Skip navigation

Machines

BERNARDO TITAN 560-2000 PRO, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 560-2000 PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Chip back wall - operating tool

Lagernummer:
1008-8203115
turning length:
2000 mm
turning diameter:
560 mm
turning diameter over slide:
350 mm
turning speeds:
25 - 1500 U/min
ERMAK CNC HGS 2100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGS 2100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-832101
sheet width:
2100 mm
plate thickness:
6,0 mm ST 42
thickness at "Niro-steel":
4,0 mm VA
cutting angle:
1,2 Grad
FASTI 2095-20/2, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FASTI

2095-20/2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - robust electric motorized folding machine - Bending angle adjustment via electric potentiometer * infinitely adjustable * with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment - freely movable double foot switch - with new pointed rail - Operation manual * Machine video: https://www.youtube.com/watch?v=n48Mu4hQrDs https://www.youtube.com/watch?v=pVX99IFvx0g * Machine can only be used with a bending length of 1.750 mm

Lagernummer:
1008-9355160
sheet width:
1750 mm
plate thickness:
2,0 mm
distance between columns:
2100 mm
daylight opening:
350 mm
PEDDINGHAUS HYDRAULIC 1250, Metal Processing, Stamping press, Punching Press

PEDDINGHAUS

HYDRAULIC 1250

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** good condition (!!) ** New price without accessories approx. 27.500 euros ** Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - User manual (PDF) * Special accessories included: - NC controlled stop system - WITHOUT function - the stop system is included in delivery - with error: Reference travel cannot be carried out - User language: Dutch - Stop system was not taken into account in the sales price of the machine * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412175

Lagernummer:
1008-9412175
pressure:
125 t
punching cross-cut in cmm:
Ø 39 in 24 mm
stroke:
10 - 50 mm
column arm:
510 mm
BERNARDO HBS 275, Metal Processing, Saws, Band Saw

BERNARDO

HBS 275

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Lagernummer:
1008-8170082
cutting diameter:
225 mm
saw band length:
2480 mm
table height:
910 mm
capacity 90 degrees: flat:
245 x 150 mm
A + B HU Tap AT-12/II, Metal Processing, Threading machines, Thread-Cutting Machine

A + B

HU Tap AT-12/II

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Lagernummer:
1008-8101012
thread dia.:
12 M max.
turning speeds:
400 U/min
thread:
M 3 - M 12 M
working area:
1600 R max.
BERNARDO KF 20 L Super, Metal Processing, Boring mills / Machining Centers / Drilling machines, Drilling and Milling M/C

BERNARDO

KF 20 L Super

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Drilling and Milling M/C

Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Lagernummer:
1008-8131010
bore capacity in steel (diameter):
13,0 mm
x-travel:
300 mm
y-travel:
130 mm
turning speeds:
100 - 2500 U/min
HM TAS 150 X, Metal Processing, Grinding machines, Belt Grinding Machine

HM

TAS 150 X

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - integrated suction - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful motor 4.0 kW - suction nozzle ** including: integrated suction **

Lagernummer:
1008-823831
width of the strips:
150 mm
band length:
2000 mm
band speed:
34,0 mm/sek
grinding width:
530 Plantisch mm
FASTI TCHE 12/4, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

FASTI

TCHE 12/4

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** Machine from a technical college - prototype construction ** very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325278

Lagernummer:
1008-9325278
sheet width - max.:
1255 mm
plate thickness:
4,0 mm ST
plate thickness:
2,0 mm VA
plate thickness:
6,0 mm ALU
BAUER - Automat HS 260 A, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** maintained condition (!!) Furnishing: - electro-hydraulic band saw - automatic - electro-hydraulic saw bow lowering - stepless - adjustable material stop for feed unit - manual & automatic mode selectable - Front left control panel - continuous speed adjustment of the saw blade * Manual/lateral adjustment, including analogue speed display - manual saw band tensioning using a cross handle - manual material tensioning using a handwheel - adjustable saw blade guides - manual miter adjustment using the machine vice - Machine base * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173352

Lagernummer:
1008-9173352
cutting diameter:
260 mm
dimensions of saw-band:
3660 x 27 x 0,9 mm
capacity 90 degrees: round:
260 mm
capacity 90 degrees: flat:
320 x 240 mm
BERNARDO RD 1600x60 VARIO, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

BERNARDO

RD 1600x60 VARIO

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool

Lagernummer:
1008-8110007
bore capacity in steel (diameter):
60,0 mm
arm length:
350 - 1.600 mm
workpiece height max.:
665 x 1.250 mm
turning speeds:
38 - 2.000 U/min
BERNARDO TB 1020 FLEX, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 1020 FLEX

