessories - Coolant device - removable chip tray - rear splash guard - Connection cable + plug - Emergency stop button - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207355

Lagernummer:
1008-9207355
turning length:
1050 mm
turning diameter:
380 mm
centre height:
180 mm
turning diameter over slide rest:
200 mm
GUALDONI G/61-Z, Metal Processing, Milling machines, Universal Milling Machine

GUALDONI

G/61-Z

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a vocational school (!) Furnishing : - robust / conventional universal milling machine - rotatable / swiveling vertical milling head - Stable T-slot clamping/angle table - automatic table longitudinal movement - Feed range adjustable - 8x steps - Pole-changing drive motor

Lagernummer:
1008-9131193
x-travel:
550 mm
y-travel:
155 mm
z-travel:
350 mm
taper in main spindle:
SK 30 / DIN 2080
LVD PPBL 135/40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

LVD

PPBL 135/40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=9kFvkLU3gQA Equipment: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back stop (X axis) * Positioning of the depth adjustment (Y1 + Y2 axis) * swiveling control panel, front right - electro-motorized back stop (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R + Z axis) - WILA manual table crowning, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotatable universal die block .. Dimensions 90.0 x 90.0 mm * V-openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2-hand/foot control - 2x front support arms - Protective device on the side + behind the machine (doors) - Operating instructions + circuit diagram (FR) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370

Lagernummer:
1008-9308370
pressure:
135 t
chamfer lenght:
4050 mm
distance between columns:
3150 mm
throat:
200 mm
GILDEMEISTER NEF 520, Metal Processing, Lathes, CNC Lathe
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
CNC Lathe

** from a maintenance workshop ** good condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=qwcmy6J86tw Equipment: - HEIDENHAIN CNC CYCLES control unit - FORKHARDT 3-jaw chuck Ø 250 mm including clamping jaws - 4-way tool holder with many inserts (!!) - AC main drive with electromagnetic ZF gear - cross slide with AC drives - fixed steady rest - front control panel including emergency stop button * with handwheel for X and Z axis * button for unlocking protective covers * button for cycle start/stop * button for setting the gear stage - coolant system with movable tray - tailstock with movable quill (handwheel) - manually lockable chip protection cover at the front - chip protection rear wall - protective cover for chuck - central lubrication - machine vibration feet - machine interior lighting - original operating instructions

Lagernummer:
1008-9207365
turning length:
1500 mm
turning diameter:
500 mm
turn - diameter over facing slide:
290 mm
spindle bore:
70.0 mm
INDUMASCH 200 H, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke

Lagernummer:
1008-9397077
plate thickness:
4.0 mm
thickness at "Niro-steel":
3.0 mm
blade length:
200 mm
angle adjustable from - to:
30 - 120 Grad
EHT VARIOPRESS 225-30, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

VARIOPRESS 225-30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

- in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right * High-resolution graphic color screen 14 inches * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) - 1x set of EHT deer foot upper tool - split (3.000 mm) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

Lagernummer:
1008-9308379
pressure:
225 t
chamfer lenght:
3050 mm
distance between columns:
2550 mm
column arm:
300 mm
KASTO - Halbautomat GKS 400 U, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - semi-automatic underfloor saw - with miter adjustment, swiveling left / right - hydraulic, vertical & horizontal clamping device - large work table - stepless feed from the saw blade - saw blade - machine base

Lagernummer:
1008-9164059
saw blade diameter:
400 / 425 x 40 mm
cutting diameter:
40 - 180 mm
cutting speed:
14/28 m/min
capacity 90 degrees: flat:
260 x 80 mm
BAYKAL APHS 125040, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APHS 125040

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** current new price approx. 65.000 euros ** very rarely used ** with approx. 1.070 operating hours (!!) ** good / well-maintained condition ** special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=Q-qCGgHopIQ ------------------------------------------------ BAYKAL APHS CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ------------------------------------------------ Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D display in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and display in actual size * USB interface * swiveling front left - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * travel speed .. 500 mm/s * with 2x manually adjustable stop fingers (Z Axis) - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - WILA electro-hydraulic upper tool clamping "NEW STANDARD PRO" * including split upper tools - ROLLERI electro-hydraulic lower tool clamping "SYSTEM A" * including split lower tools - Safety device at the rear: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - Operating instructions including circuit and hydraulic diagram

Lagernummer:
1008-9308439
pressure:
40.0 t
chamfer lenght:
1250 mm
distance between columns:
1070 mm
column arm:
410 mm
FASTI 106-20-2.0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FASTI

106-20-2.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - robust electro-mechanical three-roller drive - Driven by spur gear brake motor + countershaft - asymmetrical roller arrangement - electrical delivery of the rear roller * with automatic electrical switch-off * Setting min./max. travel distance possible - Rotatable control panel, front right - swing-out top roller, with folding bearing - Conical bending device - freely movable double foot switch * Right/left rotation of the rollers - Manual delivery of the bottom roller using a handwheel * with analogue position display - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401265

Lagernummer:
1008-9401265
sheet width:
2040 mm
plate thickness:
2.5 mm
pre-bending:
2.0 mm
diameter of upper rolls:
110 mm
FASTI 416-125-3, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

FASTI

416-125-3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

** good condition (!!) Furnishing: - heavy / robust beading machine - electric motor drive - Manual delivery of the top roller using a handwheel - pole-changing motor - 1x adjustable stop plate - 1x freely movable double foot switch - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9475037

Lagernummer:
1008-9475037
plate thickness:
3.0 mm
throat:
max. 500 mm
work speed:
6.0 + 12.0 m/min
distance:
Walze 125 / 150 mm
TRUMPF TrumaBend V50, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TrumaBend V50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

