Skip navigation

Machines

MEP PH 261-1 HB, Metal Processing, Saws, Band Saw

MEP

PH 261-1 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine, with one. Miter device up to 60 ° - hydraulic, stepless lowering of the saw bow - cuts from 0 ° to 60 ° left - coolant device - hydr. Lowering from the saw frame - autom. Limit shutdown - saw band - workpiece stop - Operating instructions in German

Lagernummer:
1008-8170055
cutting diameter:
225 mm
capacity 90 degrees: flat:
245 x 150 mm
capacity 90 degrees: square:
200 x 200 mm
capacity 45 degrees: flat:
160 x 140 mm
BERNARDO PS 250 S, Metal Processing, Grinding machines, Polishing Machine

BERNARDO

PS 250 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Polishing Machine

Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Lagernummer:
1008-8232019
wheel diameter:
250 mm
grinding wheel size:
250 x 25 x 20 mm
turning speeds:
2850 U/min
voltage:
400 V
FALKEN DPM-K 1070-100, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM-K 1070-100

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8371065
pressure:
100 t
stroke:
300 mm
table surface area:
1070 x 315 mm
column travel between the guideways:
1070 mm
ERMAK CNC HVR 3100-13, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HVR 3100-13

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8323029
sheet width:
3100 mm
plate thickness:
13,0 mm
thickness at "Niro-steel":
8,0 mm
down holder:
14 Stück
FALKEN DPM-K 1070-150, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM-K 1070-150

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge

Lagernummer:
1008-8371069
pressure:
150 t
stroke:
300 mm
table surface area:
1070 x 290 mm
column travel between the guideways:
1070 mm
A+B Mod. ACO-1, 220 Volt, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-1, 220 Volt

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - sanding belt - workpiece stop - Operating instructions in German

Lagernummer:
1008-8231111
width of the strips:
100 mm
band length:
920 mm
band speed:
7 m/sec
loading area:
300 x 150 mm
MEP - Vollautomat SHARK 332-1 NC 5.0, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 332-1 NC 5.0

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

Lagernummer:
1008-8174099
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: round:
260 mm
ERMAK CNC - HGS 4100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC - HGS 4100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321051
sheet width:
4100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
down holder:
18 Stück
A+B Mod. ACO-2, 400 Volt, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-2, 400 Volt

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - sanding belt - workpiece stop - Operating instructions in German

Lagernummer:
1008-823112
width of the strips:
200 mm
band length:
1490 mm
band speed:
8 m/sec
motor:
400 Volt
ERMAK POWER BEND FALCON 20.60, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 20.60

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8303217
pressure:
60 t
chamfer lenght:
2100 mm
distance between columns:
1700 mm
column arm:
410 mm
MEP PH 211-1 HB, Metal Processing, Saws, Band Saw

MEP

PH 211-1 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine with one. Miter device up to 60 ° left - hydr. Lowering of the saw bow, stepless feed adjustment - hacksaw band - Coolant device in the machine frame - Angle stop - Required instructions

Lagernummer:
1008-8170050
cutting diameter:
180 mm
capacity 90 degrees: square:
180 x 180 mm
capacity 90 degrees: flat:
200 x 150 mm
capacity 45 degrees: round:
115 mm
ERMAK SPEED BEND PRO 3.320, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 3.320

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308143
pressure:
320 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
FALKEN IR 1050 x 75 motor., Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

IR 1050 x 75 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets i.d. rolls - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - electr. safety device - Profile grooves : 4/6/10 mm

Lagernummer:
1008-8405563
sheet width:
1050 mm
plate thickness:
2,0 mm
roll length:
1050 mm
roll diam. toproll:
75,0 mm
MEP - Vollautomat SHARK 331-1 NC 5.0 Spider MDE, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 331-1 NC 5.0 Spider MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows “CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feeder with protective cover and safety limit switch - Positioning of the saw head and movement of the feeder using the joystick - Automatic recognition of the start of the cut - Electronic strap tension control - Automatic monitoring of the cutting load - Removable coolant pan * (equipped with 2 electric pumps for lubrication and cooling of the saw band) - Instructions DE

Lagernummer:
1008-8174119
cutting range:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: round:
260 mm
HM HS-2AS ERGO Motor, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

HM

HS-2AS ERGO Motor

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Description: Swivel bending machine with patented hydraulic auxiliary cylinder and Remote control. The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. The motorized function is over a remote control operated with an emergency stop. Version S - with segmented upper beam for boxes and special profiles - Max. Bending angle 135 ° - Max. Opening upper beam 45 mm - The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported - The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. - the motorized function is operated via a remote control with emergency stop

Lagernummer:
1008-8355023
sheet width:
1020 mm
plate thickness:
2,75 mm 400N/mm²
daylight opening:
45 mm
bending angle max.:
0 - 135 °
ERMAK CNC HGD 3100-13, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGD 3100-13

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321074
sheet width:
3100 mm
plate thickness:
13,0 mm
thickness at "Niro-steel":
8,0 mm
down holder:
14 Stück
FALKEN R 1050 x 68, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

R 1050 x 68

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm

Lagernummer:
1008-8405560
sheet width:
1050 mm
plate thickness:
1,50 mm
roll length:
1050 mm
roll diam. toproll:
68,0 mm
ERMAK POWER BEND FALCON 26.100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 26.100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8303218
pressure:
100 t
chamfer lenght:
2600 mm
distance between columns:
2200 mm
column arm:
410 mm
FALKEN MN 1,50, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

FALKEN

MN 1,50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

- Notching with a burr-free cut, without deformation of the cut edges - For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm - Body made of high-quality gray cast iron for precise work - Blades made of surface-hardened tool steel Furnishing: - manual notching machine - 2x material stops - Scales support tables - hand lever

Lagernummer:
1008-8392023
plate thickness:
1,50 mm
blade length:
150 x 150 mm
table::
450 x 300 mm
weight:
73,0 kg
MEP FALCON 352, Metal Processing, Saws, Cold Circular Saw

MEP

FALCON 352

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - Robust cast iron structure - Gear with bronze wheel and ground / hardened - Steel screw in a special oil bath - Vice with counter-clamping device for - double workpiece clamping - Electric coolant pump for cooling and lubrication of the saw blade Scope of delivery: - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded views - Crane eyes for transport * The machine is delivered without a saw blade Special accessories included: - Base cabinet with door (steel frame)

Lagernummer:
1008-8160021
saw blade diameter:
350 x 32 mm
capacity 90 degrees: round:
115 mm
capacity 90 degrees: square:
100 mm
capacity 90 degrees: flat:
130 x 80 mm
ALZMETALL ALZSTAR 18-T/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

ALZMETALL

ALZSTAR 18-T/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm * Item no .: 09. 434, - Euro

Lagernummer:
1008-80910
bore capacity in steel (diameter):
18,0 mm
throat:
190 mm
bore stroke:
80 mm
morse taper:
2 Kurzspindel MK
FALKEN PN 60 - 2, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

FALKEN

PN 60 - 2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Lagernummer:
1008-8392012
plate thickness:
2,0 mm
tube diameter:
60,0 mm
motor:
400 Volt
MEP FALCON 302, Metal Processing, Saws, Cold Circular Saw

MEP

FALCON 302

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - Robust cast iron structure - Saw blade shaft mounted on a spherical cast eccentric - Gear with bronze wheel and ground / hardened - Steel screw (double ball bearing) in a special oil bath - Vice with counter-clamping device for double - workpiece clamping - Vice jaws adjustable around the material - Tighten the saw blade if possible - Electric coolant pump for cooling and - Lubrication of the saw blade Standard equipment: - Adjustable length stop 600 mm (without scale) - tool kit - Detailed operating instructions, maintenance manual, Circuit diagrams and exploded views - Crane eyes for transport * The machine is delivered without a saw blade Special accessories included: - Base cabinet with door (steel frame)

Lagernummer:
1008-8165004
saw blade diameter:
300 x 32 mm
capacity 90 degrees: round:
90,0 mm
capacity 45 degrees: round:
70 mm
dimensions of saw-blade:
300 x 32 x 2,5 mm
FALKEN MTS 1300 x 75 motor., Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

MTS 1300 x 75 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roller bending machine - manual delivery of the rolls - Profile grooves - Foot control

Lagernummer:
1008-8405567
sheet width:
1300 mm
plate thickness:
1,50 mm
roll length:
1250 mm
roll diam. toproll:
75,0 mm
BERNARDO KBR 100 x 2000 DUO, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

KBR 100 x 2000 DUO

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Lagernummer:
1008-8230081
width of the strips:
100 mm
band length:
2000 mm
band speed:
15/30 m/sec
tube diameter:
20 - 76 mm
BERNARDO KF 20 L Super, Metal Processing, Boring mills / Machining Centers / Drilling machines, Drilling and Milling M/C

BERNARDO

KF 20 L Super

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Drilling and Milling M/C

Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Lagernummer:
1008-8131010
bore capacity in steel (diameter):
13,0 mm
x-travel:
300 mm
y-travel:
130 mm
turning speeds:
100 - 2500 U/min
ERMAK POWER BEND FALCON 37.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 37.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8308145
pressure:
220 t
chamfer lenght:
3760 mm
distance between columns:
3250 mm
column arm:
410 mm
ERMAK MICROBEND 10.40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

MICROBEND 10.40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - controlled axes: Y1 - Y2 - X axis - FIESSLER AKAS laser protection device in front of the machine - Back stop with 2x stop fingers and recirculating ball spindles - Quick change punch holder SYSTEM A - Upper deer foot tool, ground version - Universal die block 60x60 mm with 4V in the die shoe - SIEMENS electrical system - LEUZE light barrier behind the machine - BOSCH / HOERBIGER hydraulic system - 2x front support arms "sliding system" - Double foot switch - CE mark / declaration of conformity

Lagernummer:
1008-8308134
pressure:
40 t
chamfer lenght:
1000 mm
distance between columns:
800 mm
column arm:
250 mm
BERNARDO VMS 520, Metal Processing, Saws, Band Saw - Vertical

BERNARDO

VMS 520

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Lagernummer:
1008-8170247
roll diameter:
520 mm
throat:
520 mm
workpiece height:
310 mm
cutting speed:
25 - 500 m/min
ERMAK POWER BEND FALCON 4.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 4.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-830310
pressure:
220 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
ERCOLINA HB 60 - T, Metal Processing, Sheet metal working / shaeres / bending, Pipe-Bending Machine

ERCOLINA

HB 60 - T

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Pipe-Bending Machine

Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis * Bending segments on request

Lagernummer:
1008-8362029
tube diameter:
2" x 3,91 mm ST
tube diameter:
60 x 4,5 mm GAS
revolutions per minute:
2,5 U/min
radius:
min. 2 x D mm
ERMAK POWER BEND FALCON 4.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 4.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8303203
pressure:
175 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
FALKEN PK 25, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

FALKEN

PK 25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

- Can be used for bending pipes and profile materials - Including standard rollers for round bending of square materials - The top roller is set using an easily visible mm scale - As standard with foot pedal to control the right and left rotation - Can be used both horizontally and vertically - Bending rolls hardened and ground Furnishing: - Machine base - standard rollers (divided) - Lateral straightening rollers - Foot switch with emergency stop - Scale for top roller adjustment - CE mark / declaration of conformity - Operating instructions in German

Lagernummer:
1008-8405558
diameter:
Welle 30,0 mm
bending speed:
2,5 m/min
total power requirement:
1,1 kW
voltage:
400 V
ERCOLINA MediBender MB 42 M, Metal Processing, Sheet metal working / shaeres / bending, Pipe-Bending Machine

ERCOLINA

MediBender MB 42 M

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Pipe-Bending Machine

ERCOLINA MediBender "MB 42 M" - Capacity steel tube 42 x 3.0mm - Gas tube capacity 1"1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 260 mm - Minimum radius 2 x D - Hex tool holder - Min. outer diameter 5 mm - 1/8" gas Furnishing : - the control allows easy programming of the automatic cycle - with 30 programs x 9 bending and correction angles - it is possible to program the springback angle separately - Patented quick tool change system - a bending speed - free-moving footswitch

Lagernummer:
1008-8362016
tube diameter:
42,0 mm Stahl
wall strength:
3,0 mm Stahl
tube diameter:
54,0 mm CU/Alu
wall strength:
2,0 mm
RAGNAR HYDR 5-24, Metal Processing, Threading machines, Thread-Cutting Machine

RAGNAR

HYDR 5-24

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

Lagernummer:
1008-8104206
thread dia.:
bis M 24 M
turning speeds:
0-600 / 0-150 U/min
thread:
M5 - M24 M
working area:
2050 Rmax.
RAGNAR HYDR 5-16, Metal Processing, Threading machines, Thread-Cutting Machine

RAGNAR

HYDR 5-16

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16

Lagernummer:
1008-8104205
thread dia.:
bis M 16 M
turning speeds:
0 - 600 U/min
thread:
M 5 - M 16 M
working area:
2050 Rmax.
FALKEN R1 150x2280, Metal Processing, Grinding machines, Belt Grinding Machine

FALKEN

R1 150x2280

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Lagernummer:
1008-823822
width of the strips:
150 mm
band length:
2280 mm
revolutions per minute:
2880 U/min
roll diameter:
140 / 80 mm
AK BEND AHS 30/10, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 30/10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity - Required instructions

Lagernummer:
1008-8400197
sheet width:
3100 mm
plate thickness:
13,0 mm
pre-bending:
10,0 mm
diameter of upper rolls:
300 mm
ALZMETALL AX 3 iTRONIC-V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 iTRONIC-V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100657
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
AK BEND APK 50, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - Lower roller adjustment, hydraulic both lower rollers can be adjusted - Machine base - horizontal and vertical work use - Foot switch / control panel - standard rollers (divided) - 2 driven rollers - CE mark / declaration of conformity - Operating instructions in German

