Machines

** very rarely used (!!) Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173350

** Demonstration/demo machine (!!) ** From our showroom (like new) ** With very few operating hours ** Current new price approx. €9.000 ** Special price upon request Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis ** BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE **

** from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base * Machinevideo : https://www.youtube.com/watch?v=UVpE_bLGHa0

** Demonstration/demo machine (!!) ** from our exhibition (like NEW) ** with very few operating hours ** current new price approx. 8.000 euros ** special price on request ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs (0 - 29) - each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode ** BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE **

** good condition (!!) ** current new price approx. 80.000 euros ** special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=dyv7iQXcRt4 Equipment: - electro-hydraulic CNC press brake - two synchronized cylinders with "HIGH PERFORMANCE" hydraulic components - with CYBELEC CNC control - "DNC 880S" * 2D graphic display for display and multiple simulation * graphic 2D programming * easy handling * automatic bending sequence calculation and collision detection * large product and tool library * automatic tonnage calculation (pressure) - swiveling operation, front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - upper beam with solid, self-lubricating four-way guide - CNC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers * Adjustment range up to max. 650 mm - CNC electro-motor height adjustment of the rear stop (R axis) * Adjustment range up to max. 250 mm - CNC electro-motor table cambering - AMADA/RAPID pneumatic upper tool clamp - AMADA lower tool holder, including die shoe - FIESSLER LASER safety device at the front - 2x front, movable support arms ("Sliding" system) - side safety device (swinging doors) - rear safety device (swinging door) - 1x freely movable foot switch - large hydraulic oil tank to keep the operating temperature low - original operating instructions

** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch

Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base

** Exhibition machine from 2023 ** with only approximately 2 operating hours ** Condition as new ** Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

** Exhibition machine from 2021 ** with only approximately 2 operating hours ** Condition as new ** Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

** Display machine from 2024 ** With only approximately 2 operating hours ** Like new condition ** Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

** Exhibition machine from 2023 ** with only approximately 2 operating hours ** Condition as new ** Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

** Display machine from 2024 ** With only approximately 2 operating hours ** Like new condition ** Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

** Machine from a maintenance workshop ** Current new price including accessories approx. 25.000 euros ** Special price on request Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - electro-motorized back stop, with analog position display * adjustable from the front * stepless adjustment over the entire travel range - 1x hold-down bar - 1x freely movable foot switch - front, extendable table extension - rear safety device - operating instructions (PDF)

** Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: https://www.youtube.com/watch?v=zagTSA81VyA

Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

** with increased installation height / piston stroke ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

** with increased installation height / piston stroke ** very well maintained condition (!!) ** with only approx. 28.500 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. ** further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

** Machine in a well-maintained condition (!!) ** with only approx. 31.800 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

** good / well-maintained condition (!!) Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

** Machine made from light metal production (ALU) ** good condition ** including special accessories such as sheet metal holding device - in checked condition - machine video - https://www.youtube.com/watch?v=pv7RRijDXJA Furnishing: - electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left * Pre-selection positioning of the backgauge * Digital display of actual position value * electro-hydraulic cutting angle adjustment * electro-hydraulic cutting gap adjustment * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-hydraulic cutting gap adjustment - electro-hydraulic cutting angle adjustment - electro-motorized back gauge, on ball screws - hydraulic hold-down devices - front finger protection - Ball rollers in the support table - 1x side stop, with mm scale - 1x freely movable foot switch - rear guard - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * for sheet thicknesses up to max. 4.0 mm * optimal positioning of thin sheets

Equipment: - robust electro-motorized swivel bending machine - bending angle adjustment via electrical potentiometer * multiple/subsequent bends are possible - electro-motorized back stop - with rear sheet support surface - manual lower beam adjustment - 1x freely movable double foot switch - operating instructions (PDF)

** Demonstration/demo machine (!!) ** from our exhibition (like NEW) ** with very few operating hours ALPMAC manufacturer video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC product video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased projection --------------------------------------------------------- ! MANUFACTURED FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! SMOOTH RUNNING DUE TO LESS OPERATING PRESSURE (50-60 DB) ! INDUCTION HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! BACK STOP COMPONENTS MADE FROM CAST ALUMINUM ! BACK STOP WITH POWERFUL DRIVE MOTOR (1.0 KW) ! MACHINE TABLE MADE OF ROBUST & RESISTANT STEEL (C45) Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" graphics/touchscreen * 2D graphic programming * 15" color TFT screen with high resolution * Bending sequence calculation * Product programming and display in real size * USB interface - CNC controlled axis: Y1 - Y2 - X - R - crowning - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. max. 750 mm * Travel speed X axis .. 350 mm/s * with 2x manually adjustable stop fingers - CNC electro-motorized height adjustment (R axis) * Travel path .. max. 250 mm - CNC electro-motorized Table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", system "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Safety device at the rear: light barrier - HAWE hydraulic components - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system * easy and keyless height adjustment - FIESSLER freely movable double foot control - CE mark / declaration of conformity

** Machine from a vocational school ** good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

** Demonstration/demo machine (!!) ** From our showroom (like new) ** With very few operating hours -------------------------------------------------- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

** Machine in good condition (!!) ** including replacement saw blades Equipment: - robust electro-hydraulic band saw - miter cuts from - 60° left to + 60° right - hydraulic unit for automatic saw bow raising - continuously adjustable saw bow lowering - mechanical reduction gear for band speed 20-100 m/min. - swiveling control panel - saw blade guide heads on linear guides - robust/stable vice with quick adjustment and linear guides - base frame with coolant tray and chip tray - designed for pallet truck transport - operating instructions DE (PDF)