- in checked condition - machine videos - https://www.youtube.com/watch?v=SvTig3QXTMU https://www.youtube.com/watch?v=8nn3I4PjOWI Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic product display * 3D graphic bending simulation * tool & program library * including new LCD screen - CNC controlled axes: Y1 + Y2 / X / R / Z1+Z2 / I axis - CNC controlled back stop (X axis) - CNC controlled height adjustment of the back stop (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic die displacement (I axis) - TRUMPF hydraulic upper tool clamp * including split upper tool (UKB 15.620) - TRUMPF hydraulic lower tool clamp * including split lower tool (1V die/TRUMPF EV004-W12) - 1x freely movable 2 hand/foot controls - 1x freely movable foot switch - 2x front, movable material support arms - 1x rear safety device (swinging door) - 1x side safety device - left (swinging door) - 1x side safety device - right (swinging door) - TRUMPF original operating instructions

Lagernummer:
1008-9308431
pressure:
50.0 t
chamfer lenght:
1275 mm
distance between columns:
1040 mm
column arm:
410 mm
ATLANTIC XTS 3000, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ATLANTIC

XTS 3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325328

Lagernummer:
1008-9325328
sheet width:
3050 mm
plate thickness:
6.0 mm
cutting angle:
0.5 - 3.0 °
down holder:
18 Stück
MEP - Halbautomat TIGER 370 SX, Metal Processing, Saws, Cold Circular Saw

MEP - Halbautomat

TIGER 370 SX

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

** New price ~ 16.000 euros - in checked condition - machine video - https://www.youtube.com/watch?v=gxj5GWtTcDE Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

Lagernummer:
1008-9164064
cutting diameter:
120 mm
saw blade diameter:
370 mm
vice:
190 mm
capacity 90 degrees: flat:
180 x 95 mm
AMADA HFT 50-20, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

AMADA

HFT 50-20

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** very well maintained condition ** with only approx. 8.400 operating hours (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=FAkDFTi4LEk Equipment: - CNC electro-hydraulic press brake - CNC AMADA "CD 2005" graphic CNC control * compact design, small + portable * maximum ease of use * LCD screen * automatic angle calculation - CNC controlled axes Y1+Y2 - X - R - CNC-controlled back stop adjustment (X-axis) - CNC-controlled vertical adjustment of the stop fingers (R-axis) - 4x manual adjustment of the stop fingers left-right (Z axes) - AMADA System A upper tool clamp with wedge camber * including 1x set of split deer foot upper tools - 1x set of split lower tools - motorized FIESSLER safety device front - 1x freely movable double foot switch - original operating instructions

Lagernummer:
1008-9308423
pressure:
50.0 t
chamfer lenght:
2090 mm
distance between columns:
1665 mm
column arm:
400 mm
KUNZMANN WF 4/3 TNC 124, Metal Processing, Milling machines, Universal Milling Machine

KUNZMANN

WF 4/3 TNC 124

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control ** Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Lagernummer:
1008-9131162
x-travel:
400 mm
y-travel:
350 mm
z-travel:
400 mm
tool taper:
SK 40
EISELE - Halbautomat VMS 350 PV, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) ** Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Lagernummer:
1008-9164078
dimensions of saw-blade:
350 x Ø 40 x 3 mm
cutting range:
120 mm
capacity 90 degrees: square:
100 x 100 mm
capacity 90 degrees: flat:
170 x 100 mm
BEHRINGER - Vollautomat HBP 220 A, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Lagernummer:
1008-9173378
cutting diameter:
220 mm
capacity 90 degrees: square:
220 x 220 mm
turning speed range::
20 - 140 m/min
saw band length:
3720 x 34 x 1.1 mm
HESSE MSM 2030 x 1,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

HESSE

MSM 2030 x 1,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401257

Lagernummer:
1008-9401257
sheet width:
2030 mm
plate thickness:
1,0 mm
roll length:
2050 mm
roll diameter:
Ø 95,0 mm
BECK ROLLENBAHN - SET -, Metal Processing, Saws, Roller tracks / stop systems

BECK

ROLLENBAHN - SET -

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

** Roller conveyors - SET - unused (exhibition) ** current new price approx. 3.000 euros ** special price on request Equipment: - Roller conveyors - SET - includes: - 1x BECK feed roller conveyor * Conveyor width 500 mm * Length 2.000 mm * usable roller width 450 mm * Height: 880 +/- 60 mm - 1x BECK discharge roller conveyor, with length measuring device * Measuring conveyor with mm scale - manual measuring system * Conveyor width 500 mm * Length 3.000 mm * usable roller width 450 mm * Height: 880 +/- 60 mm * max. measuring length is conveyor length minus 260 mm * MOUNTING SIDE RIGHT

Lagernummer:
1008-9803045
:
2000 + 3000 mm
Working width:
450 mm
height adjustment:
880 +/- 60.0 mm
roll diameter:
60.0 mm
BOMAR ORBITAL 250 NII, Other Metal Processing, Other machines, Deburring Machine

BOMAR

ORBITAL 250 NII

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Deburring Machine

** good condition (!!) ** New price approx. 9.000 euros ** Special price on request The “Orbital 250 NII” brush deburrer is used to remove burrs from workpieces. The device can be used to process profile and solid materials up to 120 mm in diameter quickly and without great effort. The appropriate brushes and brush materials are available for different materials. The additional rotary movement of the entire brush head around the material’s longitudinal axis results in completely deburred outer and inner edges of the workpiece. The operator only needs to press the workpiece against the brush center. The “Orbital 250 NII” is available with a drive with two selectable fixed speeds. Equipment: - robust electro-motor brush deburring machine - pole-changing drive motor - manual adjustment of the front input/material opening - manual adjustment of the grinding brushes (handwheel) - easy access to the brushes - machine housing - movable on rollers (self-made) - side emergency stop button - connection cable + plug