Lagernummer:
1008-8404204
I - beam section - flat steel:
80 x 16 (d 1200) mm
I-beam section - upend:
50 x 15 (d 1000) mm
L-beam:
50 x 5 (d 1200) mm
round material:
40,0 (d 800) mm
AK BEND AHS 30/16, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 30/16

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Lagernummer:
1008-8405571
sheet width:
3100 mm
plate thickness:
16,0 mm ST
pre-bending:
20,0 mm ST
diameter of upper rolls:
360 mm
AK BEND AHS 40/06, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 40/06

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Lagernummer:
1008-8405570
sheet width:
4100 mm
plate thickness:
8,0 mm ST
pre-bending:
6,0 mm ST
diameter of upper rolls:
300 mm
AK BEND AHS 25/08, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 25/08

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - Operating instructions in German - CE mark / declaration of conformity

Lagernummer:
1008-8400801
sheet width:
2600 mm
plate thickness:
10,0 mm
pre-bending:
8,0 mm
diameter of upper rolls:
230 mm
BERNARDO MS 150 x 2000 S, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 150 x 2000 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823844
width of the strips:
150 mm
band length:
2000 mm
band speed:
29,0 m/sek
grinding width:
460 x 150 Plantisch mm
AK BEND AS-M 90-10/3,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

AS-M 90-10/3,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - Asymmetrical 3-roll bending machine with motor drive - hardened rollers - Motorized rear roller adjustment - Upper roller can be swiveled out - Conical bending device - self-braking main engine - digital display - foot switch

Lagernummer:
1008-840012
sheet width:
1050 mm
plate thickness:
3,3 mm
pre-bending:
3,0 mm
roll length:
1050 mm
AK BEND APK 61, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 61

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard set of rollers, hardened - Lateral straightening rollers - mobile control panel - 3 driven rollers - digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - Operating instructions in German

Lagernummer:
1008-8404430
I - beam section - flat steel:
80 x 20 (d 1200) mm
I-beam section - upend:
80 x 25 (d 2100) mm
L-beam:
50 x 50 x 6 (d 1000) mm
bar material - diameter:
40,0 (d 800) mm
AK BEND APK 30, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - Machine base - horizontal and vertical work use - foot switch - standard rollers (divided) - foot switch - CE mark / declaration of conformity - Operating instructions in German

Lagernummer:
1008-840456
L-beam:
40 x 5 (d 500) mm
I - beam section - flat steel:
80 x 15 (d 700) mm
I-beam section - upend:
50 x 10 (d 800) mm
round material:
30,0 (d 700) mm
ERMAK SPEED BEND PRO 4.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-830220
pressure:
220 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
AK BEND AHS 30/06, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 30/06

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Lagernummer:
1008-8405569
sheet width:
3100 mm
plate thickness:
8,0 mm ST
pre-bending:
6,0 mm ST
diameter of upper rolls:
230 mm
BERNARDO TB 1020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 1020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Lagernummer:
1008-8355012
sheet width:
1020 mm
plate thickness:
2,5 mm
daylight opening:
48 mm
bending angle max.:
0 - 135 °
A+B FASTECH FP 40, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch

Lagernummer:
1008-8389013
pressure:
40 t
stroke:
285 mm
flat steel:
250 x 24 mm
working feed:
10,0 mm/sec
A + B RS, Other Accessories for Machine Tools, Other accessories for machine tools, Roll stand
Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Roll stand

Furnishing: - Safe workpiece support - by massive and heavy-duty galvanized steel rollers - Roller support steplessly height adjustable and clampable - Problem-free and efficient material transport for the supply and removal of workpieces techn. Details: - Load capacity, max. 700 kg - Standpipe diameter 74/52 mm

Lagernummer:
1008-8801021
roll diameter:
51 mm
Wheel width:
350 mm
weight:
20 kg
height adjustment:
575 - 975 mm
KUEHLMITTELEINRICHTUNG im SET, Textile Machines, Looms, Weaving machines, Accessories
Kategorie 1:
Textile Machines
Kategorie 2:
Looms, Weaving machines
Kategorie 3:
Accessories

Furnishing: - with plastic container (10 liters) and flexible hose - 230 V connection

Lagernummer:
1008-8801010
conveying height:
2,5 Meter
coolant capacity:
8,0 l/min
0:
11,0 ltr.
motor:
400 Volt
BERNARDO SMART 410-1000 Vario Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 Vario Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool

Lagernummer:
1008-8203099
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
A + B RB 3000 Abfuhr, Metal Processing, Saws, Roller tracks / stop systems

A + B

RB 3000 Abfuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Lagernummer:
1008-8801018
:
3000 mm
Working width:
360 mm
roll diameter:
60,0 mm
weight max. in kg:
900 kg
A + B VRS, Other Accessories for Machine Tools, Other accessories for machine tools, Roll stand

A + B

VRS

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Roll stand

Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg

Lagernummer:
1008-8801022
roll diameter:
51 mm
Wheel width:
125 mm
weight:
20 kg
height adjustment:
560-975 mm
FALKEN RB 3000x600 - Zufuhr, Metal Processing, Saws, Roller tracks / stop systems

FALKEN

RB 3000x600 - Zufuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red

Lagernummer:
1008-8801028
length:
3.000 mm
height:
ca. 660 - 815 mm mm
width:
600 mm
A + B RB 10 - 3000 Zufuhr, Metal Processing, Saws, Roller tracks / stop systems

A + B

RB 10 - 3000 Zufuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Lagernummer:
1008-8801015
:
3000 mm
Working width:
360 mm
roll diameter:
60,0 mm
weight max. in kg:
900 kg
IBARMIA IBERDRILL B 50, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IBARMIA

IBERDRILL B 50

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Lagernummer:
1008-8104209
Boring power:
50,0 mm
bore capacity in cast iron:
60,0 mm
bore stroke:
230 mm
thread dia.:
bis M 36 M
FALKEN RB 2000x600 - Zufuhr, Metal Processing, Saws, Roller tracks / stop systems

FALKEN

RB 2000x600 - Zufuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red

Lagernummer:
1008-8801030
length:
2.000 mm
height:
ca. 660 - 815 mm
width:
600 mm
BERNARDO GB 50 NC Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 50 NC Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

The gear column drilling machine GB 50 NC Vario is standard with a infinitely variable speed control, reducing the cutting speed can be optimally adapted to the workpiece. Because of the heavy, massive It is designed primarily for use by professional users or ideally suited in mechanical engineering or workshops. - Equipped with motorized table height adjustment as standard - 6 automatic drilling feeds switchable via electromagnetic clutch - Hand-scraped drilling table made of solid gray cast iron, swiveling from -45° to + 45 ° - Ground base plate with T-slots - for clamping particularly tall workpieces - Guaranteed concentricity = 0.02 mm, measured in the quill - Automatic tool ejector and thread cutting device as standard - Very smooth running thanks to ground gear wheels running in an oil bath - Stable and polished steel column, designed for heavy use - User-friendly operation via membrane keyboard Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - Motorized table lift - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - First filling with Shell Tellus 46 - LED machine operators - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Lagernummer:
1008-8100288
bore capacity in steel (diameter):
50,0 mm
throat:
360 mm
bore stroke:
220 mm
morse taper:
4 MK
LORCH MIG MAG M 304 *SET*, Metal Processing, Welding machines, Welding Unit

LORCH

MIG MAG M 304 *SET*

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Welding Unit

** LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm² - Pressure reducer with volume and content manometer - gas hose - Basket spool adapter K300 - Mains cable with CEE-16 plug - Manual

Lagernummer:
1008-8455055
welding power:
30 - 290 A (stufenlos)
welding power:
ED 60% 175 A
Wire thickness:
0,6 - 1,2 Stahl mm
Wire thickness:
1,0 - 1,2 ALU mm
BERNARDO SRB 40 NC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Rapid Radial Drilling Machine

BERNARDO

SRB 40 NC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Rapid Radial Drilling Machine

characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Lagernummer:
1008-8110004
threading:
30 M
bore capacity in steel (diameter):
40,0 mm
workpiece height max.:
380 - 785 mm
arm length:
985 mm
ISITAN BG 50, Metal Processing, Grinding machines, Belt Grinding Machine

ISITAN

BG 50

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing: - Transportable combination belt grinder - Workpiece support surfaces - Disc grinding station - Surface grinding station - CE declaration

Lagernummer:
1008-823117
width of the strips:
50 mm
band length:
1000 mm
total power requirement:
0,55 Volt
range L-W-H:
550 x 450 x 350 mm
FILTOO SIG 230 / BGIA, Metal Processing, Welding machines, Welding Smoke Suction

FILTOO

SIG 230 / BGIA

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Welding Smoke Suction

Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation: 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Lagernummer:
1008-8459706
volume capacity:
2500 m3/h
feed volume:
99,9 %
length:
3.000 Absaugschlauch mm
motor:
230 Volt
ERMAK SPEED BEND PRO 47.400, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 47.400

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308142
pressure:
400 t
chamfer lenght:
4270 mm
distance between columns:
3780 mm
column arm:
510 mm
JAVAC AVALON 40.1 AIR, Metal Processing, Welding machines, Plasma Cutting Device

JAVAC

AVALON 40.1 AIR

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Cuts carbon steel, stainless steel, aluminum, copper and more... The air plasma cutting system Avalon 40.1 Air with integrated compressor is Your reliable partner for demanding applications. Run with the Avalon 40.1 Air cuts up to a material thickness of 18 mm. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, pilot arc overload; Amenities included : - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Lagernummer:
1008-8459709
cutting range for steel to:
18,0 Trennschnitt mm
cutting range for steel to:
14,0 Qualitätsschnitt mm
capacity at 100%:
30,0 Ampere
cutting medium:
Druckluft
B + H 700/1122 A, Woodworking, Handling, Cupboard with drawers

B + H

700/1122 A

Kategorie 1:
Woodworking
Kategorie 2:
Handling
Kategorie 3:
Cupboard with drawers

Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable

Lagernummer:
1008-880255
:
6 St.
:
100 kg
range L-W-H:
705 x 736 x 1019 mm
weight:
126 kg
JAVAC AVALON 65 AIR, Metal Processing, Welding machines, Plasma Cutting Device

JAVAC

AVALON 65 AIR

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Cuts carbon steel, stainless steel, aluminum, copper and more... Cutting - clean and reliable. The air plasma cutting system Avalon 65 Air with integrated compressor is your reliable partner for the demanding use. Make slitting cuts up to with the Avalon 65 Air a material thickness of 35 mm. Properties: - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic arcing properties - CNC connection interface - HF-free arc ignition for increased reliability and low EMF exposure - Manual airflow activation switch to test air pressure set without firing the burner - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, Pilot arc overload - Mobile system with rollers Amenities included : - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Lagernummer:
1008-8459710
cutting range for steel to:
35,0 Trennschnitt mm
cutting range for steel to:
25,0 Qualitätsschnitt mm
capacity at 100%:
61,0 Ampere
cutting medium:
Druckluft
JAVAC AVALON 40.1 PFC, Metal Processing, Welding machines, Plasma Cutting Device

JAVAC

AVALON 40.1 PFC

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Cuts carbon steel, stainless steel, aluminum, copper and more... The AVALON 40.1 PFC is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and ease of use Handling makes them the ideal candidate for trade, workshop and industry. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, pilot arc overload; Amenities included : - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Lagernummer:
1008-8459708
cutting range for steel to:
25,0 Trennschnitt mm
cutting range for steel to:
20,0 Qualitätsschnitt mm
capacity at 100%:
25,0 Ampere
cutting medium:
Druckluft
FALKEN RM 1270 x 90 motor., Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RM 1270 x 90 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device

Lagernummer:
1008-8405518
sheet width:
1270 mm
plate thickness:
2,5 mm
roll length:
1270 mm
roll diam. toproll:
90,0 mm
ERMAK SPEED BEND PRO 4.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308146
pressure:
135 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
MEP - Halbautomat SHARK 282 SXI - Evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 282 SXI - Evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - either manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

Lagernummer:
1008-8170047
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: flat:
220 x 200 mm
LORCH MicorMIG 300 BasicPlus, Metal Processing, Welding machines, Welding Unit

LORCH

MicorMIG 300 BasicPlus

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Welding Unit

** LORCH authorized trader - other models on request Description: - A MIG-MAG system that can also use electrodes. Simply remove the burner, Connect the electrode holder to the additional electrode socket and Select electrode welding in the control panel. Furnishing: - Compact device, gas-cooled with synergy operation - stepless welding current setting - Volt & ampere indicator - 7-stage arc dynamic control - Synergy control - Welding program selection in the feed area - full upgradeability

Lagernummer:
1008-8455052
welding power:
MIG - MAG 30-300 A (stufenlos)
Type of gas:
Mischgas + Co2
Wire thickness:
0,6 - 1,2 Stahl mm
Wire thickness:
1,0 - 1,2 Alu mm
Winkelbieger WB 200, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop

Lagernummer:
1008-8362007
bending radius min.:
190 mm
square edge steel:
20 x 20 mm
flat steel:
100 x 7 mm
round bar steel:
22,0 mm
UNICRAFT SHT 2000, Other Machines, Other attachments, Lift table

UNICRAFT

SHT 2000

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Lift table

Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Lagernummer:
1008-8531614
weight max. in kg:
2000 kg
table length:
1300 mm
stroke height:
190-1010 mm
table width:
800 mm
ERMAK CNC - HGS 3100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC - HGS 3100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321040
sheet width:
3100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
down holder:
14 Stück
AB SCHWEISSERSCHUTZHELM Bestview IV, Other Accessories for Machine Tools, Other accessories for machine tools, Guarded
Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Guarded

