Machines

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207350 * Machinevideo : https://www.youtube.com/watch?v=ba6oQf-zdhs

** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 3x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207331

** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207330 * Machinevideo : https://www.youtube.com/watch?v=iqU7Bkh6INo

** New price ~ 13,500 euros ** Special price on request Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - "NEWALL B60" digital display, front left - 3-jaw chuck Ø 160 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder with 3x inserts - folding steel holder protection - Infinitely variable speed adjustment, with digital speed display - Movable tailstock with live center - Chip protection rear panel - foot brake - 6x machine swing feet - Machine light - EMERGENCY OFF button on the front - Coolant device with container * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207333

** Machine from a vocational school (NL) ** very well-maintained condition (!!) Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 200 mm - RÖHM 4-jaw chuck Ø 250 mm - foldable lathe chuck protection - Steel holder with 2x inserts - fixed bezel - movable tailstock, with rotating center point - removable chip tray - Chip protection back wall - Coolant device - Bed stop - EMERGENCY stop button (on digital display) - rigid lead and pull spindle cover - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207353

** Machine from a vocational school (NL) ** very well-maintained condition (!!) Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 200 mm - RÖHM 4-jaw chuck Ø 250 mm - foldable lathe chuck protection - Steel holder with 2x inserts - fixed bezel - movable tailstock, with rotating center point - removable chip tray - Chip protection back wall - Coolant device - Bed stop - EMERGENCY stop button (on digital display) - rigid lead and pull spindle cover - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207354

** Machine from a vocational school (NL) Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RSF "Z-520" 2-axis digital display - RÖHM 3-jaw chuck Ø 200 mm, including chuck key - foldable lathe chuck protection - DREHBLITZ steel holder - TYPE DB 70 - with 2x inserts - robust, movable tailstock including center point - Chip protection back wall - 4x machine swing feet - 1x thread clock - Lead and pull spindle protection - Coolant device - EMERGENCY stop button on the front right - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207352

** Machine from a vocational school (NL) Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RSF "Z-520" 2-axis digital display - RÖHM 3-jaw chuck Ø 200 mm, including chuck key - foldable lathe chuck protection - DREHBLITZ steel holder - TYPE DB 70 - with 2x inserts - robust, movable tailstock including center point - Chip protection back wall - 4x machine swing feet - 1x thread clock - Lead and pull spindle protection - Coolant device - EMERGENCY stop button on the front right - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207351

** from a training workshop ** good condition (!) The Colchester Triumph VS is the “all-rounder”. From the heavy cutting This precision machine corresponds to the fine precision finish Requirements from modern tool construction, form construction or training company. Furnishing: - 3 -cheezing - diameter 200 mm, with replacement cheeks - Multifix steel holder, with use - Continuous speed adjustment via electric potentiometer - digital speed display - sliding riding stock - feed key - Coolant pan - Not from button, front - Spanning back wall - User manual (PDF) * Maschinenlink: http://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9207343

Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front - adjustable bed stop - Coolant system including coolant pan - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207345 * Machinevideo : https://www.youtube.com/watch?v=zCGu4i6V5dM

** New price ~ 3.500 euros **Special price on request Furnishing: - very handy machine with lead and pull spindle - Ideal for the hobby sector - 3-jaw chuck 160 mm including replacement jaws + lathe chuck protection - fixed bezel - rotating bezel - Quadruple steel holder - chip tray - Splash wall - Bed made of gray cast iron, solid design - Bed guide inductively hardened and ground - Main spindle with Camlock D1-4 mount - Tailstock can be moved +/- 5 mm for taper turning - Spindle bearing with 2 adjustable precision bearings - Single lever clamping for the tailstock - Guides can be adjusted using wedge strips - Upper slide can be rotated +/- 45° - Machine base including side storage compartments - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207356

** good / well-maintained condition (!!) Furnishing: - 3-jaw chuck Ø 200 mm (CAMLOCK GR 6) - MULTIFIX steel holder, with 4x inserts - robust, movable tailstock - rotating center punch tips - Food key - various other accessories - Coolant device - removable chip tray - rear splash guard - Connection cable + plug - Emergency stop button - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207355

** from a workshop for the disabled (!!) Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray

** from a maintenance workshop - good condition (!!) ** Machine was checked annually Furnishing: - heavy - robust lead/pull spindle machine - "WERNER GARANT" face plate Ø 500 mm - HEIDENHAIN digital display - type ND 730 - MULTIFIX steel holder, with 3x inserts - "FINN SAFETY" lining protection - type SPS 600 - movable tailstock - Machine light - 1x food key - Chip back wall - movable bed stop - 2x EMERGENCY STOP switches - Coolant system, with collecting tray * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207337

** New price ~ 23.000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

** Refurbished and repainted in 2013 ** Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

** Machine from a maintenance workshop ** current new price ~ 17.500 euros ** Special price on request Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RÖHM 3-jaw chuck, including replacement jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 2x inserts - movable tailstock, with rotating center center - universally adjustable machine light - Chip protection back wall - EMERGENCY stop button at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207346

** Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis "HEIDENHAIN" digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 5x inserts - Movable tailstock, with live center - Chip protection rear panel - 4x machine swing feet - 2x EMERGENCY OFF button on the front - Lead/feed screw protection - adjustable bed stop - Various application / turning tools * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207335