Lagernummer:
1008-9239008
workpiece sizes:
max. 120 x 120 mm
diameter:
120 mm
Brush diameter:
250 mm
tool adaptor:
Ø 50.0 mm
VDF HEIDENREICH & HARBECK HAMBURG 430, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a workshop for the disabled (!!) Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray

Lagernummer:
1008-9207336
turning length:
1000 mm
turning diameter over bed:
430 mm
turning diameter over slide rest:
235 mm
spindle turning speed range:
11.2 - 2000 U/min
ZMM / HUVEMA HU 310 VAC, Metal Processing, Lathes, lathe-conventional-electronic

ZMM / HUVEMA

HU 310 VAC

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** New price ~ 23.000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Lagernummer:
1008-9207305
turning length:
750 mm
turning diameter:
310 mm
turning diameter over slide rest:
175 mm
spindle bore:
32,0 mm
VEB MIKROMAT DLZ 315x500/3eG, Metal Processing, Lathes, lathe-conventional-electronic

VEB MIKROMAT

DLZ 315x500/3eG

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Refurbished and repainted in 2013 ** Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Lagernummer:
1008-9207319
turning length:
600 mm
turning diameter over bed:
360 mm
turning diameter over slide rest:
190 mm
bed width:
295 mm
EHT ECOPRESS 135-30, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

ECOPRESS 135-30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

- in checked condition - machine video - https://www.youtube.com/watch?v=9p4LKjmo-os Equipment: - CNC electro-hydraulic press brake - CYBELEC CNC control Mod. DNC 1200 PS/B * Serial No. 0292 * swiveling control panel, front right * numerical programming * tool & program library * including external keyboard - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electro-motorized back stop (X axis) * with 4x manually movable stop fingers (Z axis) * Travel path max. 5.0 - 1,000 mm * Travel speed max. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel path max. 90 - 240 mm * Travel speed max. 100 mm/sec. - CNC under-table cambering - CNC pneumatic die shifting (I axis) - pneumatic upper tool clamping - manual lower tool clamping - rear protective grille, including pivoting door - 2x side protective grilles - 2x stable front support arms with "sliding system" - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - original operating instructions

Lagernummer:
1008-9308422
pressure:
135 t
chamfer lenght:
3050 mm
distance between columns:
2550 mm
dayligth:
320 - 560 mm
EHT VARIOPRESS 175-40-30, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

VARIOPRESS 175-40-30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good condition (!!) ** including new CNC control - in checked condition - machine video - https://www.youtube.com/watch?v=Owh6BjvZ4RM Equipment: - electro-hydraulic CNC press brake - with new CYBELEC "VisiTouch 19" touch CNC control (conversion) * graphic numerical 2D control * 19? modern, streamlined touchscreen with glass surface * can also be operated with gloves * clear, well-arranged menus in the operator's language * easy operation thanks to the user-friendly HMI * large tool and product library - CNC controlled axes: * Y1+Y2 / X+X1 / R / Z1+Z2 / BV1+BV2 / I + CNC crowning - CNC electro-motoric back stop adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 500 mm/sec. * Adjustment in X1 axis possible .. +/- 125 mm - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 85 - 235 mm * Adjustment speed .. max. 100 mm/sec. - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) - CNC-controlled / pneumatic die displacement (I axis) - 2x CNC-controlled front bending aids (BV axes) * Swivel angle max. .. 45 degrees * Swivel speed .. max. 45 degrees/sec. - CNC-controlled electric table crowning - pneumatic EHT upper tool clamp - pneumatic EHT lower tool clamp - 1x freely movable 2-hand/foot control - rear protective device (protective grille) - side protective device (swivel doors) - various bending tools - original operating instructions + circuit diagram etc.

Lagernummer:
1008-9308429
pressure:
175 t
chamfer lenght:
4050 mm
distance between columns:
3050 mm
column arm:
300 mm
KNUTH DL 425/4000 S, Metal Processing, Lathes, lathe-conventional-electronic

KNUTH

DL 425/4000 S

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** good / well-maintained condition (!!) ** original price at the time approx. 65.000 euros ** special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Lagernummer:
1008-9207375
turning length:
4000 mm
turning diameter:
850 mm
turning dia. in gap:
1150 mm
turning diameter over slide:
520 mm
GASPARINI PBS CB 165/3000, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

GASPARINI

PBS CB 165/3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine in good / well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=UBvKl7fWM3Y Equipment: - DELEM CNC control - model DA 65 * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back stop (X axis) - CNC controlled height adjustment of the back stop (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - GASPARINI hydraulic upper tool clamp - GASPARINI hydraulic lower tool clamp - many insert / bending tools (punches + dies) - 1x freely movable 2-hand / foot control - 2x front stable support arms - safety device at the rear (lockable Door) - Safety device on the side (swinging doors) - Original operating instructions + spare parts list (DE) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308355

Lagernummer:
1008-9308355
pressure:
165 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
450 mm
INDUMASCH 200 H, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397092

Lagernummer:
1008-9397092
plate thickness:
4.0 mm ST
plate thickness:
3.0 mm VA
table-size:
1200 x 780 mm
blade length:
200 x 200 mm
BAYKAL HGL 3100 x 6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

BAYKAL

HGL 3100 x 6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop ** with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Lagernummer:
1008-9325377
sheet width:
3060 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
distance between columns:
3100 mm
FALKEN RS 1550 x 90, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RS 1550 x 90