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 |200 | 270 mm

Lagernummer:
1008-8355013
sheet width:
1020 mm
plate thickness:
2,5 mm
daylight opening:
48 mm
daylight opening:
150 mm ohne Segmente
ERCOLINA HB 60 - T, Metal Processing, Sheet metal working / shaeres / bending, Pipe-Bending Machine

ERCOLINA

HB 60 - T

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Pipe-Bending Machine

Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis * Bending segments on request

Lagernummer:
1008-8362029
tube diameter:
2" x 3,91 mm ST
tube diameter:
60 x 4,5 mm GAS
revolutions per minute:
2,5 U/min
radius:
min. 2 x D mm
ALZMETALL AB 3 E, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 3 E

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** from a training workshop ** maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - manual spindle feed via cross handle - Work table with 2x T-slots - Pole-changing drive motor - Table height adjustment via hand crank - Connection cable including 16A plug * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103747

Lagernummer:
1008-9103747
Boring power:
32.0 mm
bore capacity in cast iron:
35.0 mm
morse taper:
MK 3
spindle stroke:
160 mm
A + B RB 3000 Abfuhr, Metal Processing, Saws, Roller tracks / stop systems

A + B

RB 3000 Abfuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Lagernummer:
1008-8801018
:
3000 mm
Working width:
360 mm
roll diameter:
60,0 mm
weight max. in kg:
900 kg
HM TAS 75 X, Metal Processing, Grinding machines, Belt Grinding Machine

HM

TAS 75 X

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle ** including: integrated suction **

Lagernummer:
1008-823819
width of the strips:
75 mm
band length:
2000 mm
band speed:
34,0 mm/sek
grinding width:
530 Plantisch mm
JOISTEN & KETTENBAUM mikromat 1200 S, Other Machines, Other attachments, Sandblasting Machine

JOISTEN & KETTENBAUM

mikromat 1200 S

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Industrial sandblasting system - Working space: 1,200 x 750 x 750 mm LxWxH - Perforated metal work grid with stable support - 2x side passage openings with closure sliders * Dimensions: 340 x 240 mm - 1x sectional door that opens upwards, revealing the entire blasting space - continuous jet pressure adjustment - Pressure gauge - pressure display - Front window / plexiglass - freely movable foot switch - Drain/collection container for blasting material - Blasting gun + blasting gloves * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9803037

Lagernummer:
1008-9803037
through-put width:
750 mm
working heigth:
750 mm
working area L-W-H:
1200 x 750 x 750 mm
compressed air:
0 - 10 bar
MOESSNER SM 420, Metal Processing, Saws, Band Saw - Vertical

MOESSNER

SM 420

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

** from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base * Machinevideo : https://www.youtube.com/watch?v=UVpE_bLGHa0

Lagernummer:
1008-9173296
roll diameter:
420 mm
throat:
410 mm
workpiece height:
295 mm
cutting speed:
12 - 375 m/min
MB PRO 3 COM 1000, Metal Processing, Welding machines, Rotary Welding Table

MB

PRO 3 COM 1000

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Lagernummer:
1008-845902
table diameter:
340 mm
table load:
290 horizontal kg
table load capacity:
190 vertikal kg
turning speeds:
0,6 - 6,0 U/min
HM HBM 2000-45S man., Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

HM

HBM 2000-45S man.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Lagernummer:
1008-8355043
sheet width:
2035 mm
plate thickness:
4,5 mm ST
thickness at "Niro-steel":
3,0 mm VA
bending angle max.:
0 - 135 °
SCHECHTL MT 200, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHECHTL

MT 200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - Compact and clear mechanical design - manual backgauge, adjustment via handwheel from behind - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - extended, extendable support table - rear guard - Selector switch for single and continuous stroke - freely movable foot switch - Operation manual * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325301 * Machinevideo : https://www.youtube.com/watch?v=FuMHEfd3m38 https://www.youtube.com/watch?v=nWZENuPGasQ

Lagernummer:
1008-9325301
sheet width:
2050 mm
plate thickness:
2,0 mm ST
cutting thickness max.:
3,0 mm AL
cutting thickness max.:
1,0 mm VA
TURNIER XQ6226A, Metal Processing, Milling machines, Universal Milling Machine