** Exhibition machine from 2025 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x hydraulically adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

** from a vocational school - very good condition (!!) ** regularly receive a WEILER factory service ** particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall

** from a vocational school - very good condition (!!) ** regularly receive a WEILER factory service ** particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

- in checked condition - machine video - https://www.youtube.com/watch?v=SAxcRq3m9Pw Equipment: - electro-hydraulic 3-roller round bending machine - all rollers are driven - analogue position display of the side rollers - hand wheels for adjusting the parallelism - easy adjustment of the sheet - operation via hand lever - front - hardened rollers SAE 1050 CK 45 - electro-hydraulic folding bearing for removing closed pipes - electrical safety device - central lubrication - connection cable + connection plug

** Manufacturer's recommended price approx. 8.000 euros ** Tool range: 390 pieces ** Special price on request!! Equipment: - mobile tool trolley including wooden worktop - robust and stable construction - aluminum drawer handles - 11x high-quality drawers - 9x drawers with equipment - including 390-piece tool range (!!) - Color = glossy green - 2x rigid castors / 2x steerable castors - including parking brake - central locking system

** Machine in good condition (!!) The compact design, exceptionally large working area, and easy handling make this model a versatile workshop machine. High-precision saw blade guides, vibration-damping cast components, and thusabsolutely smooth operation are also part of the quality standard of this machine. Features: - Robust electro-hydraulic band saw - Miter cuts up to 60 degrees (one-sided) possible - Hydraulic unit for automatic saw blade raising - Continuously adjustable saw blade lowering - Continuously adjustable saw blade speed - Robust/stable manual vise - Manually adjustable saw blade guides - Manual saw blade tensioning (via handwheel) - Base frame with coolant tray and chip tray

Features: - Robust electric-driven folding machine - Bending angle adjustment via electric potentiometer - Manual backgauge * Adjustment via handwheel from the rear - Manual lower beam adjustment - 1x freely movable double foot switch - Main switch at the front

** From a maintenance workshop ** Good / well-maintained condition ** With only approx. 14.100 operating hours (!!) Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

** Good / well-maintained condition (!!) ** New price ~ €120.000 ** Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

** good / well-maintained condition (!!) ** original price at the time approx. 65.000 euros ** special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

** Good condition (!!) ** Current new price approx. 16.000 Euro ** Special price upon request Equipment: - Robust electro-hydraulic profile steel shears - With multiple workstations: * Flat steel shears * Profile steel shears * Hole punch * Notching station - Driven by hydraulic cylinders - Continuous stroke adjustment - Support table at punching station * Including material stop * Including material stripper - Support table for notching station (square notcher) - Side storage options - 1x GEKA electric contact length stop - 1x GEKA freely movable foot switch - Operating instructions (PDF)

** New price ~ 50,000 euros (!!) ** Special price on request ----------------------------------------------------------- NC electro-hydraulic swing cut shears * with DURMA "ENC 100 M" control * manual cutting gap adjustment (eccentric) * including pneumatic sheet holding device for thin sheet metal cuts ----------------------------------------------------------- Equipment: - robust electro-hydraulic swing cut shears - including DURMA "ENC 100M" NC control unit * Back stop pre-selection - X axis * Quantity * Cutting length limitation * Pivoting operation, left front - Monoblock welded steel construction made of high-quality steel - CNC electro-motorized back stop * with ball screw and linear guides * Automatic retraction of the back stop during the cutting process - Light barrier protection for access to the rear of the machine - manual cutting gap adjustment via eccentric - high-performance hydraulic cylinder made of SAM 1040 material - high-quality chrome-plated and finely ground hydraulic piston - split, fold-up finger guard 1,000 mm - easy handling of the sheets via ball rollers in the table - 1x long side stop including mm scale and tilting cam - 3x front support arms - 1x freely movable foot switch - operating instructions ** Special accessories included: - pneumatic sheet holding device for cutting thin sheet metal - up to max. material thickness - ST .. 3.0 mm

** Good/well-maintained condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

** good / well-maintained condition (!!) ** with only approx. 2,370 operating hours ** current new price approx. 60.000 euros ** special price on request in checked conditions - machine video - https://www.youtube.com/watch?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

** Demonstration/demo machine (!!) ** From our showroom (like new) ** With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

** from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram ** Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

** from a vocational school - very good condition (!!) ** regularly receive a WEILER factory service ** particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

** from a vocational school - very good condition (!!) ** regularly receive a WEILER factory service ** particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

** from a vocational school - very good condition (!!) ** regularly receive a WEILER factory service ** particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

** from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

** Very good condition (!!) ** Current new price including accessories approx. 90.000 Euro ** Special price upon request Equipment: - Robust electro-hydraulic 4-roll bending machine - 4-roll concept offers a wide range of bending and rounding options - MG NC control unit "ELAP LYNX" * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Freely movable control panel - Two central rolls are directly driven by hydraulic motors - Conical rolling is possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Pre-bending on both sides - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all components Bearings - Sturdy welded steel construction - 2x bending speeds selectable - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

** Very good condition (!!) ** Current new price including accessories approx. 135.000 Euro ** Special price upon request Features: - Robust electro-hydraulic 3-roll bending machine - All 3 rolls directly driven via planetary gears - Conical rolling possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Double-sided bending - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all bearings - Sturdy welded steel construction - 1 mobile control panel * with digital position indicators for the side rolls * Control via joysticks - 2 bending speeds selectable - Electro-hydraulic folding bearing for easy adjustment Pipe removal - Pressure gauge / pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - 2x staking stops * with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090