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine from 2020 ** Condition as NEW ** Special price on request Equipment: - manual asymmetrical 3-roller round bending machine - with manual drive - manual folding bearing - manual delivery of the rear roller - Bending rollers with profile grooves: 4/6/10 mm

Lagernummer:
1008-8405562
sheet width:
1550 mm
plate thickness:
2.0 mm
roll length:
1570 mm
roll diam. toproll:
90.0 mm
EUROMAC FX BEND 850, Metal Processing, Sheet metal working / shaeres / bending, Press Brake - Mechanical

EUROMAC

FX BEND 850

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Press Brake - Mechanical

** New price ~ 85.000 euros ** well-kept / very good condition (!!) ** with electromechanical direct drive (servo motor + ball screws) ** Machine is operated without hydraulic oil - in checked condition - machine video - https://www.youtube.com/watch?v=foxzKIA7vX8 https://www.youtube.com/watch?v=lCH06VShlHA Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Lagernummer:
1008-9308325
pressure:
20,0 t
chamfer lenght:
850 mm
distance between columns:
850 mm
back stop - adjustable:
375 + 400 mm
FALKEN RM 1270 x 90 MOT, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RM 1270 x 90 MOT

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine from 2020 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - motor-driven asymmetrical 3-roller round bending machine - hardened rollers - manual folding bearing for quick removal of the workpiece - profile inlets in the rollers - double foot switch for R/L running and emergency stop button - conical bending device - rear roller manually adjustable - electric safety device

Lagernummer:
1008-8405518
sheet width:
1270 mm
plate thickness:
2.5 mm
roll length:
1290 mm
roll diam. toproll:
90.0 mm
IBARMIA KM-25 VE, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

IBARMIA

KM-25 VE

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** from a training workshop (!!) ** New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop

Lagernummer:
1008-9093626
bore capacity in steel (diameter):
25.0 / 30.0 mm
throat:
150 mm
bore stroke:
120 mm
threading:
M18 / M22
OSTAS ORM 1070 x 110, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

OSTAS

ORM 1070 x 110

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** New price ~ 10.000 euros ** Exhibition machine - like NEW (!!) Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG)

Lagernummer:
1008-9401281
sheet width:
1070 mm
plate thickness:
4.0 mm
pre-bending:
3.0 mm
roll length:
1070 mm
MEXPOL C 20, Metal Processing, Milling machines, Universal Milling Machine

MEXPOL

C 20

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a disabled workshop (!!) Furnishing : - robust / conventional universal milling machine - Swivel control, right front - rotatable universal milling head - manual milling spindle feed, with locking - Stable T-slot clamping/angle table - Central lubrication unit - Machine swing feet - Coolant device, with lower pan

Lagernummer:
1008-9131172
x-travel:
420 mm
y-travel:
200 mm
z-travel:
330 mm
taper in main spindle:
ISO 40
EISELE - Halbautomat LMS-II-PV, Metal Processing, Saws, Aluminium Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

- in checked condition - machine video - https://www.youtube.com/watch?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Lagernummer:
1008-9164077
saw blade diameter:
350 mm
cutting diameter:
115 mm
capacity 90 degrees: flat:
200 x 80 mm
turning speeds:
1700/3400 U/min
GASPARINI PBS 45/2000 FP, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

GASPARINI

PBS 45/2000 FP

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good / well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=f0lMBgZD1VU Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308356

Lagernummer:
1008-9308356
pressure:
45,0 t
chamfer lenght:
2050 mm
distance between columns:
1600 mm
column arm:
300 mm
EISELE - Halbautomat PSU-H 471, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - electro-hydraulic semi-automatic cold circular saw - EISELE front control panel - robust and stable machine base - continuously adjustable feed speed of the saw blade - front guard / foldable - Drive via worm gear including “EISELE rotation compensation” - comfortable miter adjustment in both directions via large turntable - suitable for the use of Ø 400/425/450 saw blades - hydraulic material tension - Pole changer motor for the gear stages - Coolant device - User manual (PDF) - Duty cycle: - Turn on hydraulic pump motor - Tighten - Saw advance - Saw return - Relax * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164088

Lagernummer:
1008-9164088
saw blade diameter:
450 mm
cutting diameter:
150 mm
capacity 90 degrees: flat:
400 x 30 mm
capacity 90 degrees: flat:
345 x 70 mm
AK BEND APK 35, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 35

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** Exhibition machine from 2023 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Lagernummer:
1008-840422
I - beam section - flat steel:
120 x 15 (d 750) mm
I-beam section - upend:
60 x 10 (d 800) mm
L-beam:
50 x 5 (d 1200) mm
round material:
35,0 (d 800) mm
TRUMPF TRUMABEND 125/3.1, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND 125/3.1

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop ** with only approx. 33.550 operating hours (!!) - Machine video - https://www.youtube.com/watch?v=06QRagYtAYY Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 24 * swiveling control panel, front left * numerical programming * tool & program library - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motor adjustment of the back stop (X axis) - CNC pneumatic height adjustment of the back stop (R axis) - 4x manually adjustable stop fingers - electro-hydraulic WILA/TRUMPF upper tool clamp - manual WILA/TRUMPF lower tool clamp - 2x front support arms - manually movable - rear protective device (protective grille) - side protective device (protective grille) - 1x freely movable 2-hand/foot control - original operating instructions + more machine documents

Lagernummer:
1008-9308424
pressure:
125 t
chamfer lenght:
3050 mm
distance between columns:
2550 mm
column arm:
300 mm
TRUMPF TRUMABEND V85S, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND V85S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** with increased installation height / piston stroke ** very well maintained condition (!!) Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * tool & program library * graphic product display - CNC controlled axes: Y1+Y2 - X - R - Z1+Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - TRUMPF/WILA electro-hydraulic upper tool clamping - TRUMPF/WILA electro-hydraulic lower tool clamping - 1x freely movable 2-hand/foot control - 2x freely movable foot switches - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - oil cooler for continuous operation