The BESTVIEW IV automatically darkens in 1 / 30,000 of a second. The BESTVIEW IV is suitable for welding, as well as for grinding. Robust, impact-resistant cover, new improved turn-over headband mechanism, which adjusts the center of gravity of the wearer. High-performance solar cells make battery changes unnecessary 2x 3V lithium batteries (6 years service life)

Lagernummer:
1008-9486000
weight of the machine ca.:
435 Gramm
dimensions of the machine ca.:
110 x 90 x 9 Kassette mm
adjustable:
DIN 9 - 13 DIN
ERMAK CNC - HGS 2100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC - HGS 2100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-832101
sheet width:
2100 mm
plate thickness:
6,0 mm ST 42
thickness at "Niro-steel":
4,0 mm VA
cutting angle:
1,2 Grad
BERNARDO BM 2020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

BM 2020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever

Lagernummer:
1008-8355011
sheet width:
2020 mm
plate thickness:
2,0 mm
daylight opening:
124 mm
bending angle max.:
0 - 135 °
AK BEND ASM 130-15/4,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

ASM 130-15/4,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display

Lagernummer:
1008-840009
sheet width:
1550 mm
plate thickness:
4,5 mm
pre-bending:
4,0 mm
roll length:
1550 mm
SIEGMUND RP 3000, Metal Processing, Welding machines, Rotary Welding Table

SIEGMUND

RP 3000

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control

Lagernummer:
1008-8531686
weight max. in kg:
3000 kg
turning speeds:
1,7 U/min
height:
max. 1.620 mm
Torque:
Tisch 11.750 Nm
FALKEN DK 1900-200, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DK 1900-200

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge

Lagernummer:
1008-8371066
pressure:
200 t
stroke:
300 mm
table surface area:
1900 x 440 mm
column travel between the guideways:
1900 mm
ERMAK CNC - HGS 3100-6 HH MONO, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC - HGS 3100-6 HH MONO

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device (monoblock)

Lagernummer:
1008-8321044
sheet width:
3100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
distance between columns:
3100 mm
SIEGMUND RP 1250, Metal Processing, Welding machines, Rotary Welding Table

SIEGMUND

RP 1250

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control

Lagernummer:
1008-8531685
weight max. in kg:
1250 kg
turning speeds:
2,0 U/min
height:
max. 1.120 mm
Torque:
Tisch 490 Nm
BERNARDO GB 28 S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 28 S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Lagernummer:
1008-8100202
bore capacity in steel (diameter):
28,0 mm
threading:
12 M
bore stroke:
130 mm
throat:
250 mm
BERNARDO DMS 25 V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

DMS 25 V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Description: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - Standard with automatic quill feed - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Guaranteed concentricity = 0.02 mm measured in the quill - Comes with a coolant device as standard - Powerful drive motor even with continuous operation - Robust drilling machines for industrial use Furnishing : - Key chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Reduction sleeve MK 3/2 - coolant device - Separate emergency stop button - Height-adjustable protective cover

Lagernummer:
1008-8100203
bore capacity in steel (diameter):
25,0 mm
bore stroke:
130 mm
throat:
230 mm
table::
450 x 400 mm
AK BEND APK 35, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 35

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - Machine base - horizontal and vertical work use - foot switch - standard rollers (divided) - 2 driven rollers - CE mark / declaration of conformity - Operating instructions in German

Lagernummer:
1008-840422
I - beam section - flat steel:
120 x 15 (d 750) mm
I-beam section - upend:
60 x 10 (d 800) mm
L-beam:
50 x 5 (d 1200) mm
round material:
35,0 (d 800) mm
OPTIMUM HMS 125, Other Accessories for Machine Tools, Other accessories for machine tools, Vise

OPTIMUM

HMS 125

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Vise

Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable

Lagernummer:
1008-8801004
thickness of jaw:
127 mm
clamping width:
0 - 208 in 3 Stufen mm
clamping capacity:
4000 kg
total power requirement:
manuell kW
FALKEN DPM 775/30, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 775/30

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8371060
pressure:
30 t
stroke:
200 mm
table surface area:
775 x 190 mm
column travel between the guideways:
775 mm
FALKEN CKC 1020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FALKEN

CKC 1020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

- Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Quick and easy bending process using a bow handle - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Furnishing : - Segmented upper cheek - Segmented lower cheek - Foot clamp - Fixed stop angle adjustment

Lagernummer:
1008-8355076
sheet width:
1020 mm
plate thickness:
2,0 mm
daylight opening:
~ 54,0 mm
bending angle max.:
0 - 135 °
BOGE SOLIDScrew 11 B, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDScrew 11 B

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 6,340 euros Our SOLIDscrew screw compressors in the standard version you get from 4 to 75 kW. The particularly effective aftercooler and the Microprocessor controls SOLIDcontrol are one of SOLIDair's A matter of course! The extensive equipment of the SOLIDcontrol allows it is possible to connect it to a higher-level controller at any time The solid design, the removable doors and good accessibility for all Components make maintenance a breeze. Furnishing: - Industrial screw compressor - SOLIDcontrol control ** microprocessor ** Automatic selection of the most favorable operating mode depending on the compressed air requirement ** Automatic optimization of the motor switching cycles ** Pressure recording via pressure transmitter ** Integrated test mode of the outputs ** Connection for higher-level control

Lagernummer:
1008-8489061
feed pressure:
10 bar
Effective free air delivery:
1.450 L/min
Required air-pressure:
G 3/4 "
motor:
400 Volt 50 Hz
FINKEN VH 6-500, Metal Processing, Sheet metal working / shaeres / bending, Vacuum-Lifter

FINKEN

VH 6-500

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vacuum-Lifter

Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Lagernummer:
1008-8531720
carrying capacity:
500 kg.
number of suction cups:
6 Stück
suction cup dia.:
215 mm
0:
8,0 m³/h
BERNARDO GB 30 Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 30 Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Lagernummer:
1008-8100206
bore capacity in steel (diameter):
32,0 mm
threading:
22 M
bore stroke:
125 mm
throat:
280 mm
BERNARDO GHD 28 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GHD 28 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Lagernummer:
1008-8101006
bore capacity in steel (diameter):
28,0 mm
throat:
320 mm
bore stroke:
150 mm
morse taper:
3 MK
BERNARDO TBS 1020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TBS 1020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Scope of delivery : - Segmented upper cheek - Segmented lower cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Lagernummer:
1008-8355020
sheet width:
1020 mm
plate thickness:
2,0 mm
daylight opening:
48 mm
bending angle max.:
0 - 135 °
BOGE SOLIDbase 1000-15/500, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDbase 1000-15/500

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 4,990 euros Furnishing: - V-belt driven, robust, stationary piston compressor - mounted on a horizontal 500 liter container - for industrial applications - solid construction - High efficiency - low-wear barrel - Compressor pumps in two-stage design - The container is manufactured in accordance with Directive 2009/105 / EC - Condor quality pressure switch, including operating hours counter

Lagernummer:
1008-8489051
feed pressure:
15 bar
Effective free air delivery:
680 L/min
motor:
400 V
0:
500 Liter
BERNARDO TB 2020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 2020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Lagernummer:
1008-8355014
sheet width:
2020 mm
plate thickness:
2,0 mm
daylight opening:
122 mit Segmente mm
bending angle max.:
0 - 135 °
A+B Kreuztisch Modell KT 195, Other Accessories for Machine Tools, Other accessories for machine tools, Cross-Moving-Table

A+B Kreuztisch

Modell KT 195

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Cross-Moving-Table

Properties: for light milling work on table or crevice drilling machines Ground clamping surface Dovetail guide adjustable by means of wedge lines

Lagernummer:
1008-8801012
length:
685 mm
width:
460 mm
height:
115 mm
T-slot - width:
10 mm
BOGE SOLIDbase 1300-10/500, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDbase 1300-10/500

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 4,520 euros Furnishing: - V-belt driven, robust, stationary piston compressor - mounted on a horizontal 500 liter container - for industrial applications - solid construction - High efficiency - low-wear barrel - Compressor pumps in two-stage design - The container is manufactured in accordance with Directive 2009/105 / EC - Condor quality pressure switch, including operating hours counter

Lagernummer:
1008-8489050
feed pressure:
10 bar
Effective free air delivery:
890 L/min
motor:
400 V
0:
500 Liter
BERG & SCHMID GBS 218 Eco AutoCut, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 218 Eco AutoCut

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter cuts up to 60 ° left - cutting speed 35 + 70 m / min - Vice with quick clamping device - Belt tension control - machine base - electric automatic cooling - Operation manual Auto-cut system = 3-step system - Automatic lowering of the saw frame via the hydraulic cylinder - infinitely adjustable feed - with limit switch - High speed lowering of the saw frame from the rest position to the workpiece - then switch to normal saw feed - Manual mode

Lagernummer:
1008-8174051
cutting diameter:
220 mm
saw band length:
2455 mm
table height:
800 mm
cutting width:
230 mm
A+B HGK-5, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

HGK-5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Stable turning The HGK_Series has two synchronously operating drive units that are used for ensure continuous rotation with stepless speed control. The Roller spacing can be increased and decreased manually by means of socket pins in order to achieve a large diameter range of the workpieces. Properties: - For turning and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU rollers - The adjustment takes place via bolts - Remote control Scope of delivery: - 1x control

Lagernummer:
1008-8458504
weight max.:
5000 kg
table turning speeds:
6 - 60 m/h
roll diameter:
250 x 120 mm
workpiece diameter:
250 - 2.800 mm
ERMAK CNC HGD 3100-10 HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGD 3100-10 HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device

Lagernummer:
1008-8328164
sheet width:
3100 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
down holder:
14 Stück
MEP SHARK 282 CCS, Metal Processing, Saws, Band Saw

MEP

SHARK 282 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German

Lagernummer:
1008-8170051
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: round:
230 mm
BOGE SOLIDbase 870-10 ST, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDbase 870-10 ST

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 3,360 euros Furnishing: - space-saving, stationary piston compressor - with standing container - including star-delta contactor combination - Condor quality pressure switch - with operating hours counter

Lagernummer:
1008-8489047
feed pressure:
10 bar
Effective free air delivery:
650 L/min
motor:
400 V
0:
270 Liter
BERNARDO HBS 275, Metal Processing, Saws, Band Saw

BERNARDO

HBS 275

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Lagernummer:
1008-8170082
cutting diameter:
225 mm
saw band length:
2480 mm
table height:
910 mm
capacity 90 degrees: flat:
245 x 150 mm
SIEGMUND 28, Professional 750 3000x1500, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, Professional 750 3000x1500

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Lagernummer:
1008-8530024
table length:
3000 mm
table width:
1500 mm
table height:
850 mm
side-clamping surface::
200 (Höhe) mm
ISITAN IK 1,2 manuell, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

ISITAN

IK 1,2 manuell

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing: - various replacement rollers - hand crank - front stop

Lagernummer:
1008-847527
plate thickness:
1,2 mm
throat:
140 mm
distance between roll centers:
62,0 mm
total power requirement:
manuell kW
Abfuhrrollenbahn Digital Mod. A-Abfuhr, Metal Processing, Saws, Roller tracks / stop systems

Abfuhrrollenbahn

Digital Mod. A-Abfuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Description: - 3000 mm roller and measuring track type Exakt A standard - with digital position indicator el. connection 230 V 50 HZ with power pack - Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm) - Measuring stop can be adjusted from the workplace by means of a hand wheel - with pneumatic brake for fixing the dimensions. - Stable material stop trolley, 12 ball bearings - on a large guide profile. - The stop is adjustable and can be folded back manually. - Basic version of roller and measuring track - in stable steel construction, all versions are stationary - The max.measuring length is the track length minus 450 mm - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with axis Ø 15 mm - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web width: 500 mm, usable roll width 450 mm - Construction height: 880 +/- 60 mm - Color: feet anthracite gray RAL 7016, upper part silver gray RAL 7042 - Attachment side

Lagernummer:
1008-8801001
length:
3000 mm
Wheel width:
500 ( 450 ) mm
work height max.:
880 (+/- 60) mm
AK BEND AKM 125 motor., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 125 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing: - 5 sets of rollers - motor-driven beading machine - foot switch - Operating instructions in German - CE mark / declaration of conformity

Lagernummer:
1008-847041
plate thickness:
1,25 mm
throat:
250 mm
distance between roll centers:
62,0 mm
engine output:
0,7 kW
BERG & SCHMID GBS 242 DG AutoCut, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 242 DG AutoCut

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter cuts left 60 ° + right 45 ° - cutting speed 37 + 74 m / min. - Ball-bearing turntable for easy miter adjustment (durable) - Movable quick-release vice - Quick release lever - easy miter adjustment - for sawing solid material and profiles - Machine base with automatic cooling - electrical display and monitoring of the machine - Operation manual Auto-cut system = 3-step system - Automatic lowering of the saw frame via the hydraulic cylinder - infinitely adjustable feed - with limit switch - High speed lowering of the saw frame from the rest position to the workpiece - then switch to normal saw feed - Manual mode

Lagernummer:
1008-8170062
cutting diameter:
240 mm
capacity 90 degrees: square:
200 x 200 mm
capacity 90 degrees: flat:
285 x 200 mm
capacity 45 degrees: flat:
200 x 200 mm
BOGE SOLIDbase 680-15 ST, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDbase 680-15 ST

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 3,750 euros Furnishing: - space-saving, stationary piston compressor - with standing container - including star-delta contactor combination - Condor quality pressure switch - with operating hours counter

Lagernummer:
1008-8489048
feed pressure:
15 bar
Effective free air delivery:
470 L/min
motor:
400 V
0:
270 Liter
A+B PN 20/76, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