** From a maintenance workshop ** New price for basic machine including accessories ~ €17.000 ** Special price upon request Equipment: - Electro-hydraulic profile steel shear - Punching station, flat steel shear, angle/profile steel shear, . notching station * Including special equipment: bending station - Heavy-duty and stable welded construction - Continuously adjustable stroke - Very compact design - Support table at notching and punching station - Side support/storage surfaces - 1x adjustable electrical contact length stop - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF)

** Current new price including accessories approx. 100.000 Euro ** Special price upon request Equipment: - Robust electro-hydraulic 3-roll bending machine - Induction-hardened rolls - Robust machine body + stable welded construction - SIEMENS ELGO digital position indicator * Position indicator for the two side rolls - Freely movable control panel - Curved side roll feed - Electro-hydraulic conical bending device - Electro-hydraulic safety chuck - Pressure gauge/pressure indicator for the rolls - Operating instructions (PDF) * Special equipment included: - 2x AK BEND SIDE supports (lateral sheet metal support system) - Bending rolls with profile roll extension * Includes various profile rolls

Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238987

Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

** very good / well-maintained condition (!!) ** with lots of bending tools - in checked conditions - machine video - https://www.youtube.com/watch?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Description : - Safe hanging of device and supply line - in the weightless "state." - constant traction - Tear-proof steel cable

** Exhibition machine from 2025 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

** good condition (!!) ** Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355182

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325338

** from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325126

Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

** Machine from a technical college - prototype construction ** very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325278

** from a chamber of crafts / little used (!!) ** Manufacturer new price including accessories approx. 12.500 euros ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=6DmTi89lXzI Furnishing: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x driven rollers (MR2 model series) - divided roller segments - digital position display of the top roller (0.1 mm) - manual top roller adjustment - R/L running of the bending rollers - Bending speed 20% higher than machines of the same class - Shafts made of forged & ground chrome-nickel steel - Machine base - Horizontal and vertical work possible - freely movable control panel - CE mark - Instruction manual in German * Special accessories included: - 3x ERCOLINA STEEL roller set for pipes * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401270

** New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User manual in German

** from a maintenance workshop ** New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397087

** very well-maintained condition ** Machine with only approx. 7.700 operating hours (!!) Furnishing: - CNC control OPERATEUR for axes X,Y1+Y2,R1+R2,Z1+Z2 - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop fingers (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z-axis) - Hand control device on the foot switch for manual movement of the axes - freely movable two-hand control & foot switch - Tool top wedge crowning - type AMADA - various application tools - CE marking - 2x EMERGENCY stop buttons at the front - original documents such as operating instructions * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308346 * Machinevideo : https://www.youtube.com/watch?v=G4oZ0TFcD9c&feature=youtu.be

Features: - Electro-hydraulic metal band saw - With miter adjustment 45° right / 60° left - Manual saw cut (with manual lowering) - Hand switch on the saw frame (saw blade on/off) - Electro-hydraulic material clamping (close/open switch) * Includes handwheel for vise adjustment - Handwheel for manual saw blade tensioning - Coolant system - Emergency stop button at the front - Operating instructions (English)

Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG)

** Machine in good condition (!!) The compact design, exceptionally large working area, and easy handling make this model a versatile workshop machine.High-precision saw blade guides, vibration-damping cast components, and thus absolutely smooth operation are also part of the quality standard of this machine. Features: - Robust electro-hydraulic band saw - Miter cuts up to 45 degrees possible on both sides * Pivoting clamping jaws for miter cuts - Continuously adjustable saw blade lowering - Continuously adjustable saw blade speed - Robust/stable manual vise - Manually adjustable saw blade guides - Manual saw blade tensioning (via handwheel) - Many replacement saw blades

** Current new price including accessories approx. 70.000 Euro ** From a maintenance workshop ** Very good condition (!!) ** Special price upon request Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions ** Optional accessories included: - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

** Exhibition machine - like new ** Never been used (!!) ** Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator * Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug

** Display machine - like new ** Never been used (!!) ** Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

** Display machine - like new ** Never been used (!!) ** Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

** Display machine - like new ** Never been used (!!) ** Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Furnishing: - 2-column arbor press - large hand wheel - mechanical spindle locking in front - various tools - machine base

** Display machine - like new ** Never been used (!!) ** Special price upon request Features: - Electro-pneumatic pneumatic press - For closing folded edges - Easy operation - Pneumatic system equipped with air filter - Hardened folding rollers - 1x freely movable foot switch with emergency stop - Original operating instructions + CE declaration

** from a maintenance workshop ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=9kFvkLU3gQA Equipment: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back stop (X axis) * Positioning of the depth adjustment (Y1 + Y2 axis) * swiveling control panel, front right - electro-motorized back stop (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R + Z axis) - WILA manual table crowning, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotatable universal die block .. Dimensions 90.0 x 90.0 mm * V-openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2-hand/foot control - 2x front support arms - Protective device on the side + behind the machine (doors) - Operating instructions + circuit diagram (FR) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397088

** Exhibition machine - like new ** never been used (!!) ** Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

** Exhibition machine - like new ** never been used (!!) ** Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Furnishing: - SIEMENS - PLC control model OP 7 * Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected * Bending angle adjustment electronically preselectable 0-135 ° - electr. / controlled backgauge X = 1000 mm * with large sheet metal support surface - heavy welded construction - all drives both. via worm gear - Motorized adjustment of the bending beam - large adjustment range of the cheeks - hydraulic upper tool clamping - Insert / bending tools - Operation manual * Special accessories included: - separate split goat foot splint H 170 mm * Machine video: - https://www.youtube.com/watch?v=C3rwhUDtOKw