Lagernummer:
1008-9308434
pressure:
85.0 t
chamfer lenght:
2550 mm
distance between columns:
2250 mm
column arm:
410 mm
HERMLE UWF 801, Metal Processing, Milling machines, Universal Milling Machine

HERMLE

UWF 801

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a training workshop ** maintained condition (!!) Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131203

Lagernummer:
1008-9131203
x-travel:
510 mm
y-travel:
450 mm
z-travel:
410 mm
taper in main spindle:
MAS BT 45° (SK40)
AK BEND APK 30, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** Exhibition machine from 2021 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German

Lagernummer:
1008-840456
L-beam:
40 x 5.0 (d 500) mm
I - beam section - flat steel:
80 x 15 (d 700) mm
I-beam section - upend:
50 x 10 (d 800) mm
round material:
30.0 (d 700) mm
ERMAK CNC HGS 3100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGS 3100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a specialist store (BAUHAUS) ----------------------------------------------------------- robust electro-hydraulic CNC swing beam shears * including CYBELEC CNC touch screen control * including CNC electro-hydraulic cutting gap adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic swing beam shears - CYBELEC CNC touch screen controller, model "CybTouch 6" - some functions of the CNC control: * Back stop preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting (cutting on scribe mark) .. and many more - CNC motorized back stop, travel = 5.0 - 1.000 mm (X axis) * on ball screws * automatically folds up at maximum travel, for longer cuts * including retraction function selectable ("swing-away function") * positioning accuracy 0.1 mm * travel speed 80.0 mm/sec. - CNC electro-hydraulic cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - ball rollers in the front support table - hinged finger guard, with safety switch * finger guard with viewing windows for cutting according to markings - cutting line lighting with silhouette - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - light curtain behind the machine (safety device) - 1x freely movable foot switch - CE mark/declaration of conformity - operating instructions + circuit diagram + hydraulic diagram

Lagernummer:
1008-9325394
sheet width:
3100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
down holder:
14 Stück
EP EQUIPMENT GKCZ0408-DL, Other Machines, Other attachments, working platform

EP EQUIPMENT

GKCZ0408-DL

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
working platform

** electric work platform like NEW ** with only about 10 operating hours (!!) Equipment: - mobile electric scissor work platform - for working at great heights - quick and effortless access to higher work areas - large work surface - electro-hydraulic lifting height adjustment (infinitely variable) - operation of the chassis + lifting frame effortlessly using a joystick * alternatively from the ground - chassis offers high mobility and stability - charging cable included in delivery

Lagernummer:
1008-9531730
Lifting height:
ca. 4.500 mm
weight:
1065 kg
battery:
24.0 V
AK BEND APK 61, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 61

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** Exhibition machine from 2022 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Lagernummer:
1008-8404430
I - beam section - flat steel:
80 x 20 (d 1200) mm
I-beam section - upend:
80 x 25 (d 2100) mm
L-beam:
50 x 50 x 6 (d 1000) mm
bar material - diameter:
40.0 (d 800) mm
TRUMPF TRUMABEND V 130, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND V 130

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine in a well-maintained condition (!!) ** with only approx. 31.800 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Lagernummer:
1008-9308398
pressure:
130 t
chamfer lenght:
3060 mm
distance between columns:
2690 mm
column arm:
410 mm
STAHLGRUPPE SG 56, Other Machines, Other attachments, Tool Trolley
Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Tool Trolley

** Manufacturer's recommended price approx. 8.000 euros ** Tool range: 390 pieces ** Special price on request!! Equipment: - mobile tool trolley including wooden worktop - robust and stable construction - aluminum drawer handles - 11x high-quality drawers - 9x drawers with equipment - including 390-piece tool range (!!) - Color = glossy green - 2x rigid castors / 2x steerable castors - including parking brake - central locking system

Lagernummer:
1008-8801034
Number of drawer:
11 Stk.
weight:
ca. 150 kg
table surface area:
1370 x 515 mm
work height max.:
1110 mm
KNUTH KHT 3206 C, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

KNUTH

KHT 3206 C

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop - good condition (!!) ** was only used sporadically according to the previous seller ** New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH "EASY-VIEW" touch CNC positioning control * Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle * for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of the cutting length for short strokes - Machine side stand with projection - 1x long side stop, including tilting cam and mm scale - 3x front support arms - Support table including ball rollers - rear protective device (safety doors) - front finger/encroachment protection - 1x freely movable foot switch including emergency stop button - "CE" marking - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325321

Lagernummer:
1008-9325321
sheet width:
3200 mm
plate thickness:
0.5 - 6.0 mm
cutting angle:
1° 30 °
no. of strokes:
14 Hub/min
BAYKAL APH-S 3104x90, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APH-S 3104x90

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good condition - with 1x set of new bending tools (!!) ** current new price approx. 80.000 euros ** special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=Xlb8EgQ8088 Equipment: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * graphic 2D programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - swiveling operation, front left - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motorized back stop (X axis) * with 4x manually adjustable stop fingers - CNC electro-motorized height adjustment of the back stop (R axis) - manually adjustable table crowning * including analogue value display * including hand crank for adjustment - AMADA upper tool Quick-change clamping * including crowning device in the tool holder - AMADA die adapter rail, bottom - 2x front, movable support arms ("sliding" system) - side protective device (swinging doors) - rear protective device (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF) ** Special accessories included: - 1x NEW split set of upper tools (4x 835 mm) * Angle 85° / Radius R 0.8 mm / Height 66.5 mm - 1x NEW split set of lower tools (4x 835 mm) * V openings: 16/22/35/50 mm * Height 60.0 mm / Angle 85° / Material=C45