PN 20/76

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Description: The A + B PN 60/76 is a multifunctional grinding machine for pipe and Profile end grinding on the front, for grinding edges, surfaces and for cylindrical grinding on the back as well as for surface grinding on the Machine top. Scope of delivery: ++ including 7x grinding rollers - sanding belt - Hinged protective screen - Sanding and support table - Dust extraction nozzle - Required instructions

Lagernummer:
1008-8230079
width of the strips:
100 mm
band length:
2000 mm
band speed:
30 m/sec
tube diameter:
20 - 76 mm
A+B TR 1200, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

TR 1200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower

Lagernummer:
1008-8451052
weight max.:
1200 kg.
table turning speeds:
80 - 1600 mm/min.
roll diameter:
200 x 50 mm
workpiece diameter:
20 - 800 mm
UNICRAFT KW 50, Other Machines, Other attachments, Crane

UNICRAFT

KW 50

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Crane

Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge ** Model with 10 to. Lifting capacity also available

Lagernummer:
1008-8531615
lifting force:
5,0 t
height:
585 mm
width:
230 mm
weight of the machine ca.:
25 kg
HM TAS 75 X, Metal Processing, Grinding machines, Belt Grinding Machine

HM

TAS 75 X

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle ** including: integrated suction **

Lagernummer:
1008-823819
width of the strips:
75 mm
band length:
2000 mm
band speed:
34,0 mm/sek
grinding width:
530 Plantisch mm
PFAFF SILVERLINE, Other Machines, Other attachments, Fork Lift - Manual

PFAFF

SILVERLINE

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Fork Lift - Manual

Furnishing: - with tandem rollers - Nylon fork rollers - Rubber swivel castors - Fork width 160 mm

Lagernummer:
1008-853100
weight max. in kg:
2500 kg
fork length:
1200 mm
height of stroke:
115 mm
fork length:
1200 mm
BOGE SOLIDScrew 15 B, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDScrew 15 B

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 7.010 euros Our SOLIDscrew screw compressors in the standard version you get from 4 to 75 kW. The particularly effective aftercooler and the Microprocessor controls SOLIDcontrol are one of SOLIDair's A matter of course! The extensive equipment of the SOLIDcontrol allows it is possible to connect them to a higher-level controller at any time. The solid design, the removable doors and good accessibility for all Components make maintenance a breeze. the following variants are possible: - Maximum pressure 7.5 bar - 2.52 m³ / min. - Maximum pressure 10.0 bar - 2.20 m³ / min. - Maximum pressure 13.0 bar - 1.85 m³ / min. Furnishing: - Industrial screw compressor - SOLIDcontrol control ** microprocessor ** Automatic selection of the most favorable operating mode depending on the compressed air requirement ** Automatic optimization of the motor switching cycles ** Pressure recording via pressure transmitter ** Integrated test mode of the outputs ** Connection for higher-level control

Lagernummer:
1008-8489054
feed pressure:
10 bar
Effective free air delivery:
2.200 L/min
Required air-pressure:
G 3/4 "
motor:
400 Volt 50 Hz
BOGE SOLIDdrive 650-15, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDdrive 650-15

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 1,800 euros Furnishing: - Mobile piston compressor / easy handling - The tried and tested for professional craft and industrial companies. - V unit with proven solid compressor technology - oil-lubricated - V-belt drive - two-stage - Stopcock on the container

Lagernummer:
1008-8489049
feed pressure:
15 bar
Effective free air delivery:
375 L/min
motor:
400 V
0:
90 Liter
MB PRO 3 COM 1000, Metal Processing, Welding machines, Rotary Welding Table

MB

PRO 3 COM 1000

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Lagernummer:
1008-845902
table diameter:
340 mm
table load:
290 horizontal kg
table load capacity:
190 vertikal kg
turning speeds:
0,6 - 6,0 U/min
BERNARDO UWF 110, Metal Processing, Milling machines, Universal Milling Machine

BERNARDO

UWF 110

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

Furnishing : - Universal milling head, adjustable to all angular positions - Swiveling control panel with ergonomically mounted switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable V-ledges in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Standard with automatic table feed in x and y axes - Precise surface-machined cross table with T-slots - Digital position display for x, y and z axes included in the scope of delivery scope of delivery : - 3-axis digital display ES-12 H with LCD display - LED machine light - coolant device - Central lubrication - counter bearing - Long milling arbor 32 mm - Feed for x- and y-axis - Positioner motor for z-axis - coolant pan - Adjustable guard - operating tool

Lagernummer:
1008-8131011
x-travel:
750 mm
y-travel:
250 mm
z-travel:
400 mm
spindle taper ISO:
40 ISO
BERNARDO B 610 PRO, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

B 610 PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Lagernummer:
1008-8101010
bore capacity in steel (diameter):
32,0 mm
throat:
255 mm
bore stroke:
120 mm
morse taper:
4 MK
BOGE SOLIDbase 520-10/270, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDbase 520-10/270

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 1,950 euros Furnishing: - stationary industrial piston compressor - with the container lying on its side

Lagernummer:
1008-8489053
feed pressure:
10 bar
Effective free air delivery:
420 L/min
motor:
400 V
0:
270 Liter
MEP - Halbautomat SHARK 332-1 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 332-1 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

Lagernummer:
1008-8170067
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
MB PRO 2 COM 1802, Metal Processing, Welding machines, Rotary Welding Table

MB

PRO 2 COM 1802

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right / left rotation - stepless speed control - welding torch on / off - Adjustable lap welding

Lagernummer:
1008-8459010
table diameter:
340 mm
table load:
160 horizontal kg.
table load:
100 vertikal kg.
turning speeds:
0,6 - 6,0 U/min
UNICRAFT SSK 3.1, Other Machines, Other attachments, Sandblasting Machine

UNICRAFT

SSK 3.1

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Lagernummer:
1008-8809015
dimensions::
innen 1160 x 580 x 580 mm
Air consumption:
400 - 800 l/min.
air pressure:
3,4 - 8,0 bar
workpiece weight:
max. 120 kg
UNICRAFT SSK 4, Other Machines, Other attachments, Sandblasting Machine

UNICRAFT

SSK 4

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Lagernummer:
1008-8809016
dimensions::
innen 1160 x 870 x 850 mm
Air consumption:
400 - 800 l/min.
air pressure:
3,4 - 8,0 bar
workpiece weight:
max. 150 kg
ALZMETALL ALZSTAR 40 iTRONIC -V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 40 iTRONIC -V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100653
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
ERMAK CNC - HGS 3100-6 HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC - HGS 3100-6 HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device

Lagernummer:
1008-8321043
sheet width:
3100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
distance between columns:
3100 mm
BERNARDO MS 75 x 2000 S, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 75 x 2000 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823843
width of the strips:
75 mm
band length:
2000 mm
band speed:
29,0 m/sek
grinding width:
460 x 75 Plantisch mm
ERCOLINA MediBender 070, Metal Processing, Sheet metal working / shaeres / bending, Pipe-Bending Machine

ERCOLINA

MediBender 070

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Pipe-Bending Machine

Description : - MediBender "070" digital - with maximum bending power steel tube 35 x 2.5 mm - Excellent bending quality with very tight bending radii (from 2 x tube Ø) & Bending angles between 0 to 180 - Easy handling - High accuracy and reliability - Quick tool change (within a few seconds) - Easy to transport - A huge selection of inexpensive standard tools (metric, gas inch, inch) ** Bending segments available for an extra charge * STAHL bending segment R-82 G-1 "... 308 euros * SLIDING SHOE brass 1 "gas = 33.7mm ... 93 euros

Lagernummer:
1008-8362031
tube diameter:
33,7 x 3,4 GAS mm
tube diameter:
35,0 x 2,5 STAHL mm
bending radius min.:
R10 - R 190 mm
tube diameter:
35,0 x 1,5 EDELST mm
SIEGMUND MOBILER HUBTISCH 16er, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

MOBILER HUBTISCH 16er

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm

Lagernummer:
1008-8531699
table length:
1200 mm
table width:
800 mm
weight:
153 kg
GRAULE ZS 135 N, Metal Processing, Saws, Aluminium Circular Saw

GRAULE

ZS 135 N

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

- Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shift cut on one side up to 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 430 mm - Cutting height at 90 ° = 135 mm - Cutting length at 45 ° = 310 mm - Cutting height at 45 ° = 92 mm ** Special accessories included: - 1x HM circular saw blade 350 x 3.0 / 2.4 x 40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above, consisting of: 2 vertical clamping cylinders, adjustable with hand lever valve - machine stand

Lagernummer:
1008-8161010
saw blade diameter:
350 mm
cutting length:
430 mm
cutting diameter:
135 mm
turning speeds:
3.800 U/min
HM HBM 2000-45S man., Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

HM

HBM 2000-45S man.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Lagernummer:
1008-8355043
sheet width:
2035 mm
plate thickness:
4,5 mm ST
thickness at "Niro-steel":
3,0 mm VA
bending angle max.:
0 - 135 °
ERMAK SPEED BEND PRO 4.400, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.400

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308161
pressure:
400 t
chamfer lenght:
4100 mm
distance between columns:
3550 mm
column arm:
510 mm
FALKEN RS 1550 x 90, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RS 1550 x 90

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - Profile grooves: 4/6/9 mm

Lagernummer:
1008-8405562
sheet width:
1550 mm
plate thickness:
2,0 mm
roll length:
1550 mm
roll diam. toproll:
90,0 mm
MB PRO 1, Metal Processing, Welding machines, Rotary Welding Table

MB

PRO 1

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Lagernummer:
1008-845900
total power requirement:
230 Volt
table diameter:
300 mm
table load:
100 Horizontal kg
swivelling range:
0 - 90 Grad
ERMAK POWER BEND FALCON 3.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 3.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Lagernummer:
1008-8308047
pressure:
135 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
HM HBM 2500-45S man., Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

HM

HBM 2500-45S man.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Lagernummer:
1008-8355046
sheet width:
2540 mm
plate thickness:
4,5 mm ST
thickness at "Niro-steel":
3,0 mm VA
bending angle max.:
0 - 135 °
AK BEND APK 81, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 81

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - Hydraulically adjustable lateral straightening rollers - mobile control panel - 3 driven rollers - digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - Operating instructions in German Special accessories included in the price: - hydraulic side roller adjustment * Machine video: - https://www.youtube.com/watch?v=v_6jbaUpcmA

Lagernummer:
1008-840421
I-beam section - upend:
100 x 20 (d 2100) mm
bar material dia. max.:
100 x 3 (d 3000) mm
L-beam:
80x80x8 (d 2000) mm
square material:
50 x 25 x 2 (d 600) mm
MEP SHARK 332-1 CCS, Metal Processing, Saws, Band Saw

MEP

SHARK 332-1 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - autom. Saw bow lowering, with infinitely adjustable feed - Limit switch-off at the end of the cut - manual function - built-in coolant device - Large mounted turntable for miter cuts from 45 ° right - 60 ° left - saw band - Chip removal brush - Operating instructions in German

Lagernummer:
1008-8170057
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
ERMAK SPEED BEND PRO 3.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 3.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8308149
pressure:
220 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
GECAM EASY T, Other Metal Processing, Other machines, Deburring Machine

GECAM

EASY T

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Deburring Machine

The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Lagernummer:
1008-823118
diameter:
150 mm
workpiece length:
1300 mm
work piece width:
800 mm
max. dia. of grinding wheel:
150 mm
BERNARDO MASTER 180-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER 180-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - underframe - operating tool

Lagernummer:
1008-8203120
turning length:
1000 mm
turning diameter:
360 mm
turning dia. in gap:
480 mm
spindle bore:
51,0 mm
FEIN GRIT GIS 150, Metal Processing, Grinding machines, Belt Grinding Machine

FEIN

GRIT GIS 150

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Lagernummer:
1008-823821
width of the strips:
150 mm
band length:
2.000 mm
revolutions per minute:
3.000 U/min
engine output:
4,0 kW
FALKEN 4 R HMS 1550 x 150, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

FALKEN

4 R HMS 1550 x 150

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4-roll bending machine - separate control panel - hardened rolls SAE 1050 CK 45 - Conical bending device - 3 digital displays for exact roller positions - hydraulic folding storage

Lagernummer:
1008-8405521
sheet width:
1550 mm
plate thickness:
6,5 mm
pre-bending:
4,5 mm
diameter of upper rolls:
150 mm
ERMAK POWER BEND FALCON 1270x60S, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 1270x60S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Lagernummer:
1008-8303018
pressure:
60 t
chamfer lenght:
1270 mm
distance between columns:
1000 mm
column arm:
410 mm
A+B FASTECH FP 80, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switc

Lagernummer:
1008-8389014
pressure:
80 t
stroke:
285 mm
flat steel:
300 x 25 mm
working feed:
10,0 mm/sec
ERMAK POWER BEND FALCON 12.40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 12.40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8308135
pressure:
40 t
chamfer lenght:
1270 mm
distance between columns:
1050 mm
column arm:
350 mm
SIEGMUND 28, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531704
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
200 mm
weight:
981 kg
BERNARDO TITAN 560-1500 PRO, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 560-1500 PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Thread clock - Chip back wall - operating tool

Lagernummer:
1008-8203010
turning length:
1500 mm
turning diameter:
560 mm
turning diameter over slide:
350 mm
turning speeds:
25 - 1600 U/min
AK BEND AHS 20/06, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 20/06

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Lagernummer:
1008-8405572
sheet width:
2100 mm
plate thickness:
8,0 mm ST
pre-bending:
6,0 mm ST
diameter of upper rolls:
190 mm
GRAULE ZS 200 N, Metal Processing, Saws, Aluminium Circular Saw