** From a maintenance workshop ** Good / well-maintained condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram ** Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

** From a maintenance workshop ** Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - Rear sheet chute - 1 freely movable foot switch - Operating instructions (PDF)

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397092

** from a training workshop ** maintained condition (!!) Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131203

** Exhibition machine from 2021 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - 4x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

** Current new price approx. 25.000 euros ** Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164086

** Good / well-maintained condition ** With special accessories (!!) Equipment: - NC electro-hydraulic guillotine shear "Sliding Guided" - Heavy-duty / stable welded construction (machine body) - NC ELGO digital control unit "P8721" - NC electro-motorized backgauge on recirculating ball screws - Electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball transfer units in the work table including recessed grips - Front finger guard - foldable at the front - 1x freely movable foot switch - 2x emergency stop buttons at the front - Operating instructions (PDF) Special accessories included: - Pneumatic sheet holding device for thin sheet metal blanks * Movable - on casters - 1x used Set of scissor blades

Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) ** Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Features: - Robust electric-driven folding machine - With dynamic, powerful drive motors - Manual/automatic operation selectable - Control panel, right front - Bending angle preselection via electric potentiometer - Manual lower beam adjustment - 1x used upper tool rail - 2x used lower tool rails - 1x freely movable double foot switch - Original operating instructions

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual

** From a maintenance workshop ** Very well-maintained / good condition ** With very few operating hours (!!) Features: - Robust electro-hydraulic, slotted-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Including digital actual value display - Manual cutting gap adjustment * Via handwheel from the front (left) * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Including digital actual position display * Rapid traverse is possible - 1x long side stop with T-slot + mm scale - Ball casters + recessed grips in the support table - Front finger guard - Rear sheet chute - Rear safety device - 1x freely movable foot switch - Original operating manual (Dutch language)

** Original price incl. special accessories ~ 72.000 euros ** Machine was very rarely used (!!) ** with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine ** Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : https://www.youtube.com/watch?v=3dqLbTme81E

Equipment: - Robust electric-driven folding machine - With dynamic, powerful drive motors - SCHRÖDER NC control unit "POS 400" * Bending angle preselection * Control panel, right front - Manual backgauge, adjustable from the rear * Adjustment range up to max. 750 mm - Manual lower beam adjustment - 1x freely movable double foot switch - 1x set of bending tools - Emergency stop button at the front - Original operating instructions

** Demonstration/demo machine (!!) ** from our exhibition (like NEW) ** with very few operating hours -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device

** From a maintenance workshop ** Current new price approx. 35.000 euros ** Special price upon request The MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. The MSS "oscillating cut" is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves. Features: - Robust, motorized swing-cut guillotine shears - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * with SCHRÖDER / ELGO NC control unit - Manual cutting gap adjustment * Centralized - adjustable with a simple handle - 1x hold-down bar - 1x sturdy 1.000 mm side stop - including T-slot and mm scale - 2x front support arms 1.000 mm - Grip recesses in the support table - 1x freely movable foot switch - Rear sheet chute - Operating instructions

Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

** Current new price approx. 23.000 Euro (!!) ** Special price upon request Equipment: - Industrial sandblasting system - Work area: 900 x 700 x 750 - Perforated sheet = work grate with stable support - 2 side openings with locking doors - Continuous blasting pressure adjustment - Pressure gauge - Pressure indicator - Front viewing window - 1 free-moving foot switch - Blasting gun + blasting gloves * 1 extra pair included - Operating instructions (PDF) * Includes special accessories: - 1 WIWOX filter and recovery system * Can be installed separately next to or behind the booth * Can be moved on casters with a parking brake (see Figure 9 - system lying down for transport purposes)

** From a maintenance workshop ** in good condition (!!) Equipment: - Simple NC-controlled hydraulic press brake - Including ATLANTIC NC control ATS 550 * Positioning of the backgauge (X) * Positioning of the depth adjustment (Y1 + Y2) * Possibility of programming various programs * Memory capacity: max. 200 programs - max. 400 sets * Pivoting control panel, front left * Emergency stop button - NC electro-motorized, continuously variable depth adjustment (Y1 + Y2 axes) - NC electro-motorized backgauge (X axis) * 2 manually adjustable stop fingers - Manual table crowning, including analog value display - 1 split upper tool set (not complete) * "AMADA" tool holder - SYSTEM A * Holder with upper wedge crowning - 1 split lower tool set (not complete) * Reversible - 4V opening (16/22/35/50 mm) - 2x side guards (swinging doors) - rear guard (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF)

** New price ~ 25.000 Euro (!!) ** Special price upon request Features: - Robust electric-driven universal milling machine - ACURITE 3-axis digital display * with pivoting control panel, front right * including emergency stop button - Electric adjustment of all axes (X/Y/Z axes) * Rapid traverse in all 3 directions - Pivoting milling spindle guard - Coolant system - Lower chip tray - Vertical milling head with quill adjustment * Milling head rotation 90° * Tool holder ISO / DIN 40 / 2080 - Fixed angle table 670 x 320 mm * T-slot width x spacing 12 x 60 mm * Minimum distance between base table and spindle axis - 4 machine feet - Electrical diagram

- in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right * High-resolution graphic color screen 14 inches * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) - 1x set of EHT deer foot upper tool - split (3.000 mm) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

