Skip navigation

Machines

IBARMIA IBERDRILL B 50, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IBARMIA

IBERDRILL B 50

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Lagernummer:
1008-8104209
Boring power:
50,0 mm
bore capacity in cast iron:
60,0 mm
bore stroke:
230 mm
thread dia.:
bis M 36 M
IBARMIA IBERDRILL B 60, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IBARMIA

IBERDRILL B 60

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Lagernummer:
1008-8104210
Boring power:
60,0 mm
bore capacity in cast iron:
70,0 mm
bore stroke:
260 mm
table surface area:
600 x 600 mm
BERNARDO GB 30 Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 30 Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Lagernummer:
1008-8100206
bore capacity in steel (diameter):
32,0 mm
threading:
22 M
bore stroke:
125 mm
throat:
280 mm
BERNARDO GB 50 NC Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 50 NC Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

The gear column drilling machine GB 50 NC Vario is standard with a infinitely variable speed control, reducing the cutting speed can be optimally adapted to the workpiece. Because of the heavy, massive It is designed primarily for use by professional users or ideally suited in mechanical engineering or workshops. - Equipped with motorized table height adjustment as standard - 6 automatic drilling feeds switchable via electromagnetic clutch - Hand-scraped drilling table made of solid gray cast iron, swiveling from -45° to + 45 ° - Ground base plate with T-slots - for clamping particularly tall workpieces - Guaranteed concentricity = 0.02 mm, measured in the quill - Automatic tool ejector and thread cutting device as standard - Very smooth running thanks to ground gear wheels running in an oil bath - Stable and polished steel column, designed for heavy use - User-friendly operation via membrane keyboard Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - Motorized table lift - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - First filling with Shell Tellus 46 - LED machine operators - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Lagernummer:
1008-8100288
bore capacity in steel (diameter):
50,0 mm
throat:
360 mm
bore stroke:
220 mm
morse taper:
4 MK
BERNARDO SB 30 Profi, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

SB 30 Profi

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Lagernummer:
1008-8100269
bore capacity in steel (diameter):
32,0 mm
throat:
230 mm
bore stroke:
120 mm
morse taper:
3 MK
ALZMETALL AB 40 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 40 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Lagernummer:
1008-8100400
bore capacity in steel (diameter):
40,0 mm
throat:
300 mm
bore stroke:
160 mm
threading:
M30 in St 60
ALZMETALL AX 3 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Lagernummer:
1008-8100381
bore capacity in steel (diameter):
40,0 mm
threading:
M 24 in St 60
throat:
293 mm
bore stroke:
120 mm
ALZMETALL ALZSTAR 23/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 23/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Lagernummer:
1008-8100360
bore capacity in steel (diameter):
23,0 mm
throat:
250 mm
bore stroke:
100 mm
morse taper:
2 MK
ALZMETALL AX 4 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 4 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

Lagernummer:
1008-8100382
bore capacity in steel (diameter):
55,0 mm
throat:
300 mm
bore stroke:
120 mm
threading:
M 36 in St 60
ALZMETALL ALZSTAR 30/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 30/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

Lagernummer:
1008-810036
bore capacity in steel (diameter):
30,0 mm
throat:
293 mm
bore stroke:
140 mm
morse taper:
3 MK
ALZMETALL AX 3 iTRONIC-V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 iTRONIC-V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100654
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
ALZMETALL AX 4 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 4 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Lagernummer:
1008-8100655
bore capacity in steel (diameter):
55,0 mm
throat:
300 mm
bore stroke:
140 mm
morse taper:
4 MK
ALZMETALL ALZSTAR 40 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 40 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Lagernummer:
1008-8100335
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
ALZMETALL AB 34 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 34 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Lagernummer:
1008-8100320
bore capacity in steel (diameter):
34,0 mm
throat:
300 mm
bore stroke:
160 mm
morse taper:
4 MK
BERNARDO GB 28 S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 28 S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Lagernummer:
1008-8100202
bore capacity in steel (diameter):
28,0 mm
threading:
12 M
bore stroke:
130 mm
throat:
250 mm
ALZMETALL AX 3 iTRONIC-V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 iTRONIC-V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100657
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
BERNARDO B 610 PRO, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

B 610 PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Lagernummer:
1008-8101010
bore capacity in steel (diameter):
32,0 mm
throat:
255 mm
bore stroke:
120 mm
morse taper:
4 MK
ALZMETALL AB 50 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 50 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Lagernummer:
1008-810039
bore capacity in steel (diameter):
50,0 mm
throat:
350 mm
bore stroke:
200 mm
threading:
M 42 in St 60
BERNARDO GB 35 Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 35 Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Lagernummer:
1008-8100264
bore capacity in steel (diameter):
35,0 mm
bore capacity in cast iron:
40,0 mm
throat:
320 mm
threading:
M 24 in Stahl
ALZMETALL ALZSTAR 40 iTRONIC -V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 40 iTRONIC -V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100653
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
ALZMETALL ALZSTAR 30 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 30 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Lagernummer:
1008-8100652
bore capacity in steel (diameter):
30,0 mm
throat:
293 mm
bore stroke:
140 mm
morse taper:
3 MK
BERNARDO GHD 28 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GHD 28 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Lagernummer:
1008-8101006
bore capacity in steel (diameter):
28,0 mm
throat:
320 mm
bore stroke:
150 mm
morse taper:
3 MK
BERNARDO SB 40 Profi, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

SB 40 Profi

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sleeve MK 4/3, MK 4/2, MK 3/1 - LED machine light - Automatic tool ejector - Height-adjustable protective cover

Lagernummer:
1008-8100277
bore capacity in steel (diameter):
40,0 mm
throat:
320 mm
bore stroke:
160 mm
morse taper:
4 MK
ALZMETALL AB 34 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 34 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Lagernummer:
1008-8100656
bore capacity in steel (diameter):
34,0 mm
throat:
300 mm
bore stroke:
160 mm
morse taper:
4 MK