GRAULE

ZS 200 N

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

- Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm ** Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Lagernummer:
1008-8164011
saw blade diameter:
520 x Ø 50 mm
cutting diameter:
200 mm
Cutting height at 45°:
140 mm
hole of sawblade:
50,0 mm
AK BEND ASM 140-12/5,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

ASM 140-12/5,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - 2 central rollers driven by an electric motor - Upper beam can be swiveled out - Conical bending device - foot switch - self-braking main engine - CE mark / declaration of conformity including special equipment: - Motorized rear roller adjustment - hardened rollers - digital display

Lagernummer:
1008-8400182
sheet width:
1250 mm
plate thickness:
5,5 mm
pre-bending:
5,0 mm
roll diam. toproll:
140 mm
ALZMETALL AX 3 iTRONIC-V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 iTRONIC-V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100654
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
BERNARDO SB 30 Profi, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

SB 30 Profi

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Lagernummer:
1008-8100269
bore capacity in steel (diameter):
32,0 mm
throat:
230 mm
bore stroke:
120 mm
morse taper:
3 MK
INDUSTRIEWERKBANK 2000, Tools and industrial equipment, Workshop equipment, Workbenches
Kategorie 1:
Tools and industrial equipment
Kategorie 2:
Workshop equipment
Kategorie 3:
Workbenches

Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available! *********************************

Lagernummer:
1008-980256
:
4 St.
:
2 St.
Plate thickness:
45 mm
table length:
2000 mm
A + B Kippcontainer Mod. 750 - BLAU, Other Accessories for Machine Tools, Other accessories for machine tools, Tilting Device

A + B Kippcontainer

Mod. 750 - BLAU

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Tilting Device

For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l ** available for a surcharge: - 2x fixed castors / 1x swivel castor .. 59.00 euros

Lagernummer:
1008-8802230
length:
0 mm
weight of the machine ca.:
ca. 200 kg.
BERNARDO SMART 410-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Revolving steady rest - passage diam. max. 65 mm - coolant device - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - slip clutch - Revolver stop with fine adjustment - Thread clock - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - Operating tool

Lagernummer:
1008-8203008
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
A + B Kippcontainer Mod. 750 - GRAU, Other Accessories for Machine Tools, Other accessories for machine tools, Tilting Device

A + B Kippcontainer

Mod. 750 - GRAU

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Tilting Device

For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l ** available for a surcharge: - 2x fixed castors / 1x swivel castor .. 59.00 euros

Lagernummer:
1008-8802232
length:
1500 x 740 x 780 innen mm
weight of the machine ca.:
ca. 200 kg.
A + B Kippcontainer Mod. 750 - GRUEN, Other Accessories for Machine Tools, Other accessories for machine tools, Tilting Device

A + B Kippcontainer

Mod. 750 - GRUEN

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Tilting Device

For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l ** available for a surcharge: - 2x fixed castors / 1x swivel castor .. 59.00 euros

Lagernummer:
1008-8802231
length:
1500 x 740 x 780 innen mm
weight of the machine ca.:
ca. 200 kg.
BERNARDO MASTER PRO 360, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER PRO 360

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 60 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 280 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool

Lagernummer:
1008-8203096
turning length:
1000 mm
turning diameter:
360 mm
swing diameter over bed slide:
220 mm
turning dia. in gap:
502 mm
BERNARDO Standard 165 V-D, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

Standard 165 V-D

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve - change gears - 2 center points - underframe - operating tool

Lagernummer:
1008-8203140
turning length:
1000 mm
turning diameter:
350 mm
turning dia. in gap:
450 mm
spindle bore:
40,0 mm
FALKEN DPM 1040-80, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1040-80

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - hydraulic workshop press - Table height adjustment - V-block tool insert - Pressure gauge

Lagernummer:
1008-8371062
pressure:
80 t
stroke:
250 mm
table surface area:
1040 x 260 mm
column travel between the guideways:
1040 mm
ERMAK ECO BEND EXPERT 37.160, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 37.160

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Lagernummer:
1008-8308084
pressure:
160 t
chamfer lenght:
3760 mm
distance between columns:
3250 mm
column arm:
250 mm
A+B Tool 3, Woodworking, Handling, Cupboard with drawers

A+B

Tool 3

Kategorie 1:
Woodworking
Kategorie 2:
Handling
Kategorie 3:
Cupboard with drawers

Furnishing: - Tool cabinet for folding tools - with 3 drawers - suitable for SYSTEM A - Colour blue

Lagernummer:
1008-8802552
length:
1.104 mm
width:
696 mm
height:
1.037 mm
weight:
240 kg
BERNARDO B 1050 BOX, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

B 1050 BOX

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

characteristics - Universally applicable bending machines for plumbing and repair shops - Simple pivoting movement of the bending beam using a bow handle - Easy adjustment of the upper beam for efficient work - High upper beam for producing high-edged profiles - The piano inserts in the upper, lower and bending beam result in a large number of bending options - Cassettes and special profiles with opposite bends are with these Models easily feasible Scope of delivery : - Segmented upper, lower and bending beam - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm

Lagernummer:
1008-8350400
sheet width:
1050 mm
plate thickness:
1,0 mm
daylight opening:
95 mm
angle adjustable from - to:
0 - 150 Grad
ERMAK ECO BEND EXPERT 3.160, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 3.160

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes

Lagernummer:
1008-8308097
pressure:
160 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
250 mm
SIEGMUND 16, PROF 750 2000x1000 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROF 750 2000x1000 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Lagernummer:
1008-8531696
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
354 kg
SIEGMUND 16, PROFESSIONAL 750 3000x1500, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL 750 3000x1500

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment

Lagernummer:
1008-8532084
table length:
3000 mm
table width:
1500 mm
table height (lateral area):
100 mm
weight:
726 kg
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Lagernummer:
1008-8531664
table length:
3000 mm
table width:
1500 mm
table height (lateral area):
100 mm
weight:
753 kg
SIEGMUND MOBILER HUBTISCH 28er, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

MOBILER HUBTISCH 28er

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm

Lagernummer:
1008-8531700
table length:
1200 mm
table width:
800 mm
weight:
177 kg
FMS PF - 30 P, Metal Processing, Presses, Eccentric Press - Single Column

FMS

PF - 30 P

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Eccentric Press - Single Column

Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Lagernummer:
1008-8371041
pressure:
30 t
throat:
200 mm
stroke:
0 - 60 mm
table::
400 x 600 mm
SIEGMUND 16, PROF 750 2400x1200 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROF 750 2400x1200 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Lagernummer:
1008-8531695
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
100 mm
weight:
537 kg
BERNARDO TITAN 660 - 2000, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 660 - 2000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - change gears - reducing sleeve - Chip back wall - Cable routing via energy chain - operating tool

Lagernummer:
1008-8203006
turning length:
2000 mm
centre height:
330 mm
swing diameter over bed slide:
660 mm
swing diameter over slide rest:
460 mm
BOGE SOLIDdrive 240 oelfrei, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDdrive 240 oelfrei

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price 330 euros Description : the clean one for oil-free professional use in craft and small industry Proven oil-free compressor technology Low maintenance

Lagernummer:
1008-8486001
feed pressure:
8,0 bar
intake capacity:
240 L/min
Effective free air delivery:
140 L/min
Receiver capacity:
24 Ltr.
BOGE SOLIDdrive 850, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDdrive 850

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 1,770 euros Furnishing: - mobile piston compressor - 2-stage, belt-driven high-performance compressor - completely ready for connection with cable and plug - large wheels and sturdy castors - Low speed

Lagernummer:
1008-8486004
feed pressure:
10 bar
intake capacity:
850 L/min
Effective free air delivery:
650 L/min
container volume:
90 Ltr.
SIEGMUND 28, EXTREME 8.7 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, EXTREME 8.7 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Lagernummer:
1008-8531694
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
200 mm
weight:
1069 kg
A+B FASTECH MAX 40, Metal Processing, Sheet metal working / shaeres / bending, Reinforced Steel - Bending Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Reinforced Steel - Bending Machine

Furnishing : - Maximum performance, minimum consumption - hydraulic combined machine for bending and cutting operations * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - Manual and automatic mode selectable - simultaneous bending and cutting operations When the machine is running, - - "ECO mode" = hydraulic pump only runs when the foot switch is actuated - free-moving footswitch - Operation manual Technical specifications : - Steel 45 kg / mm² .. Bend Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bend Ø 20.0 mm / cutting Ø 24.0 mm - Steel 65 kg / mm² .. bend Ø 32.0 mm / cutting Ø 32.0 mm * for 2x pieces - steel 65 kg / mm² .. bend Ø 18.0 mm / cutting Ø 20.0 mm - Steel 85 kg / mm² .. Bend Ø 26.0 mm / cutting Ø 28.0 mm * for 2x pieces - steel 85 kg / mm² .. bend Ø 14.0 mm / cutting Ø 18.0 mm

Lagernummer:
1008-8389015
bending diam. - max.:
36,0 mm ST
cutting thickness max.:
36,0 mm ST
motor:
1450 U/min
oil volume:
32,0 l
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531652
table length:
1500 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
255 kg
BERNARDO SOLID 460-1500 Vario Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SOLID 460-1500 Vario Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Fixed bezel - passage diam. max. 150 mm - Live steady rest - passage diam. max. 110 mm - First filling with Shell Tellus 46 - clamping disc 350 mm - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - Foot pedal with brake function according to CE - coolant device - Frequency converter - slip clutch - change gears - reducing sleeve - 2 center points - Thread clock - LED machine light - Chip back wall - operating tool

Lagernummer:
1008-8203098
turning length:
1500 mm
turning diameter:
460 mm
swing diameter over bed slide:
274 mm
turning dia. in gap:
690 mm
SIEGMUND 28, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531657
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
200 mm
weight:
699 kg
SIEGMUND 28 / SONDERSET / 96 tlg., Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28 / SONDERSET / 96 tlg.

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

Description : - Special set for SIEGMUND 28 clamping tables included : - 1x tool trolley - 30x quick release bolts with twist lock short - 8x universal stoppers 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angle 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping bracket 750 G left - nitrided - 1x stop and clamping bracket 750 G right - nitrided - 1x stop and clamping bracket 500 G left - nitrided - 1x stop and clamping bracket 500 G right - nitrided - 4x stop and clamping angle 300 G left - nitrided - 8x prism Ø60-135 ° burnished - 16x Professional screw clamps - nitrided - 6x Professional screw clamp 45 ° / 90 ° - nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: - Eccentric, Allen key, brush, whetstone - Probe CleanBasic, Probe non-stick and torch holder

Lagernummer:
1008-8531702
table length:
unterschiedlich mm
table width:
unterschiedlich mm
table height (lateral area):
unterschiedlich mm
weight:
ca. 240 kg
BERNARDO TBS 2060, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TBS 2060

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

- Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Lagernummer:
1008-8355078
sheet width:
2065 mm
plate thickness:
1,20 mm
daylight opening:
mit WZ 35,0 mm
daylight opening:
ohne WZ 60,0 mm
JAECKLE PLASMA 60, Metal Processing, Welding machines, Plasma Cutting Device

JAECKLE

PLASMA 60

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Description: - Plasma gas: compressed air - Plasma torch with single connection - high frequency ignition - thermal overload protection - very robust and reliable design - The plasma cutting device JÄCKLE Plasma 60 shines with a very good Price-performance ratio. - This plasma cutter is the ideal system for craft, agriculture, Automotive industry etc .; Furnishing: - with burner model P 70/6 mtr.

Lagernummer:
1008-8455053
cutting range for steel to:
20,0 Trennschnitt mm
cutting range for steel to:
15,0 Qualitätsschnitt mm
capacity at 100%:
60 A
cutting medium:
Druckluft
MEP TIGER 352 - 4 Geschw., Metal Processing, Saws, Cold Circular Saw

MEP

TIGER 352 - 4 Geschw.