Lagernummer:
1008-9308400
pressure:
90.0 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
TRUMPF TRUMABEND V 130, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND V 130

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** very well maintained condition ** with only approx. 10.300 operating hours (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=9X5SLXR2sIQ Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R + Z1/Z2 + I - CNC electro-motoric / controlled back stop (X axis) - CNC electro-motoric / controlled height adjustment (R axis) - CNC electro-motoric / controlled stop fingers (Z axes) - CNC electro-motoric / controlled die displacement (I axis) - CNC electro-motoric table cambering - TRUMPF / WILA hydraulic Upper tool clamp - TRUMPF / WILA hydraulic lower tool clamp - 1x freely movable 2-hand / foot control - 2x front sliding support arms - Safety device at the rear (sliding door) - Safety device at the side (swinging doors) - Original operating instructions

Lagernummer:
1008-9308420
pressure:
130 t
chamfer lenght:
3060 mm
distance between columns:
2690 mm
column arm:
410 mm
IMET SIRIO 350 AF-E CEB, Metal Processing, Saws, Cold Circular Saw

IMET

SIRIO 350 AF-E CEB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

** Current new price approx. 25.000 euros ** Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164086

Lagernummer:
1008-9164086
saw blade diameter:
350 mm
cutting diameter:
110 mm
capacity 90 degrees: flat:
180 x 85 mm
capacity 45 degrees: round:
105 mm
BOSCHERT K30-120 MINI S, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BOSCHERT

K30-120 MINI S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - 2x staking stops * with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090

Lagernummer:
1008-9397090
:
4.0 mm
:
3.0 mm
:
30 - 120 Grad
blade length:
150 x 150 mm
RSA RASAMAX Mono, Other Metal Processing, Other machines, Deburring Machine

RSA

RASAMAX Mono

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Deburring Machine

Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238987

Lagernummer:
1008-9238987
diameter of brush:
250 mm
width of brush:
80 mm
turning speed range:
1500 / 3000 U/min
voltage:
380 Volt
FIM / AMADA VERSA 204, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

FIM / AMADA

VERSA 204

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397088

Lagernummer:
1008-9397088
plate thickness:
4.0 mm ST
plate thickness:
3.0 mm VA
table-size:
1200 x 780 mm
blade length:
200 x 200 mm
LVD HST 31/6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

LVD

HST 31/6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** good / well-maintained condition (!!) Furnishing: - electro-hydraulic, gate-guided guillotine shears - Electric back gauge with analogue position display - electrical cutting angle adjustment - manual cutting gap adjustment, from behind - Control unit + control cabinet at the front left - 1x extra long side stop - 2x support arms - front finger protection - rear sheet metal slide - 1x freely movable foot switch - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325347

Lagernummer:
1008-9325347
sheet width:
3100 mm
plate thickness:
6.35 mm
thickness at "Niro-steel":
4.00 mm
cutting angle:
0.5 - 2.5 °
IXION BT 23 AV ST, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

IXION

BT 23 AV ST

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** Machine from a prototype construction ** good / well-maintained condition (!!) TABLE DRILL / DRILL HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Equipment: - pole-changing motor - including thread cutting function - manual spindle feed via cross handle + automatic spindle feed - drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - EMERGENCY STOP button at the front - machine base frame (table/self-made)

Lagernummer:
1008-9093646
bore capacity in steel (diameter):
23.0 / 28.0 mm
throat:
230 mm
bore stroke:
120 mm
spindle taper:
3 MK
MAXION BT 25 ST, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

MAXION

BT 25 ST

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** Machine from a maintenance workshop TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including coolant system - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093640

Lagernummer:
1008-9093640
bore capacity in steel (diameter):
25.0 / 30.0 mm
throat:
260 mm
bore stroke:
120 mm
spindle taper:
3 MK
DERATECH ULTIMA PLUS 160/4100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DERATECH

ULTIMA PLUS 160/4100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** current new price approx. 90.000 euros ** special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - ??in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

Lagernummer:
1008-9308426
pressure:
160 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
400 mm
DURMA DHGM 4006, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

DURMA

DHGM 4006

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop (!!) ** current new price ~ 65.000 euros ** Special price on request -------------------------------------------------- * electro-hydraulic swing cutting shears * with DURMA ENC 100M NC control * manual cutting gap adjustment (eccentric adjustment) -------------------------------------------------- Furnishing: - NC electro-hydraulic swing cutting shear - with DURMA ENC 100M control, swiveling operation at the front left * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x stable side stop with mm scale - Ball rollers in the front support table - hinged finger protection, with safety switch - 1x freely movable foot switch - Operation manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - Replacement scissor blades for DHGM guillotine shears * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325352

Lagernummer:
1008-9325352
sheet width:
4100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
distance between columns:
4120 mm
GWF MENGELE S 6 - 2000, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

GWF MENGELE

S 6 - 2000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** new price in 1998 approx. 33.500 euros ** very rarely used ** with only approx. 3.300 operating hours (!!) Equipment: - NC electro-hydraulic guillotine shears - electro-motorized back stop * with NC SIEMENS "S7" control unit - electro-adjustable cutting gap adjustment - electro-adjustable cutting angle adjustment - 1x stable side stop 1,500 mm with mm scale - 2x front support arms 1,500 mm - 1x freely movable foot switch - 2x EMERGENCY OFF buttons at the front - Operating hour counter - Control cabinet on the left - Original operating instructions