** Machine in excellent condition (!!) ** New price ~ 19.000 Euro ** Special price upon request Features: - Robust semi-automatic electro-hydraulic band saw - Miter cuts from -60° left to +60° right - Designed for industrial use - Ideal for cutting solid material - Extremely stable and robust construction - Cast iron pulleys with a diameter of 500 mm - Continuously adjustable saw blade speed as standard - Microswitches control the highest and lowest positions of the saw arm - With a powered cleaning brush for optimal cleaning and maintenance of the saw blade - A fully hydraulic system controls the machine's workflow - With a cooling system on the saw blade guides - Blade guide equipped with adjustable carbide plates - Machine drive with low-maintenance, oil-lubricated worm gear . With a robust three-phase motor - Motor equipped with overload protection - The machine frame is made of a very solid steel construction - With a solid, precise two-column guide - Linear guides on both columns ensure a perfect cutting result - Includes cutting height limiter - The vise jaw is equipped with a long-stroke cylinder - Operating instructions (German) (PDF)

** from a vocational school (!) Furnishing : - robust / conventional universal milling machine - rotatable / swiveling vertical milling head - Stable T-slot clamping/angle table - automatic table longitudinal movement - Feed range adjustable - 8x steps - Pole-changing drive motor

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=kyDHkc9opN4 Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface - Manual lower beam adjustment - 1x freely movable double foot switch - 1x bending tool set - 2x emergency stop buttons at the front - Operating instructions (PDF)

** New price including accessories approx. 30.000 euros ** Special price on request The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y positioned accordingly and the material pushed to the stops. Through Pressing the foot pedal will then punch the hole Features of the machine: • Maintenance-free hydraulic drive • Infinitely variable stroke adjustment • Compact unit • Constant punching force Furnishing: - robust electro-hydraulic hole punch - TRUMPF tool system with many application tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * scanning head integrated in the stops * Energy chains for supply cable to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Staking device for zeroing the axes * Reading accuracy +/- 0.1 mm - Control panel: setup, single and continuous stroke - stepless lifting height adjustment - 1x pallet/box with application tools - freely movable foot switch * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412165

** In good condition (!!) ** New price ~ 13.000 Euro ** Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

** Current new price approx. 25.000 Euro (!!) ** Special price upon request The DyeMansion Powershot C is the indispensable addition to your 3D printing system. With the PolyShot cleaning process, components can be depowdered easily and efficiently. Using different blasting nozzles, the powder is removed from the surfaces quickly, automatically, and gently. The result is residue-free parts with a uniform surface finish. Features: - Industrial sandblasting system for 3D printing * For easy and efficient depowdering of components * Area of application: "Cleaning" * Process duration: 3-10 minutes - Compatible with all common powder bed technologies * Delivers residue-free parts for brilliant colors - Includes rotating basket - lined with stainless steel - Various blasting nozzles and ionization ensure . Reproducible results - Basket with soft, replaceable lining protects the parts . from damage (requires replacement) - Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket . and the parts contained * guarantees efficient powder removal - Pressure control valve for adjusting the inlet air pressure of the blasting nozzles - Pressure gauge for displaying the blasting pressure - Timer for setting the blasting duration

Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke

** From a maintenance workshop (Lufthansa) ** Good / well-maintained condition ** With many special accessories (!!) Equipment: - Robust / powerful universal milling machine - Including HEIDENHAIN digital display - 1x swiveling angle support table 420 x 800 mm - 1x T-slot vertical table (table slide) - 1x DECKEL double swivel milling head * Swiveling in 2 axes * Extendable quill - Horizontal milling spindle (without counterholder) - Automatic feeds in X/Z/Y axes * Including rapid traverse 1,500 mm/min. - 1x RÖHM hydraulic vise - Central lubrication system - Coolant system - Swiveling machine light - Splash guard tray - Separate control cabinet - Drawer cabinet with various accessories * Milling cutter holders / milling cutters, etc. - 1x Dividing head - Operating instructions (PDF)

** good condition (!!) ** including new CNC control - in checked condition - machine video - https://www.youtube.com/watch?v=Owh6BjvZ4RM Equipment: - electro-hydraulic CNC press brake - with new CYBELEC "VisiTouch 19" touch CNC control (conversion) * graphic numerical 2D control * 19? modern, streamlined touchscreen with glass surface * can also be operated with gloves * clear, well-arranged menus in the operator's language * easy operation thanks to the user-friendly HMI * large tool and product library - CNC controlled axes: * Y1+Y2 / X+X1 / R / Z1+Z2 / BV1+BV2 / I + CNC crowning - CNC electro-motoric back stop adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 500 mm/sec. * Adjustment in X1 axis possible .. +/- 125 mm - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 85 - 235 mm * Adjustment speed .. max. 100 mm/sec. - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) - CNC-controlled / pneumatic die displacement (I axis) - 2x CNC-controlled front bending aids (BV axes) * Swivel angle max. .. 45 degrees * Swivel speed .. max. 45 degrees/sec. - CNC-controlled electric table crowning - pneumatic EHT upper tool clamp - pneumatic EHT lower tool clamp - 1x freely movable 2-hand/foot control - rear protective device (protective grille) - side protective device (swivel doors) - various bending tools - original operating instructions + circuit diagram etc.