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The large turntable with internal table clamp & Precision stops at 0/45/60 ° ensure quick adjustability on miter cuts - The quick-release vice is also screwed on Vise jaws provided. - With their corrugation, these ensure an optimal hold of the workpiece - Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded views - Crane eyes for transport * The machine is delivered without a saw blade

Lagernummer:
1008-8160040
saw blade diameter:
350 x 32 mm
capacity 45 degrees: round:
110 mm
capacity 60 degrees: round:
90,0 mm
capacity 90 degrees: square:
95,0 mm
ALZMETALL ALZSTAR 40 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 40 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Lagernummer:
1008-8100335
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
BERG & SCHMID - Vollautomat GBS 305 VA-I CNC, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Lagernummer:
1008-8174061
cutting diameter:
305 mm
capacity 90 degrees: flat:
350 x 200 mm
capacity 90 degrees: square:
260 mm
capacity 45 degrees: flat:
230 x 200 mm
AK BEND AKM 400 hydr., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 400 hydr.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing: - Hydraulic adjustment - 3 sets of rollers - Double seams, beads, flanging rollers - Double foot switch - Operating instructions in German - CE marking / declaration of conformity

Lagernummer:
1008-8470420
plate thickness:
4,0 mm
throat:
260 mm
distance between roll centers:
132 mm
stroke:
55 Oberwalze mm
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Lagernummer:
1008-8531662
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
100 mm
weight:
499 kg
MEP - Halbautomat SHARK 282 SXI - Evo / MDE, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 282 SXI - Evo / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - optionally manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick

Lagernummer:
1008-8174116
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: flat:
220 x 200 mm
ALZMETALL ALZSTAR 23/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 23/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Lagernummer:
1008-8100360
bore capacity in steel (diameter):
23,0 mm
throat:
250 mm
bore stroke:
100 mm
morse taper:
2 MK
SIEGMUND 16, Professional 750 2000x1000, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, Professional 750 2000x1000

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment

Lagernummer:
1008-8531692
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
354 kg
ALZMETALL AX 4 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 4 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

Lagernummer:
1008-8100382
bore capacity in steel (diameter):
55,0 mm
throat:
300 mm
bore stroke:
120 mm
threading:
M 36 in St 60
SIEGMUND 16, Professional 750 2400x1200, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, Professional 750 2400x1200

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Lagernummer:
1008-8531691
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
100 mm
weight:
466 kg
ALZMETALL AX 3 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Lagernummer:
1008-8100381
bore capacity in steel (diameter):
40,0 mm
threading:
M 24 in St 60
throat:
293 mm
bore stroke:
120 mm
ALZMETALL AB 34 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 34 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Lagernummer:
1008-8100320
bore capacity in steel (diameter):
34,0 mm
throat:
300 mm
bore stroke:
160 mm
morse taper:
4 MK
ALZMETALL ALZSTAR 30 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 30 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Lagernummer:
1008-8100652
bore capacity in steel (diameter):
30,0 mm
throat:
293 mm
bore stroke:
140 mm
morse taper:
3 MK
ERMAK ECO BEND EXPERT 26.80, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 26.80

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Lagernummer:
1008-8308093
pressure:
80 t
chamfer lenght:
2600 mm
distance between columns:
2200 mm
column arm:
250 mm
ALZMETALL ALZSTAR 30/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 30/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

Lagernummer:
1008-810036
bore capacity in steel (diameter):
30,0 mm
throat:
293 mm
bore stroke:
140 mm
morse taper:
3 MK
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531663
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
351 kg
ALZMETALL AB 50 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 50 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Lagernummer:
1008-810039
bore capacity in steel (diameter):
50,0 mm
throat:
350 mm
bore stroke:
200 mm
threading:
M 42 in St 60
BOGE SOLIDdrive 600, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDdrive 600

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 1.400 euros Furnishing: - mobile piston compressor - 2-stage, belt-driven high-performance compressor - completely ready for connection with cable and plug - large wheels and sturdy castors - Low speed

Lagernummer:
1008-8486003
feed pressure:
10 bar
intake capacity:
600 L/min
Effective free air delivery:
450 L/min
container volume:
90 Ltr.
FALKEN HNM-6 F, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

FALKEN

HNM-6 F

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - hydraulic 90 ° notching machine - Jog mode for setting the scissor knives - 2x stop rulers - front / removable collecting tray - Foot switch, with EMERGENCY OFF function

Lagernummer:
1008-8392011
plate thickness:
6,5 mm
thickness at "Niro-steel":
3,0 mm
blade length:
250 x 250 mm
motor:
400 Volt 50 Hz
GRAULE ZS 170 N, Metal Processing, Saws, Aluminium Circular Saw

GRAULE

ZS 170 N

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

- Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm ** Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Lagernummer:
1008-8162010
saw blade diameter:
410 mm
cutting diameter:
170 mm
turning speeds:
3.500 U/min
Dust suction hood:
100 mm
ERMAK CNC - HGS 2600-8, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC - HGS 2600-8

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321020
sheet width:
2600 mm
plate thickness:
8,0 mm
thickness at "Niro-steel":
5,0 mm
down holder:
12 Stück
FALKEN SLB 5 to. / 500 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 5 to. / 500 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg

Lagernummer:
1008-8801025
0:
5.000 kg
height:
500 mm
width:
1200 mm
MEP - Halbautomat SHARK 332-1 SXI evo / MDE, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 332-1 SXI evo / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

Lagernummer:
1008-8174117
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
FALKEN SLB 5 to. / 800 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 5 to. / 800 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg

Lagernummer:
1008-8801024
0:
5.000 kg
height:
800 mm
width:
1200 mm
BERNARDO TB 2060, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 2060

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

- Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Lagernummer:
1008-8355079
sheet width:
2065 mm
plate thickness:
1,20 mm
daylight opening:
30,0 mm
bending angle max.:
0 - 135 °
FALKEN SLB 2 to. / 800 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 2 to. / 800 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg

Lagernummer:
1008-8801026
0:
2.000 kg
height:
800 mm
width:
1200 mm
BERNARDO SOLID 460-1500 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SOLID 460-1500 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - clamping disc 350 mm - coolant device - First filling with Shell Tellus 46 - Fixed bezel - passage diam. max. 150 mm - Live steady rest - passage diam. max. 110 mm - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - slip clutch - change gears - 2 center points - reducing sleeve - Thread clock - LED machine light - Chip back wall - operating tool

Lagernummer:
1008-8203130
turning length:
1500 mm
turning diameter:
460 mm
swing diameter over bed slide:
274 mm
turning dia. in gap:
690 mm
FALKEN SLB 15 to. / 1350 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 15 to. / 1350 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm

Lagernummer:
1008-8801023
0:
15.000 kg
height:
790-1350 mm
width:
1200 mm
weight:
~ 65,0 kg
BERNARDO RD 1250x50, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

BERNARDO

RD 1250x50

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Lagernummer:
1008-8110014
bore capacity in steel (diameter):
50,0 mm
arm length:
320 - 1.220 mm
workpiece height max.:
330 - 1.170 mm
turning speeds:
25 - 2000 U/min
BERNARDO HLS 1050 x 2,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

BERNARDO

HLS 1050 x 2,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

- Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Lagernummer:
1008-8328115
sheet width:
1050 mm
plate thickness:
2,0 mm
distance between columns:
1050 mm
down holder:
1 Stück
MEP SHARK PH 262 HB, Metal Processing, Saws, Band Saw

MEP

SHARK PH 262 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Compact, manual, powerful workshop double miter band saw - for cuts from 45 ° right to 60 ° left - hydraulic, stepless lowering of the saw bow - coolant device - hydr. Lowering from the saw frame - autom. Limit switch-off - saw band - workpiece stop - Operating instructions in German

Lagernummer:
1008-8174063
cutting diameter:
225 mm
capacity 90 degrees: flat:
245 x 150 mm
capacity 90 degrees: square:
200 x 200 mm
capacity 45 degrees: flat:
160 x 140 mm
BERNARDO SB 4, Other Machines, Other attachments, Sandblasting Machine
Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Working space: 1110 x 820 x 810 mm LxWxH - very stable construction - Jet head (grain size 0.149 - 0.250 mm can be used) - Container for blasting material - dust extraction - foot switch - Lighting in the work area - Operating instructions in German - Transport dimensions / packed: 1350 x 1000 x 1100 mm

Lagernummer:
1008-8809010
through-put width:
820 mm
working heigth:
810 mm
Air consumption:
680 l/min.
air pressure:
8,6 bar
BERNARDO SB 3, Other Machines, Other attachments, Sandblasting Machine
Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Working space: 1220 x 615 x 580 mm LxWxH - Jet head (grain size 0.149 - 0.250 mm can be used) - Container for blasting material - dust extraction - foot switch - Lighting in the work area - Operating instructions in German

Lagernummer:
1008-8809009
through-put width:
580 mm
working heigth:
615 mm
discs:
570 x 260 mm
Air consumption:
400 l/min.
BERNARDO EBS 100 C, Metal Processing, Saws, Band Saw

BERNARDO

EBS 100 C

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector

Lagernummer:
1008-8174109
capacity 90 degrees: round:
100 mm
capacity 45 degrees: round:
65,0 mm
capacity 90 degrees: flat:
100 x 150 mm
capacity 45 degrees: flat:
60 x 100 mm
A+B ERBEND UFA 1015, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

A+B ERBEND

UFA 1015

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Split upper, lower and rear tool - Height of the upper tool = 100 mm * Division 100/100/100/100/100/100/100/70/60/50/40/30/100 * left + right with horn tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual back gauge 500 mm - mobile

Lagernummer:
1008-8355056
sheet width:
1050 mm
plate thickness:
1,5 mm
daylight opening:
100 mm
bending angle max.:
135 °
PEDDINGHAUS Hydraulic 280, Metal Processing, Stamping press, Punching Press

PEDDINGHAUS

Hydraulic 280

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

Furnishing: - Quick-change punch device up to Ø 31 mm - green series - - built-in: round punch no.5 Ø 25.0 mm and round die no.3 Ø 25.7 mm - Free: LED lighting in the punching area - swiveling scraper (plates exchangeable) - Various material support tables are available separately - support frame - 2-step foot switch, with double press for grain search function - electrical controls - Infinitely adjustable stroke length and stroke position - Integrated hydraulic unit with oil filling - Performance data apply to a material strength of 450 N / mm²

Lagernummer:
1008-8412009
punching pressure:
28 t
punching cross-cut in cmm:
31 in 7 mm
round bar steel:
32,0 mm
throat:
250 mm
BOGE SOLIDdrive 380 WS, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

SOLIDdrive 380 WS

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Special price / on request ** List price: 700 euros The robust one for the professional Craft and industrial company. Furnishing: - mobile piston compressor - completely ready for connection with cable and plug - low speed Executions: * WS - 230 volts

Lagernummer:
1008-8489033
feed pressure:
10 bar
intake capacity:
380 L/min
Effective free air delivery:
248 L/min
container volume:
50 Ltr.
FALKEN CKL 2020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FALKEN

CKL 2020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

- Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam - Foot clamp - Fixed stop for angle adjustment

Lagernummer:
1008-8355077
sheet width:
2020 mm
plate thickness:
2,0 mm
daylight opening:
122 mm
bending angle max.:
0 - 135 °
AK BEND ASM 140-20/4, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

ASM 140-20/4

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - Upper and lower roller electr. driven - Upper roller can be swiveled out - Conical bending device - Asymmetrical roller arrangement - self-braking main engine - separate control and operating panel - Safety line - foot switch - Operating instructions in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital display

Lagernummer:
1008-8400093
sheet width:
2050 mm
plate thickness:
4,5 mm max.
plate thickness:
4,0 mm anbiegen
roll length:
2050 mm
RAGNAR HYDR 5-36, Metal Processing, Threading machines, Thread-Cutting Machine

RAGNAR

HYDR 5-36

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Furnishing: - hydraulic threading machine - Including machine base with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36

Lagernummer:
1008-8104208
thread dia.:
bis M 36 M
turning speeds:
0-100 U/min
thread:
M5 - M36 M
working area:
2050 Rmax.
AK BEND AKM 250 motor., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 250 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing: - 3 sets of rollers - motor-driven beading machine - foot switch - Operating instructions in German - CE mark / declaration of conformity

Lagernummer:
1008-8470411
plate thickness:
2,5 mm
throat:
260 mm
distance between roll centers:
92 mm
weight:
295 kg
A+B FASTECH FP 20, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Stepless adjustment of speed / pressing force - Double foot switch

Lagernummer:
1008-8389012
pressure:
20 t
stroke:
185 mm
flat steel:
200 x 12 mm
working feed:
10,0 mm/sec
FALKEN SLB 2 to. / 500 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 2 to. / 500 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg

Lagernummer:
1008-8801027
0:
2.000 kg
height:
500 mm
width:
1200 mm
BERNARDO TITAN 660-3000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 660-3000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - change gears - reducing sleeve - Chip back wall - Cable routing via energy chain - operating tool

Lagernummer:
1008-8203100
turning length:
3000 mm
turning diameter:
660 mm
turning dia. in gap:
900 mm
turning diameter over slide:
460 mm
AK BEND APK 101, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 101

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - hydr. Roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard set of rollers, hardened - Hydraulically adjustable lateral straightening rollers - mobile control panel - 3 driven rollers - digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - Operating instructions in German Special accessories included in the price: - hydraulic side roller adjustment

Lagernummer:
1008-8405559
I-beam section - upend:
120 x 25 (d 1600) mm
bar material dia. max.:
140 x 3 (d 3000) mm
L-beam:
100x100x10 (d 1600) mm
square material:
140 x 40 x 3 (d 4000) mm
BERNARDO SB 40 Profi, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

SB 40 Profi

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sleeve MK 4/3, MK 4/2, MK 3/1 - LED machine light - Automatic tool ejector - Height-adjustable protective cover

Lagernummer:
1008-8100277
bore capacity in steel (diameter):
40,0 mm
throat:
320 mm
bore stroke:
160 mm
morse taper:
4 MK
MEP - Vollautomat SHARK 331-1 NC 5.0 Spider, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 331-1 NC 5.0 Spider

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows “CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feeder with protective cover and safety limit switch - Positioning of the saw head and movement of the feeder using the joystick - Automatic recognition of the start of the cut - Electronic strap tension control - Automatic monitoring of the cutting load - Removable coolant pan * (equipped with 2 electric pumps for lubrication and cooling of the saw band) - Instructions DE

Lagernummer:
1008-8174064
cutting range:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: round:
260 mm
BERNARDO GB 35 Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 35 Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Lagernummer:
1008-8100264
bore capacity in steel (diameter):
35,0 mm
bore capacity in cast iron:
40,0 mm
throat:
320 mm
threading:
M 24 in Stahl
AK BEND AHS 40/10, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 40/10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity

Lagernummer:
1008-8405568
sheet width:
4100 mm
plate thickness:
13,0 mm ST
pre-bending:
10,0 mm ST
diameter of upper rolls:
360 mm
FALKEN RM 1550 x 90 motor., Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RM 1550 x 90 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device

Lagernummer:
1008-8405557
sheet width:
1550 mm
plate thickness:
2,0 mm
roll diam. toproll:
90,0 mm
engine output:
1,5 kW
BERNARDO BM 25 T - 400, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

BERNARDO

BM 25 T - 400

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Lagernummer:
1008-8092704
bore capacity in steel (diameter):
25,0 mm
throat:
180 mm
bore stroke:
80 mm
morse taper:
2 MK
A + B HU Tap AT-20/II, Metal Processing, Threading machines, Thread-Cutting Machine