TURNIER

XQ6226A

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** New price ~ 13.000 euros The TURNIER universal milling machine is suitable for execution of light and medium-heavy milling work. Thanks to her big Versatility and ease of conversion can use them in workshops for processing small and medium-sized series with success be used. Furnishing : - Universal milling head, adjustable to all angular positions - Swiveling control panel with ergonomically positioned switches - Heavy cast iron machine stand for vibration-free work - Dovetail guides - Standard with automatic table feed in x and y axis - Precisely surface-machined cross table with T-slots - Digital readout for x, y and z axis included ** Some of the table etc. were coated with anti-corrosion grease (brown). ** Housing of operation with transport damage (function is given)

Lagernummer:
1008-9131198
x-travel:
600 mm
y-travel:
270 mm
z-travel:
400 mm
spindle taper ISO:
40 ISO
BERNARDO SMART 410-1000 V DIGITAL, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 V DIGITAL

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347

Lagernummer:
1008-9207347
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
HM HBM 2500-45S man., Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

HM

HBM 2500-45S man.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Lagernummer:
1008-8355046
sheet width:
2540 mm
plate thickness:
4,5 mm ST
thickness at "Niro-steel":
3,0 mm VA
bending angle max.:
0 - 135 °
BERNARDO SMART 410-1000 V DIGITAL, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 V DIGITAL

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349

Lagernummer:
1008-9207349
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
FALKEN 4 R HMS 1550 x 150, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

FALKEN

4 R HMS 1550 x 150

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - hydraulic 4-roll bending machine - separate control panel - hardened rolls SAE 1050 CK 45 - Conical bending device - 3 digital displays for exact roller positions - hydraulic folding storage

Lagernummer:
1008-8405521
sheet width:
1550 mm
plate thickness:
6,5 mm
pre-bending:
4,5 mm
diameter of upper rolls:
150 mm
BERNARDO SMART 410-1000 V DIGITAL, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 V DIGITAL

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207350 * Machinevideo : https://www.youtube.com/watch?v=ba6oQf-zdhs

Lagernummer:
1008-9207350
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
MEP - Vollautomat SHARK 331-1 NC 5.0 Spider MDE, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 331-1 NC 5.0 Spider MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows “CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feeder with protective cover and safety limit switch - Positioning of the saw head and movement of the feeder using the joystick - Automatic recognition of the start of the cut - Electronic strap tension control - Automatic monitoring of the cutting load - Removable coolant pan * (equipped with 2 electric pumps for lubrication and cooling of the saw band) - Instructions DE

Lagernummer:
1008-8174119
cutting range:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: round:
260 mm
BAYKAL APH-S 2606x90, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APH-S 2606x90

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good condition (!!) Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe front laser protection device - 2x front, sliding support arms (“sliding” system) - side protective grilles - freely movable foot control - Operation manual **Special accessories included: - UKB tool adapter (13x pieces) - UKB tool clamping plates (13x pieces) - split ROLLERI upper tool 85° - split ROLLERI 4V reversible die 85° * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308286

Lagernummer:
1008-9308286
pressure:
90,0 t
chamfer lenght:
2600 mm
distance between columns:
2050 mm
column arm:
310 mm
BERNARDO SMART 410-1000 V DIGITAL, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 V DIGITAL

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207348 * Machinevideo : https://www.youtube.com/watch?v=I6HJZ_d3wIo

Lagernummer:
1008-9207348
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
BERG & SCHMID - Vollautomat GBS 305 VA-I CNC, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Lagernummer:
1008-8174061
cutting diameter:
305 mm
capacity 90 degrees: flat:
350 x 200 mm
capacity 90 degrees: square:
260 mm
capacity 45 degrees: flat:
230 x 200 mm
STROJARNE PIESOK NTC 2000/2,5, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

STROJARNE PIESOK

NTC 2000/2,5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - electrical backgauge, with analog display - Stop can be folded up - for longer sheet metal strips - welded monoblock steel construction - Special steel knives that can be used on both sides, hardened - Control panel and mechanical stroke counter - manual cutting gap adjustment - 3x support arms - foot switch * Machinevideo : https://www.youtube.com/watch?v=nkZfJ0M5H_U

Lagernummer:
1008-9325132
sheet width:
2050 mm
plate thickness:
2,5 mm
thickness at "Niro-steel":
2,0 mm
no. of strokes:
75 Hub/min
HEZINGER B10-3000, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

HEZINGER

B10-3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** New price from 56.000 euros ** Special price on request Furnishing: - electro-hydraulic sheet metal plate shears "oscillating cut" - ELGO NC control - model "P40T Touch", front left control panel - CNC electro-motorized back gauge, with ball screws * including retraction function selectable * Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSLER rear protection device - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325300