** Good / well-maintained condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=vISK1iCGZ_g Features: - Robust machining center - Vertical * Vertical milling and drilling machine in single-column design * With integrated coordinate table * Height-adjustable machine head with extendable spindle sleeve - CNC HEIDENHAIN control unit "TNC 415 B", front left * Includes separate remote control - Electric motor adjustment of all axes (X/Y/Z/W axes) * Rapid traverse in all 4 directions * X+Y axes .. max. 9.000 mm/min * Z axis .. max. 4.000 mm/min * W axis .. max. 4.500 mm/min - Continuously variable speed .. 50-9.200 rpm - Heavy-duty, robust coordinate table including 7 T-slots * Two telescopic steel covers protect the cross guides * X-axis: dovetail guide * Y-axis: preloaded roller shoes on hardened steel rails * Axis driven by ball screws * With preloaded double nuts * And DC servo motors mounted directly in the spindle axis * Both axes are equipped with linear scales (direct position measurement) - CNC-controlled machine head (W axis = feed axis) * Driven by DC servo motors / toothed belt drive and ball screw * Machine head is permanently mechanically clamped by disc spring assemblies * For a secure and stable connection between the head and the machine bed * Milling and drilling spindles are mounted in the quill, . requiring no maintenance * Spindle head according to DIN 2079 allows for the use of SK 30 tools * Tool changer with 32 positions - Machine base with two drawer cabinets for machine accessories * Includes numerous tools - Work area with fully protected cabin * With wide-opening cabin doors - Coolant with external coolant reservoir - VOGEL automatic central lubrication system * Supplies oil to the guides, spindles, and drive - Original operating instructions + spare parts lists

Description: The 1/BM grinding machine is capable of grinding standard twist drills, diamond and avyac drills with any drilling angle, taps, end mills, step drills, reamers, and countersinks, and of producing step drills. It also allows the regrinding of most workshop tools. Furthermore, thanks to its ease of use, no specialized personnel are required. The 1/BM machines all consist of a cross-shaped head housing the grinding unit and a swivel head with a tool spindle, as well as a flag-like device for core- pointing the drills. The swivel head is equipped with a six-position chuck, which, together with the positioning plate, ensures easy and precise clamping of the tool to be ground. It can be rotated to produce drills with any drilling angle. Furthermore, its cam mechanism allows for machining tools with up to twelve cutting edges (six with the included cams). Includes coolant system.

** with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - https://www.youtube.com/watch?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

** New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

** Current new price approx. 80.000 Euro ** Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=K4ymYMIJ7_Y ----------------------------------------------------------- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ---------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

** New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control ** Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

** from a prototype construction ** In good condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=3KZF0BT8dOQ Features: - Simple electro-hydraulic press brake, including torsion bar - Pivoting control panel, front left - Electro-motorized + stepless depth adjustment (Y1 + Y2 axes) - Manually adjustable material backgauge * Manually adjustable with hand crank - from the front * Includes analog position indicator * 2 manually adjustable stop fingers - 1 split pointed upper tool set - "HACO" holder - 1 rotating MULTI V die block (lower tool) - Side guard (pivoting doors) - 1 freely movable double foot switch - 2 sturdy front material support arms (homemade) - Operating instructions (PDF)

Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103736

** Good condition (!!) ** Current new price approx. €70,000 ** Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions ** Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

** In good condition ** With new rubber-coated top roll (!!) ** Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

** From a maintenance workshop ** vry good condition - rarely used (!!) ** New price including accessories ~ 25.000 Euro Equipment: - Robust electro-hydraulic profile steel shears * Punching station, flat steel shears, angle steel shears, profile steel shears - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Square notcher - Flat steel blade, 425 mm long, with four cutting edges * Also for 45° angle steel sections - Profile steel blade for cutting 90° angle steel * As well as round and square steel - Height-adjustable and retractable strippers - Safety guards at workstations - 1x freely movable foot switch ** Special accessories included: - 1x PEDDINGHAUS electric contact length stop, including support foot - Drawer cabinet with numerous accessories Punching tools ** Further technical specifications: Flat steel shears: * Cuts flat steel with minimal deformation .. 400 × 20 mm * L-shaped steel, 45° cut up to .. 120 × 12 mm * Blade cutting length .. 425 mm * Working height .. 800 mm Section and bar steel shears: * Shearing cross-section .. 2320 mm² * L-shaped steel, 90° cut .. 120 × 10 mm * Round steel .. 40 mm * Working height .. 1200 mm Notchers: * Sheets .. 13 mm * L-shaped steel .. 80 x 10 mm * U-shaped steel in the flange .. 80 - 140 mm * Notching width .. 52 mm * Notching depth .. 70 mm * Working height .. 1176 mm Hole punch: * Punching force .. 900 kN * Stroke rate .. 26 strokes/min * Punching throat .. 250 mm * Working height .. 1175 mm

** good / well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=f0lMBgZD1VU Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308356

Equipment: - Robust electro-hydraulic horizontal bending machine - Large worktable (1000 x 600 mm) - Hydro-mechanical stroke limiter - Continuously adjustable punch stroke - Side-mounted, one-handed operation - 1x bending tool set * Reversible die with 80/50/40 mm opening - Control cabinet - front

** New price ~ 23.000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

** Refurbished and repainted in 2013 ** Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

** In good condition (!!) ** current new price including accessories approx. 110.000 Euro ** Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram ** SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

** Machine from a vocational training center ** In good condition (!!) Features: - Compact design with electro-hydraulic quick clamping - Electric height adjustment - Automatic spindle feed - Heavy-duty / robust machine table - Thread cutting device - Pole-changing motor - Continuously variable speed adjustment * Including analog speed display - Machine base - 1x Machine vise - Emergency stop button at the front - Original operating instructions + machine card

** Machine from a vocational training center ** In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - Original operating instructions * Special accessories included: - 1x RÖHM "RB 110" hydraulic vise - 1x WALTER "UTA 150 E" dividing head - 1x drawer cabinet with numerous accessories (!)