A + B

HU Tap AT-20/II

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Lagernummer:
1008-8100031
thread dia.:
20 M
turning speeds:
400 U/min
thread:
M 4 - M 20 M
working area:
1900 Rmax.
FALKEN HNM-6 VP / COMBI, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

FALKEN

HNM-6 VP / COMBI

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - in accordance with EC safety guidelines and with CE marking - hydraulic corner notcher HNM-6 V with variable angle - as well as 2nd work station: hole punching device * 25 to. Pressing force (150 bar) * Stroke = 37.0 mm * Tool system: Haco Kingsland * 130 mm projection - autom. Kerf adjustment

Lagernummer:
1008-8392022
plate thickness:
6,0 mm
thickness at "Niro-steel":
3,0 mm
angle adjustable from - to:
30 - 140 Grad
blade length:
200 x 200 mm
BERNARDO AK 130 P, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

AK 130 P

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe

Lagernummer:
1008-8390115
:
3,0 mm ST 40
:
2,0 mm VA
:
90° Grad
blade length:
130 x 130 mm
MB POS-1TW, Metal Processing, Welding machines, Rotary Welding Table

MB

POS-1TW

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Lagernummer:
1008-845905
table diameter:
900 mm
table load:
1.000 kg
turning speeds:
0,12 - 1,2 U/min
swivelling range:
0 - 135 Grad
FALKEN DPM 1040-60, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1040-60

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - hydraulic workshop press - Table height adjustment - V-block tool insert - Pressure gauge

Lagernummer:
1008-8371061
pressure:
60 t
stroke:
250 mm
table surface area:
1040 x 370 (315) mm
column travel between the guideways:
1040 mm
A+B BDV 1,0 T, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

BDV 1,0 T

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control (3 meters) to set the speed and right / Counterclockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Lagernummer:
1008-8458503
weight max.:
1000 kg
table turning speeds:
180 - 1800 mm/min.
roll diameter:
200 x 50 mm
workpiece diameter:
50 - 1500 mm
A+B BDV 3,0 T, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

BDV 3,0 T

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control for setting the speed and clockwise - counter clockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Lagernummer:
1008-8458501
weight max.:
3000 kg.
table turning speeds:
120 - 1200 mm/min.
roll diameter:
250 x 75 mm
workpiece diameter:
150 - 2000 mm
BERNARDO MS 150 x 2000 S-2, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 150 x 2000 S-2

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823806
width of the strips:
150 mm
band length:
2000 mm
band speed:
14,5 / 29 m/sec
grinding width:
460 x 150 Plantisch mm
ALZMETALL AB 34 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 34 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Lagernummer:
1008-8100656
bore capacity in steel (diameter):
34,0 mm
throat:
300 mm
bore stroke:
160 mm
morse taper:
4 MK
ALZMETALL AX 4 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 4 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Lagernummer:
1008-8100655
bore capacity in steel (diameter):
55,0 mm
throat:
300 mm
bore stroke:
140 mm
morse taper:
4 MK
UNICRAFT SHT 1000, Other Machines, Other attachments, Lift table

UNICRAFT

SHT 1000

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Lift table

Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Lagernummer:
1008-8531613
weight max. in kg:
1000 kg
table width:
800 mm
stroke height:
190-1010 mm
table length:
1300 mm
SIEGMUND 28, PROF 750 3000x1500 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROF 750 3000x1500 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Lagernummer:
1008-8531693
table length:
3000 mm
table width:
1500 mm
table height:
850 mm
side-clamping surface::
200 (Höhe) mm
SIEGMUND 28, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment

Lagernummer:
1008-8531656
table length:
3000 mm
table width:
1500 mm
table height (lateral area):
200 mm
weight:
1374 kg
FLOTT BSM 150 A, Metal Processing, Grinding machines, Belt Grinding Machine

FLOTT

BSM 150 A

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Lagernummer:
1008-823839
width of the strips:
150 mm
band length:
2000 mm
band speed:
30,0 mm/sek
grinding width:
500 Plantisch mm
FLOTT BSM 75 A, Metal Processing, Grinding machines, Belt Grinding Machine

FLOTT

BSM 75 A

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Lagernummer:
1008-823838
width of the strips:
75 mm
band length:
2000 mm
band speed:
30,0 mm/sek
grinding width:
500 Plantisch mm
ERMAK HVR CNC 3100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

HVR CNC 3100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8328113
sheet width:
3100 mm
plate thickness:
6,0 mm
distance between columns:
3.100 mm
down holder:
14 Stück
MEP Cobra 352 MA 2G, Metal Processing, Saws, Aluminium Circular Saw

MEP

Cobra 352 MA 2G

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Special accessories: - including base

Lagernummer:
1008-816001
saw blade diameter:
350 x 32 mm
capacity 90 degrees: round:
120 mm
capacity 90 degrees: square:
105 mm
capacity 90 degrees: flat:
180 x 70 mm
ERMAK POWER BEND FALCON 3.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 3.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Lagernummer:
1008-8303219
pressure:
175 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
A + B HU Tap AT-12/II, Metal Processing, Threading machines, Thread-Cutting Machine

A + B

HU Tap AT-12/II

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Lagernummer:
1008-8101012
thread dia.:
12 M max.
turning speeds:
400 U/min
thread:
M 3 - M 12 M
working area:
1600 R max.
IBARMIA IBERDRILL B 60, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IBARMIA

IBERDRILL B 60

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Lagernummer:
1008-8104210
Boring power:
60,0 mm
bore capacity in cast iron:
70,0 mm
bore stroke:
260 mm
thread dia.:
bis M 42 M
A+B ERBEND UFA 1212, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

A+B ERBEND

UFA 1212

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Split upper, lower and rear tool - Height of the upper tool = 100 mm * Division 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * left + right with horn tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual back gauge 500 mm - mobile

Lagernummer:
1008-8355057
sheet width:
1250 mm
plate width at 30 kg/mm:
2,0 mm ALU
plate thickness:
1,25 mm ST
thickness at "Niro-steel":
0,8 mm VA
FEIN GRIT GX 75, Metal Processing, Grinding machines, Belt Grinding Machine

FEIN

GRIT GX 75

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Lagernummer:
1008-823104
width of the strips:
75,0 mm
band length:
2.000 mm
band speed:
30 m/sec
grinding width:
75 x 430 mm
OMCN Mod. 153, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 153

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - hydraulic workshop press - 2-way valve with autom. Piston retraction - Two-stage descent speed - Height adjustable table - Operating instructions in German

Lagernummer:
1008-8370049
pressure:
10,0 t
stroke:
190 mm
table surface area:
520 x 120 mm
dayligth:
350 mm
MEP SHARK 281 CCS / MDE, Metal Processing, Saws, Band Saw

MEP

SHARK 281 CCS / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw machine for cuts from 0 - 60 ° left - Quick-release vice - How manual or automatic cut works - with stepless hydr. Feed adjustment - hydraulic saw band tension - Saw band 2,950 x 27 x 0.9 mm - electrical coolant device - Angle stop - Chip removal brush - Operating instructions in German ** Special accessories included: - 1x LUBE Cut microdosing device

Lagernummer:
1008-8174084
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 200 mm
capacity 90 degrees: square:
230 x 230 mm
capacity 45 degrees: round:
190 mm
SIMASV T40 Super, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal

SIMASV

T40 Super

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Lagernummer:
1008-8389011
pressure:
40 t
stroke:
250 mm
flat steel:
120 x 25 mm
working feed:
8,0 mm/sec
ABUS Säulenschwenkkran LS, Other Machines, Other attachments, Pillar Type Swivelling Crane

ABUS

Säulenschwenkkran LS

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Pillar Type Swivelling Crane

Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED ** Fig. Shows a similar crane system

Lagernummer:
1008-8531778
weight max. in kg:
250 kg
arm length:
4000 mm
height:
3425 Unterkante Ausleger
total column height:
4.025 mm
ERMAK FIBERMAK SM 6000.4 x 2, Metal Processing, Sheet metal working / shaeres / bending, Laser Cutting Machine

ERMAK

FIBERMAK SM 6000.4 x 2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Laser Cutting Machine

Lagernummer:
1008-8423124
table length:
4000 mm
table width:
2000 mm
burner heads:
Precitec Procutter
x-axis:
4050 mm
SIMASV AF 226/B, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

SIMASV

AF 226/B

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Lagernummer:
1008-8390118
:
6,0 mm ST 40
:
4,5 mm VA
blade length:
220 x 220 mm
stroke speed:
45 m/min
ABUS Säulenschwenkkran LS, Other Machines, Other attachments, Pillar Type Swivelling Crane

ABUS

Säulenschwenkkran LS

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Pillar Type Swivelling Crane

Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. ** Fig. Shows a similar crane system

Lagernummer:
1008-8531889
weight max. in kg:
500 kg
arm length:
4000 mm
height:
3425 Unterkante Ausleger
total column height:
4215 mm
OMCN Mod. 162 W, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 162 W

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - electro-hydraulic press with manometer - 2 speeds - high pressure unit - Regulating and 3-way valve: * Feed - idle - reverse - The receiving table can be adjusted by a winch - Piston made of tempered and chrome-plated special steel - Required instructions

Lagernummer:
1008-8370051
pressure:
50 t
stroke:
260 mm
dayligth:
1135 mm
stroke speed:
215 mm/min
ABUS Säulenschwenkkran LS, Other Machines, Other attachments, Pillar Type Swivelling Crane

ABUS

Säulenschwenkkran LS

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Pillar Type Swivelling Crane

Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. ** Fig. Shows a similar crane system

Lagernummer:
1008-8531890
weight max. in kg:
1000 kg
arm length:
4000 mm
height:
3000 Unterkante Ausleger
total column height:
3790 mm
OMCN Mod. 164 R / 022 - A, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 164 R / 022 - A

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - with adjustable cylinder - 2 speeds: * 1,600 mm / min feed speed * 180 mm / min. Working speed - Electro-hydraulic press with pressure gauge - Overdrive hydraulic unit - Regulating and three-way valve: * Forward-idle-reverse - Shooting table, adjustable with a screw-in lifting rod - Operating instructions in German

Lagernummer:
1008-8370052
pressure:
100 t
stroke:
310 mm
table surface area:
340 x 1010 mm
dayligth:
1055 mm
OMCN Mod. 164 W, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 164 W

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - motor-driven hydraulic workshop press - 2 speeds * Infeed speed 595 mm / min. * Working speed 260 mm / min. - High pressure unit with manometer - Regulating and 3-way valve: feed-idle-return - The receiving table can be adjusted by a winch - Piston made of tempered and chrome-plated special steel - Operating instructions in German

Lagernummer:
1008-8370056
pressure:
100 t
stroke:
310 mm
table surface area:
285 x 1010 mm
dayligth:
1055 mm
PANTHER 75/1/4, Metal Processing, Grinding machines, Belt Grinding Machine

PANTHER

75/1/4

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Lagernummer:
1008-8231500
width of the strips:
75 mm
band length:
2.000 mm
band speed:
33 m/sec
grinding width:
75 x 430 mm
MB ECO-S300, Metal Processing, Welding machines, Rotary Welding Table

MB

ECO-S300

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Lagernummer:
1008-8459011
table diameter:
500 mm
table load:
300 horizontal kg.
table load:
150 vertikal kg.
swivelling range:
0 - 90 Grad
HM TAS 150 X, Metal Processing, Grinding machines, Belt Grinding Machine

HM

TAS 150 X

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - integrated suction - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful motor 4.0 kW - suction nozzle ** including: integrated suction **

Lagernummer:
1008-823831
width of the strips:
150 mm
band length:
2000 mm
band speed:
34,0 mm/sek
grinding width:
530 Plantisch mm
A+B ERBEND MFC 3215, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

A+B ERBEND

MFC 3215

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

techn. Data : - Sheet width 3.200 mm - Sheet metal thickness 1.50 mm steel - Sheet thickness 2.0 mm ALU - Sheet thickness 1.0 mm stainless steel - Lower beam adjustment 35 mm Furnishing : - electric / motorized swivel bending machine - with 15.6 "NC touchscreen control for upper beam / bending beam / backgauge - electrical backgauge / support table - manual lower beam adjustment (35 mm) - Double foot switch - Upper tool / bending rail Special accessories included: - electrical backgauge 10 - 750 mm - large material support table with ball casters

Lagernummer:
1008-8355067
sheet width:
3200 mm
plate thickness:
1,50 mm
daylight opening:
120 mm
back stop - adjustable:
10 - 750 mm
ALZMETALL AB 40 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 40 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Lagernummer:
1008-8100400
bore capacity in steel (diameter):
40,0 mm
throat:
300 mm
bore stroke:
160 mm
threading:
M30 in St 60
FMS PF - 10 P, Metal Processing, Presses, Eccentric Press - Single Column

FMS

PF - 10 P

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Eccentric Press - Single Column

Lagernummer:
1008-8371040
pressure:
10 t
throat:
160 mm
stroke:
0 - 40 mm
table::
270 x 370 mm
BERNARDO DS 250 S, Metal Processing, Grinding machines, Double spindle mounted in journals

BERNARDO

DS 250 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Double spindle mounted in journals

scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Lagernummer:
1008-8232020
grinding width:
32 mm
max. dia. of grinding wheel:
250 mm
grinding wheel size:
250 x 32 x 32 mm
weight:
33 kg
BERNARDO WB 100, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal

BERNARDO

WB 100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Characteristics : - For precise cold and hot bending of flat, round and square steels - Stable design for screwing onto the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Angle stop - bending plates - bending lever - Material stop

Lagernummer:
1008-8361096
square edge steel:
16 x 16 mm
flat steel:
100 x 5 mm
L-beam:
60 x 8 mm
bending radius min.:
190 mm
A+B ERBEND MFC 2025, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