Lagernummer:
1008-9325361
sheet width - max.:
2050 mm
plate thickness:
6.0 mm ST
plate thickness:
4.0 mm VA
plate thickness:
8.0 mm ALU
SCHROEDER PDC 3200/3.0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHROEDER

PDC 3200/3.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** current new price including accessories approx. 65.000 euros (!!) ** special price on request The PDC motorized guillotine shear is the reinforced version of the MHSU. With more power thanks to a more stable design and a "DUO-CUT drive" on both sides. Equipment: - robust / motorized swing cut guillotine shears - electric back stop, with SCHRÖDER POS 100 NC control * digital position display of the back stop * adjustable from the front right * with target/actual value input * stepless adjustment over the entire travel range * limit values ??secured with limit switch * 9-way programming possible - break-proof, torsion-free steel welded construction - compact and clear machine design - all-steel knife - 1x hold-down bar - 1x long side stop - 2x front support arms, movable "Sliding System" - work table with recessed grips - rear protective device - 2x emergency stop buttons at the front - 1x freely movable foot switch - operating instructions (PDF) ** Special accessories included: - sheet metal holding device for thin sheet metal cuts

Lagernummer:
1008-9325385
sheet width:
3030 mm
plate thickness:
3.00 mm
thickness at "Niro-steel":
1.50 mm
no. of strokes:
34 Hub/min
AK BEND AKM 250 motor., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 250 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

** Exhibition machine from 2021 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Lagernummer:
1008-8470411
plate thickness:
2.5 mm
throat:
260 mm
distance between roll centers:
92.0 mm
weight:
295 kg
FASTI 2095-16-3, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FASTI

2095-16-3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** from a training workshop ** according to the seller with only approx. 400 operating hours (!!) - in checked condition - machine video https://www.youtube.com/watch?v=LVl-h5KyhDs Equipment: - robust electro-mechanical swivel bending machine - NC digital control unit - ELGO TYPE 85 - NC electro-motorized back stop * with rear sheet support surface * max. travel .. 1.000 mm - bending angle adjustment via electrical potentiometer * continuously adjustable * with digital value display - manual % automatic mode selectable - electrical adjustment of the travel paths of the upper beam - machine swing feet - 1x freely movable double foot switch - operating instructions * special accessories included: - 1x split goat's foot tool H = 120 mm * incl. tool holder rail - various other insert/bending tools

Lagernummer:
1008-9355202
sheet width:
1620 mm
plate thickness:
3.0 mm
thickness at "Niro-steel":
1.5 mm
distance between columns:
1700 mm
ATLANTIC ATSL 3013, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ATLANTIC

ATSL 3013

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Equipment: - electro-hydraulic / slide-guided sheet metal shears - front control panel, pivoting - front left - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, adjustable from behind - electro-motorized rear stop 10-1000 mm * 2x stable guide arms (with guides and drive spindle) * stop rail adjustable in parallel * with analog position display + handwheel for fine adjustment * display on a counter up to 0.1 mm - 1x side stop - 1x freely movable foot switch - front finger guard - operating instructions (PDF)

Lagernummer:
1008-9325335
sheet width:
3050 mm
plate thickness:
13.0 mm
thickness at "Niro-steel":
6.0 mm
cutting angle:
0.5 - 3.0 °
BOGE S5 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S5 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price: 8.848 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489109
feed pressure:
10.0 bar
Effective free air delivery:
700 L/min
motor:
400 V
0:
250 Liter
HACO TS 3012, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

HACO

TS 3012

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** very well maintained condition ** rarely used (!!) Equipment: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 9 (as good as new) * pre-selected positioning of the rear stop * digital display of the actual value * electro-hydraulic cutting angle setting with digital display * programmable retraction from the rear stop * programmable cutting length limitation * 1x emergency stop switch - electro-motorized rear stop, on recirculating ball screws - manual cutting gap adjustment, adjustable from the front - finger guard at the front - 1x side stop .. 1,000 mm - 4x front support arms - rear sheet metal slide - 1x freely movable foot switch - operating instructions (PDF)

Lagernummer:
1008-9325384
sheet width:
3050 mm
plate thickness:
12.0 mm ST
plate thickness:
8.0 mm VA
no. of strokes:
7 - 14 Hub/min
FALKEN R 1050 x 68, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

R 1050 x 68

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine from 2020 ** Condition as NEW ** Special price on request Equipment: - manual asymmetrical 3-roller round bending machine - with manual drive - manual folding bearing - manual delivery of the rear roller - Bending rollers with profile grooves: 4/6/10 mm

Lagernummer:
1008-8405560
sheet width:
1050 mm
plate thickness:
1.50 mm
roll length:
1060 mm
roll diam. toproll:
68.0 mm
DURMA SB 4006 HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

DURMA

SB 4006 HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** New price ~ 50,000 euros (!!) ** Special price on request ----------------------------------------------------------- NC electro-hydraulic swing cut shears * with DURMA "ENC 100 M" control * manual cutting gap adjustment (eccentric) * including pneumatic sheet holding device for thin sheet metal cuts ----------------------------------------------------------- Equipment: - robust electro-hydraulic swing cut shears - including DURMA "ENC 100M" NC control unit * Back stop pre-selection - X axis * Quantity * Cutting length limitation * Pivoting operation, left front - Monoblock welded steel construction made of high-quality steel - CNC electro-motorized back stop * with ball screw and linear guides * Automatic retraction of the back stop during the cutting process - Light barrier protection for access to the rear of the machine - manual cutting gap adjustment via eccentric - high-performance hydraulic cylinder made of SAM 1040 material - high-quality chrome-plated and finely ground hydraulic piston - split, fold-up finger guard 1,000 mm - easy handling of the sheets via ball rollers in the table - 1x long side stop including mm scale and tilting cam - 3x front support arms - 1x freely movable foot switch - operating instructions ** Special accessories included: - pneumatic sheet holding device for cutting thin sheet metal - up to max. material thickness - ST .. 3.0 mm