** New price approx. 85.000 euros ** Machine with only approx. 1.000 operating hours (!!) ** good condition (!!) ** Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

** Good condition ** With new NC "SC 90" control unit (!!) Equipment: - Electro-hydraulic / slide-guided guillotine shear - HACO NC control model "SC 90" * Pre-selected backgauge positioning * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on recirculating ball screws - Hydraulically operated hold-down clamps - Front finger guard - Ball transfer units in the support table * Support table with recessed grips - 1x side stop with mm scale - 2x front support arms - 1x freely movable foot switch - Rear safety guard - Operating instructions in German (PDF)

** Machine from a maintenance workshop TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including coolant system - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093640

** Machine from a maintenance workshop ** good condition (!!) Equipment: - robust electro-mechanical sheet metal shears - heavy / robust drive motor - manual back stop, including analog position display * Adjustment range max. 735 mm * Adjustment from the front using a handwheel - 1x table side stop - 2x front support arms - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating unit - front left - rear safety device (grid enclosure) ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts

Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325320

** Original price including accessories approx. 40.000 Euro (!) ** Special price upon request - in checked conditions - machinevideo : https://www.youtube.com/watch?v=9t1mZUxODGI Equipment: - Robust electric-driven folding machine - With dynamic, powerful drive motors - SCHRÖDER NC control unit "POS 400" * Bending angle preselection * Control panel, right front - Manual backgauge, adjustable from the rear * Adjustment range up to max. 750 mm - Manual lower beam adjustment - 1x freely movable double foot switch - 1x set of bending tools - Emergency stop button at the front - Operating instructions (PDF)

** from a training workshop (!!) ** New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop

** From a maintenance workshop ** Good condition (!!) Equipment: - Electro-hydraulic swing cut sheet metal shear - Machine frame = all-steel welded construction - ELGO NC control, control panel at the front left * For positioning the electro-motorized backgauge * Target/actual position value input possible * Adjustment by three-phase motor via toothed belt - Support table with ball transfer rollers * Grip recesses are located between the table plates - Front finger guard - Hydraulically operated sheet metal hold-down clamps - 1x freely movable foot switch - Emergency stop button at the front - 1x movable scrap diverter (at the rear) - Operating instructions + circuit diagram ** Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks - 1x EHT extra-long side stop with mm scale & support foot - 1x EHT front - movable support arm

** from a maintenance workshop (!!) ** good condition ** new price ~ 35.000 euros -------------------------------------------- electric / hydraulic swing cut shears * with DURMA ENC 100 control * manual cutting gap adjustment -------------------------------------------- Equipment: - NC electro-hydraulic swing cut shears - with NC control - DURMA "ENC 100", pivoting - front left * back stop pre-selection - X axis * quantity * cutting length limitation * pivoting operation, front left - NC electro-motor-controlled back stop * travel = 1.000 mm (X axis) * on ball screws * travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down device - 1x side stop 1.500 mm including mm scale - 2x front support arms 1.000 mm - ball rollers in the front support table * including recessed grips - hinged finger guard, with safety switch - 1x freely movable foot switch - original operating instructions

Furnishing: - semi-automatic ALU circular saw - pneumatic material clamping - Stepless adjustment of the saw head lowering speed - Machine table with miter adjustment - Machine base

** Good condition (!!) ** According to the previous seller, with very few operating hours ** From a maintenance workshop Equipment: - Robust electro-hydraulic sheet metal shear * Design: Guide rail - LVD control panel centrally located on the front of the machine - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment * Adjustment from the front - via handwheel * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Continuously variable adjustment range * Analog position display * Rapid traverse possible - Ball transfer units + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating instructions * Special accessories included: - LVD movable sheet support device for thin sheet metal blanks - 1x LVD extra-long side stop (3.000 mm) with Support leg - 1x LVD used set of replacement blades

Features: - Robust electric-driven folding machine - Bending angle adjustment via electric potentiometer - Manual material/backgauge * Adjustment from the rear * Continuously variable adjustment range * Travel range up to 700 mm - Manual/automatic operating mode selectable - Manual lower beam adjustment - 1x freely movable double foot pedal - Operating instructions (PDF) * Special accessories included: - 1x split set of goat's foot tools (upper tool), height 140 mm

** New price in 2021 ~ 160.000 Euro ** Special price upon request Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) ** Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

** Exhibition machine from 2023 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

** current new price approx. 90.000 euros ** special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

** New price ~ €80,000 ** From a maintenance workshop ** In good condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=L6bUrMv-VOM Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control - Model "DNC60" * Pivoting control panel, front right * Numerical control unit * Tool and program library - CNC-controlled axes: Y1 + Y2 + X + CNC crowning - CNC electro-motorized backgauge (X axis) * With 2 manually adjustable stop fingers (R + Z axes) - CNC under-table crowning - FIESSLER front safety device - Upper tool holder with upper wedge crowning (AMADA) * Including split Rehfuß upper tool (AMADA) - Split 4V universal die (AMADA), in the die shoe - 2 front sliding support arms with "sliding system" - Side guards (pivoting doors) - Rear Safety device (light barrier) - Machine light in the rear area of the machine - 1x freely movable foot control - Original operating instructions

** from a maintenance workshop Equipment: - Robust electric-driven roll bending machine for single and series production - Manually adjustable side roller (2 hand cranks) - Manually adjustable lower roller (eccentric hand lever) - Asymmetrical roller arrangement - Manually swiveling upper roller - Rollers with profile inlets - Safety enclosures