A+B ERBEND

MFC 2025

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

techn. Data : - Sheet width 2,050 mm - Sheet metal thickness 2.50 mm steel - Sheet thickness 3.50 mm ALU - Sheet metal thickness 1.50 mm stainless steel - Lower beam adjustment 35 mm Furnishing : - electric / motorized swivel bending machine - with 15.6 "NC touchscreen control for upper beam / bending beam / backgauge - electrical backgauge / support table - manual lower beam adjustment (35 mm) - Double foot switch - Upper tool / bending rail Special accessories included: - electrical backgauge 10 - 750 mm - large material support table with ball casters

Lagernummer:
1008-8355068
sheet width:
2050 mm
plate thickness:
2,5 mm
daylight opening:
120 mm
back stop - adjustable:
10 - 750 mm
A + B TM 36 E / R 1200, Metal Processing, Threading machines, Thread-Cutting Machine

A + B

TM 36 E / R 1200

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

scope of delivery : - Operation via touch screen - Digital drilling depth display - Quick change holder - Quick change chuck - electric motor - 90 ° angle adjustment - mounting flange - quick change chuck: * M6-8 / M10 / M12 / M14 / M16 / M18-20 / M22 / M24 / M27-30 / M33 / M 36 ** Special accessories: - Including underframe as shown in the illustration - 900 x 600 mm

Lagernummer:
1008-8100033
thread dia.:
M6 - M36 M
turning speeds:
150 U/min
working area:
1200 Rmax.
engine output:
1,2 kW
BERNARDO GHD 25 TN, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

BERNARDO

GHD 25 TN

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Lagernummer:
1008-8092703
bore capacity in steel (diameter):
25,0 mm
throat:
255 mm
bore stroke:
120 mm
morse taper:
3 MK
BERNARDO TITAN 560-2000 PRO, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 560-2000 PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Thread clock - Chip back wall - operating tool

Lagernummer:
1008-8203115
turning length:
2000 mm
turning diameter:
560 mm
turning diameter over slide:
350 mm
turning speeds:
25 - 1500 U/min
BERNARDO MS 75 x 2000 S-2, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 75 x 2000 S-2

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823805
width of the strips:
75 mm
band length:
2000 mm
band speed:
14,5 / 29 m/sek
grinding width:
460 x 75 Plantisch mm
ERMAK SPEED BEND PRO 4.320, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.320

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-830222
pressure:
320 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
ALMI AL 12 U, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

ALMI

AL 12 U

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

The advantages at a glance: high productivity, low investment, simple and fast operation, several diameters immediately available and ideal for double corner joints. With the AL1-2U pipe notcher, you can cut pipes with outside diameters of Ø 26.9(3/4?) Ø 33.7(1?) Ø 42.4(1_¼”) Ø 48.3(1_1/2?) Ø 60.3(2?) and tubes for Notch zinc spouts with outside diameters from Ø22 to Ø76. Furnishing: - with release comb. f. Zinc runout notches - for tubes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - Bed. Instructions

Lagernummer:
1008-8390101
plate thickness:
5,0 mm
tube diameter:
27,9 - 61,0 mm
motor:
400 Volt
total power requirement:
2,2 kW
BERNARDO WK 30 FH Pro, Metal Processing, Presses, Tryout Press - hydraulic

BERNARDO

WK 30 FH Pro

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8371012
pressure:
30 t
stroke:
150 mm
table surface area:
185 mm Breite
column travel between the guideways:
530 mm
MEP - Halbautomat SHARK 382-1 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 382-1 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Control modes: - Manual mode - Semi-automatic dynamic operation - The semi-automatic cut is made by manually approaching the saw bow started in any position by actuating the hand switch - Semi-automatic operation (start / stop position of the saw bow is over the keyboard programmed, vice closes / opens automatically, the saw arch is automatically guided back to the start of the cut)

Lagernummer:
1008-8174105
cutting diameter:
280 mm
capacity 90 degrees: flat:
380 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
300 x 200 mm
ALMI AL 12 E, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

ALMI

AL 12 E

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

The advantages at a glance: high productivity, low investment, simple and fast operation, several diameters immediately available and ideal for double corner connections. With the motor-driven pipe notcher AL1-2E you can cut pipes with the Outside diameter Ø 26.9 (3/4?) Ø 33.7 (1?) Ø 42.4 (1_¼ ") Ø 48.3 (1_1 / 2?) and 60.3 (2?) Notch. Furnishing: - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - Required instructions

Lagernummer:
1008-8390102
plate thickness:
5,0 mm
tube diameter:
27,9 - 61,0 mm
motor:
400 Volt
total power requirement:
2,2 kW
BERNARDO DP 1, Metal Processing, Presses, Piercing Press
Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Piercing Press

Lagernummer:
1008-8392002
pressure:
1,0 t
throat:
95 mm
table length:
120 mm
table width:
120 mm
BERNARDO TB 1020 Flex, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 1020 Flex

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right 75 mm each | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Lagernummer:
1008-8355013
sheet width:
1020 mm
plate thickness:
2,5 mm
daylight opening:
48 mm
daylight opening:
150 mm ohne Segmente
ERMAK ECO BEND EXPERT 200/3, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 200/3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - FIESSLER AKAS - laser protection in front of the machine - Deer foot upper tool - Universal die block - manual table crowning - Safety device: light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Lagernummer:
1008-8301071
pressure:
200 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
250 mm
BERNARDO RD 1600x60 VARIO, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

BERNARDO

RD 1600x60 VARIO

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool

Lagernummer:
1008-8110007
bore capacity in steel (diameter):
60,0 mm
arm length:
350 - 1.600 mm
workpiece height max.:
665 x 1.250 mm
turning speeds:
38 - 2.000 U/min
ERMAK FIBERMAK SM 4000.3 x 1,5, Metal Processing, Sheet metal working / shaeres / bending, Laser Cutting Machine

ERMAK

FIBERMAK SM 4000.3 x 1,5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Laser Cutting Machine

Lagernummer:
1008-8423115
table length:
3000 mm
table width:
1500 mm
laser capacity in Watt:
4.000 Watt
x-axis:
3050 mm
BERNARDO MASTER 380-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER 380-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool Special accessories included in the price: - 3-axis digital display

Lagernummer:
1008-8203117
turning length:
1000 mm
turning diameter:
380 mm
turning dia. in gap:
490 mm
spindle bore:
51,0 mm
INDUMASCH SAF 206, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

INDUMASCH

SAF 206

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Lagernummer:
1008-8390120
:
6,0 mm ST 40
cutting capacity:
4,0 mm VA
table::
700 x 620 mm
blade length:
200 x 200 mm
BERNARDO PWK 50 F, Metal Processing, Presses, Tryout Press - hydraulic

BERNARDO

PWK 50 F

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8370068
pressure:
50 t
stroke:
200 mm
table surface area:
730 x 205 mm
dayligth:
1050 mm
OMCN Mod. P30 SA, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. P30 SA

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - 2 stage press with autom. retreat - fast feed by closing the two handwheels - high pressure by opening the upper handwheel - Shooting table with winch for height adjustment. - Piston made of tempered, chrome-plated special steel - Operating instructions in German

Lagernummer:
1008-8370054
pressure:
30 t
stroke:
190 mm
table surface area:
170 x 695 mm
dayligth:
1000 mm
BERNARDO MRA-Pro, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

MRA-Pro

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Lagernummer:
1008-8390110
plate thickness:
3,0 mm
tube diameter:
60,0 mm
motor:
230 Volt
total power requirement:
1,1 kW
FMS PF - 20 P, Metal Processing, Presses, Eccentric Press - Single Column

FMS

PF - 20 P

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Eccentric Press - Single Column

Lagernummer:
1008-8371042
pressure:
20 t
throat:
200 mm
stroke:
0 - 50 mm
table::
360 x 550 mm
BERNARDO DP 5, Metal Processing, Presses, Piercing Press
Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Piercing Press

Lagernummer:
1008-8392003
pressure:
5,0 t
throat:
215 mm
workpiece height max.:
445 mm
Mandrel diameter:
50 x 50 x 645 mm
ERMAK HVR CNC 4100-10 HH MONO, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

HVR CNC 4100-10 HH MONO

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device * Monoblock design

Lagernummer:
1008-8328130
sheet width:
4100 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
down holder:
28 Stück
ERMAK HVR CNC 3100-6 HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

HVR CNC 3100-6 HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device

Lagernummer:
1008-8328127
sheet width:
3100 mm
plate thickness:
6,0 mm
distance between columns:
3.100 mm
down holder:
14 Stück
A+B Mod. ACO-45, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-45

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing: - with spring tension for deburring angle material - sanding belt - Operating instructions in German

Lagernummer:
1008-823114
width of the strips:
45 mm
band length:
850 mm
total power requirement:
230 Volt
total power requirement:
0,18 kW
ERMAK CNC HGD 3100-10, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGD 3100-10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321061
sheet width:
3100 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
down holder:
14 Stück
ERMAK SPEED BEND PRO 4.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8302191
pressure:
175 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
FALKEN IKMP-1.2, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

FALKEN

IKMP-1.2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

- robust beading machine with motor-driven rollers - lower shaft with adjustable stop - clearly arranged switching elements - Underframe equipped with storage compartment - Powerful drive motor, even under constant load - Mobile foot switch for right and left rotation Furnishing: - motor-driven beading machine - including various sets of rollers - workpiece stop - Foot switch with emergency stop - Operating instructions in German - CE mark / declaration of conformity

Lagernummer:
1008-847045
plate thickness:
1,20 mm
throat:
250 mm
distance between roll centers:
62,0 mm
engine output:
0,75 kW
ERMAK SPEED BEND PRO 3.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 3.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8302070
pressure:
175 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
A+B Mod. ACO-3, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-3

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing: - metal belt grinder - workpiece stop - sanding belt - Operating instructions in German

Lagernummer:
1008-823113
width of the strips:
300 mm
band length:
2070 mm
band speed:
7 m/sec
engine output:
1,5 kW
BERNARDO KFM 600 S, Other Accessories for Machine Tools, Other accessories for machine tools, Milling Device

BERNARDO

KFM 600 S

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Milling Device

Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool

Lagernummer:
1008-8130703
power capacity:
0,75 kW
degree:
45° Grad
turning speeds:
10.000 U/min
milling height:
4,0 mm
FALKEN R 1270 x 75, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

R 1270 x 75

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm

Lagernummer:
1008-8405561
sheet width:
1270 mm
plate thickness:
1,50 mm
roll length:
1270 mm
roll diam. toproll:
75,0 mm
BERNARDO MASTER 400-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER 400-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 90 mm - Live steady rest - passage diam. max. 70 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - operating tool

Lagernummer:
1008-8203119
turning length:
1000 mm
turning diameter:
400 mm
turning dia. in gap:
560 mm
spindle bore:
52,0 mm
ERMAK EKM 60 TN, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

ERMAK

EKM 60 TN

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Lagernummer:
1008-8411002
pressure:
60,0 t
square edge steel:
35,0 mm
L-beam:
120x120x12 mm
round bar steel:
40,0 mm
FALKEN RST 1270 x 86 x 2,5, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RST 1270 x 86 x 2,5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller

Lagernummer:
1008-8405516
sheet width:
1270 mm
plate thickness:
2,5 mm
roll length:
1270 mm
roll diam. toproll:
86,0 mm
FALKEN IDK-2, Metal Processing, Sheet metal working / shaeres / bending, Circular Shear

FALKEN

IDK-2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Circular Shear

Furnishing: - Motorized circular shears with hardened blades - with machine base - electr. Engine brake - Central lubrication - foot switch - CE declaration

Lagernummer:
1008-8328163
cutting capacity:
2,0 mm
throat:
700 / 280 mm
round blank diameter max.:
1.000 mm
round blank diameter min.:
180 mm
A + B BT 114 S, Metal Processing, Grinding machines, Belt Grinding Machine

A + B

BT 114 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing: - Pipe belt sander with - autom. Material feed with separate drive motor - Replacement sanding belts - Manual adjustment of the pipe tension - Polish bent tubes up to 180 "(angle) - manual work is possible without a feed - CE mark / declaration of conformity

Lagernummer:
1008-823833
width of the strips:
50 mm
band length:
940 mm
band speed:
3 - 22 m/min
turning speeds:
1450 U/min
A+B Mod. ACO-1, 400 Volt, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-1, 400 Volt

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - sanding belt - workpiece stop - Operating instructions in German

Lagernummer:
1008-823111
width of the strips:
100 mm
band length:
920 mm
band speed:
7 m/sec
loading area:
300 x 150 mm
FALKEN DPM 1070-100, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1070-100

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8371063
pressure:
100 t
stroke:
300 mm
table surface area:
1070 x 260 mm
column travel between the guideways:
1070 mm
MEP SHARK 282 CCS / MDE, Metal Processing, Saws, Band Saw

MEP

SHARK 282 CCS / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German

Lagernummer:
1008-8174118
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: round:
230 mm
MEP - Halbautomat SHARK 512 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 512 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 60 ° - autom. Saw bow lowering, infinitely adjustable Feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Fig. Shows a similar machine

Lagernummer:
1008-8174106
cutting diameter:
330 mm
capacity 90 degrees: flat:
510 x 320 mm
capacity 90 degrees: square:
320 x 320 mm
capacity 45 degrees: flat:
350 x 320 mm
FALKEN DPM 1070-150, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1070-150

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8371064
pressure:
150 t
stroke:
300 mm
table surface area:
1070 x 290 mm
column travel between the guideways:
1070 mm
BERNARDO RD 820 x 32, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

BERNARDO

RD 820 x 32

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Lagernummer:
1008-8110015
bore capacity in steel (diameter):
32,0 mm
arm length:
310 - 820 mm
workpiece height max.:
370 - 870 mm
turning speeds:
75 - 1220 U/min