Lagernummer:
1008-9325363
sheet width:
4100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
no. of strokes:
12 - 24 Hub/min
BOGE S15 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S15 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 13.576 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489108
feed pressure:
10.0 bar
Effective free air delivery:
1.950 L/min
motor:
400 V
0:
250 Liter
FASTI 507-25-3.25, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

FASTI

507-25-3.25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325320

Lagernummer:
1008-9325320
sheet width:
2540 mm
plate thickness:
3.25 mm
throat:
100 mm
no. of strokes:
60.0 Hub/min
AMADA HFE 170-3, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

AMADA

HFE 170-3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** well-maintained condition (!!) ** with only approx. 29.400 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Lagernummer:
1008-9308392
pressure:
170 t
chamfer lenght:
3170 mm
distance between columns:
2700 mm
column arm:
420 mm
BOGE S7 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S7 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 9.450 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489106
feed pressure:
10.0 bar
Effective free air delivery:
1.000 L/min
motor:
400 V
0:
250 Liter
FASTI 204-12-1.75, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FASTI

204-12-1.75

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** good condition (!!) ** Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355182

Lagernummer:
1008-9355182
sheet width:
1270 mm
plate thickness:
1,75 mm ST
plate thickness:
2,00 mm ALU
plate thickness:
2,50 mm KU
METALLKRAFT SBM 140-12, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

METALLKRAFT

SBM 140-12

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

** Exhibition machine - like NEW (!!) Description: - Heavy and stable cast iron construction - handy and simple - adjustable lower shafts - steel shafts - adjustable stop plate - standard roller sets: S1-S8 - special key for disassembly and assembly of the rollers

Lagernummer:
1008-9475040
plate thickness:
1.20 mm
roll length:
140 mm
roll diameter:
62.0 mm
total power requirement:
manuell kW
FERINA VTZ 1000, Metal Processing, Saws, Band Saw - Vertical

FERINA

VTZ 1000

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

** Machine from a maintenance workshop ** very good condition with special accessories (!!) ** Rarely used Furnishing: - robust electric-motor vertical band saw machine - Frequency-controlled, stepless saw band drive * Infinitely adjustable via handwheel * including digital speed display - manual, stepless table feed - Continuous height adjustment of the belt guide - IDEAL butt welding machine model “BSS 016” * including cutting shears and grinding device - manually swiveling support table - Machine base - 2x EMERGENCY stop buttons - Connection cable including 16A plug - Machine light - original instruction manual * Special accessories included: - MICRO spray device (cooling saw band) - 3x X-RAY saw band rolls - 4x machine swing feet * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173360

Lagernummer:
1008-9173360
roll diameter:
420 mm
throat:
1000 mm
workpiece height:
400 mm
cutting speed:
25 - 1000 m/min
BOGE S11 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S11 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 11.056 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489107
feed pressure:
10.0 bar
Effective free air delivery:
1.450 L/min
motor:
400 V
0:
250 Liter
JOHANN FISCHER 87 690 NR.1, Other Metal Processing, Other machines, Measuring Plate

JOHANN FISCHER

87 690 NR.1

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Measuring Plate

Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003

Lagernummer:
1008-952108
length:
1000 mm
width:
750 mm
BOGE S4 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S4 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 7.476 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489122
feed pressure:
10.0 bar
Effective free air delivery:
490 L/min
motor:
400 V
0:
250 Liter
ERCOLINA CE40MR2, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

ERCOLINA

CE40MR2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** from a chamber of crafts / little used (!!) ** Manufacturer new price including accessories approx. 12.500 euros ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=6DmTi89lXzI Furnishing: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x driven rollers (MR2 model series) - divided roller segments - digital position display of the top roller (0.1 mm) - manual top roller adjustment - R/L running of the bending rollers - Bending speed 20% higher than machines of the same class - Shafts made of forged & ground chrome-nickel steel - Machine base - Horizontal and vertical work possible - freely movable control panel - CE mark - Instruction manual in German * Special accessories included: - 3x ERCOLINA STEEL roller set for pipes * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401270

Lagernummer:
1008-9401270
I - beam section - flat steel:
100 x 15 (d 500) mm
I-beam section - upend:
50 x 10 (d 500) mm
L-beam:
50 x 6.0 (d 600) mm
round material:
35.0 (d 500) mm
SCHROEDER MHSUV 3200/2.5, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHROEDER

MHSUV 3200/2.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** from a maintenance workshop ** including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions ** Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Lagernummer:
1008-9325359
sheet width:
3230 mm
plate thickness:
2.5 mm
thickness at "Niro-steel":
1.5 mm
no. of strokes:
28 - 42 Hub/min
SUNRISE PM - 80 LT, Metal Processing, Stamping press, Punching Press

SUNRISE

PM - 80 LT

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** good / well-maintained condition (!!) Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - large support table with movable stops - stepless stroke adjustment .. 10-100 mm - freely movable foot switch including protective cover - Crane hanging eye for easy transport - side storage areas - various punching tools (stamps + matrices) - Machine light - Collection container for punched material - Hydraulic unit, integrated - EMERGENCY STOP button, front - Three-phase motor, 400 volts, 50 Hz - User manual (PDF)

Lagernummer:
1008-9412179
pressure:
80.0 t
punching cross-cut in cmm:
Ø 25 in 23 mm
stroke:
10 - 100 mm
column arm:
510 mm