** New price ~ €50,000 ** From a maintenance workshop - good condition (!!) Equipment: - NC electro-hydraulic press brakes - With DURMA NC control "ENC 310" * 128x64 pixel LCD display, illuminated * 30 programs with 20 steps each * Manual/semi-automatic/automatic operating mode selectable - Pivoting control panel, front left - NC-controlled axes: Y1 + Y2 + X - NC electro-motorized backgauge (X axis) * With 2x manually adjustable stop fingers * Including lateral and height adjustment (Z + R axes) - FIESSLER laser safety device at the front - Manual bending table crowning * Adjustment via hand crank * With analog value display - AMADA/PROMECAM upper tool holder * With upper wedge crowning & quick-change adapter * Split Deer-foot upper tool (AMADA) - AMADA/PROMECAM lower tool holder * Split 4V universal die, in the die shoe - 2x front support arms - Side guard (hinged doors) - Rear guard (hinged door) - 1x freely movable foot switch - Operating instructions (PDF)

Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

** Current new price approx. 40.000 Euro ** Special price upon request Equipment: - NC electro-hydraulic swing beam shear - ELGO NC control unit "P9521", front left - NC electro-motorized backgauge * Travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Positioning accuracy 0.1 mm * Travel speed 80.0 mm/sec. - Manual lateral cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - 1x freely movable foot switch - 2x front emergency stop buttons - Rear safety guard - Operating instructions (PDF)

** Good / well-maintained condition (!!) ** According to the seller, rarely used Equipment: - Simple conventional press brake - Manual material/backgauge * Adjustment from the front, via hand crank * With analog position indicator * 2x manually adjustable stop fingers - LVD split upper tools - LVD split 1V lower tools * Includes die adapter rail (slot) - 2x front, movable support arms - 1x foot switch/2-hand control - Side guards (hinged doors) - Rear guards (hinged door) - Original operating instructions

** Machine from a workshop for the disabled ** very good / well-maintained condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=jileVh2DvNA Equipment: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * High-resolution screen * Clear, easy-to-read menus in the operator's language * Tool & product library * Front right control panel, pivoting - CNC-controlled axes: Y1 + Y2 + X + R axes - CNC electro-motorized backgauge (X axis) * Max. travel 500 mm * Travel speed 180 mm/sec. - CNC electro-motorized height adjustment (R axis) * Max. travel 130 mm * Travel speed 50 mm/sec. - 3 manually adjustable stop fingers - BEYELER electro-hydraulic top tool clamping * Includes adapter from BEYELER to AMADA tools * 1 bending tool set - Manual table crowning - including analog value scale * Adjustment via hand crank * Includes adapter rail for BEYELER tools - 2 front material/sheet support arms - 1 freely movable two-hand control unit - 1 freely movable foot switch - Side guards (2 hinged doors) - Rear guards (1 hinged door) - Operating instructions for machine and control system

** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Equipment: - NC electro-hydraulic swing beam shear - DURMA "ENC 100" digital control unit * Operator control, pivoting to the front left - NC electro-motorized backgauge * Travel = 1.000 mm (X axis) * On recirculating ball screws - Manual quick cutting gap adjustment * Via eccentric (right side column) - Machine column with overhang (350 mm) - 1x extra-long side stop, with mm scale - 2x front support arms, with mm scale - Ball transfer units in the front support table - Front hinged finger guard - 1x freely movable foot switch - Rear safety device (protective grid) - 2x emergency stop buttons at the front - Operating instructions (PDF)

- in checked conditions - machine video - https://www.youtube.com/watch?v=agYajVdoam0 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * Pivoting control panel, front left * 2D graphic product display * Tool and program library - CNC-controlled axes: Y1 + Y2 / X / R / I axes - CNC-controlled backgauge (X axis) - CNC-controlled height adjustment of the backgauge (R axis) - 4 manually adjustable stop fingers - CNC-controlled, pneumatic die shift (I axis) - TRUMPF hydraulic upper tool clamp * including 1 set of split upper tools (1030 mm) - TRUMPF hydraulic lower tool clamp * including 1 set of split lower tools (1030 mm) - 1 free-moving 2-hand/foot control - 1 free-moving foot switch - 1 rear safety device (pivoting door) - 1x side safety device - left (swinging door) - 1x side safety device - right (swinging door) - Original operating instructions

** Machine from a maintenance workshop ** good condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=XeKgpsndsXk Equipment: - robust electro-mechanical sheet metal shears - heavy / robust drive motor - manual back stop, including analog position display * Adjustment range max. 640 mm * Adjustment at the back via handwheel - 1x table side stop - 2x front support arms - 1x freely movable foot switch - Control cabinet - left - rear safety device (grid housing) ** Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts

** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207330 * Machinevideo : https://www.youtube.com/watch?v=iqU7Bkh6INo

** Machine from a maintenance workshop ** very good condition with special accessories (!!) ** Rarely used Furnishing: - robust electric-motor vertical band saw machine - Frequency-controlled, stepless saw band drive * Infinitely adjustable via handwheel * including digital speed display - manual, stepless table feed - Continuous height adjustment of the belt guide - IDEAL butt welding machine model “BSS 016” * including cutting shears and grinding device - manually swiveling support table - Machine base - 2x EMERGENCY stop buttons - Connection cable including 16A plug - Machine light - original instruction manual * Special accessories included: - MICRO spray device (cooling saw band) - 3x X-RAY saw band rolls - 4x machine swing feet * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173360

** New price ~ 85.000 euros ** well-kept / very good condition (!!) ** with electromechanical direct drive (servo motor + ball screws) ** Machine is operated without hydraulic oil - in checked condition - machine video - https://www.youtube.com/watch?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

** Machine from a vocational school (!!) Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103742

** Exhibition machine from 2021 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price: 8.848 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 13.576 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 9.450 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 11.056 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 7.476 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)