Lagernummer:
1008-9325300
sheet width:
3100 mm
plate thickness:
10.0 mm
thickness at "Niro-steel":
6.0 mm
cutting angle:
2.0 °
TRUMPF TRUMABEND V 130 X, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TRUMABEND V 130 X

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - CNC WILA electro-motor table crowning - TRUMPF electro-hydraulic upper tool clamping - TRUMPF electro-hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front support arms - incl. "Sliding System" - Rear safety device (sliding door) - Safety device on the side (pivoting door) - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308380 * Machinevideo : https://www.youtube.com/watch?v=bgqj2HCDid4

Lagernummer:
1008-9308380
pressure:
130 t
chamfer lenght:
3060 mm
distance between columns:
2690 mm
column arm:
410 mm
MEP - Vollautomat SHARK 332-1 NC 5.0, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 332-1 NC 5.0

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

Lagernummer:
1008-8174099
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: round:
260 mm
PEDDINGHAUS PEDDIMASTER 80/110, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

PEDDINGHAUS

PEDDIMASTER 80/110

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** very good condition (!!) Furnishing: - hydraulic, combined profile steel shears * with release station * with punching station .. punching capacity 800kN * Flat steel shears .. Shear capacity 100kN * Angle steel scissors * Angle steel knife for cutting 90 ° & 45 ° miters * Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF)

Lagernummer:
1008-9412137
pressure:
80,0 / 110 t
punching cross-cut in cmm:
27,0 in 20 mm
L-beam:
120 x 13 mm
L-beam:
T 120 x 12 mm
BERG & SCHMID GBS 242 DG AutoCut, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 242 DG AutoCut

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter cuts left 60 ° + right 45 ° - cutting speed 37 + 74 m / min. - Ball-bearing turntable for easy miter adjustment (durable) - Movable quick-release vice - Quick release lever - easy miter adjustment - for sawing solid material and profiles - Machine base with automatic cooling - electrical display and monitoring of the machine - Operation manual Auto-cut system = 3-step system - Automatic lowering of the saw frame via the hydraulic cylinder - infinitely adjustable feed - with limit switch - High speed lowering of the saw frame from the rest position to the workpiece - then switch to normal saw feed - Manual mode

Lagernummer:
1008-8170062
cutting diameter:
250 mm
capacity 90 degrees: square:
210 x 210 mm
capacity 90 degrees: flat:
290 x 210 mm
capacity 45 degrees: round:
220 mm
HACO PPM 36.200, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPM 36.200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * Torsion shaft for parallelism - electric back stop (X axis) * with handwheel for fine adjustment * on ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361

Lagernummer:
1008-9308361
pressure:
200 t
chamfer lenght:
3600 mm
distance between columns:
3150 mm
stroke of upper beam:
200 mm
BERG & SCHMID GBS 218 Eco AutoCut, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 218 Eco AutoCut

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter cuts up to 60 ° left - cutting speed 35 + 70 m / min - Vice with quick clamping device - Belt tension control - machine base - electric automatic cooling - Operation manual Auto-cut system = 3-step system - Automatic lowering of the saw frame via the hydraulic cylinder - infinitely adjustable feed - with limit switch - High speed lowering of the saw frame from the rest position to the workpiece - then switch to normal saw feed - Manual mode

Lagernummer:
1008-8174051
cutting diameter:
220 mm
capacity 90 degrees: square:
210 x 210 mm
capacity 90 degrees: flat:
230 x 185 mm
capacity 45 degrees: round:
150 mm
PEDDINGHAUS HYDRAULIK 500, Metal Processing, Stamping press, Punching Press

PEDDINGHAUS

HYDRAULIK 500

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** good condition (!!) ** from a maintenance workshop Furnishing: - hydraulic punch, with large overhang - Sheet metal wipers with wiper plates - stepless stroke adjustment - Various application tools - Die base - free-moving footswitch - Operation manual

Lagernummer:
1008-9412156
pressure:
50,0 t
punching cross-cut in cmm:
31 in 12 mm
stroke:
max. 32,0 mm
column arm:
510 mm
GERVER GG.4P., Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

GERVER

GG.4P.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - pneumatically driven sheet metal shears - manual backgauge - Pneumatic pressure gauge - 2x side table stops including mm scale - 1x movable table stop - Piece counter - mechanical sheet metal hold-down device - Machine light - freely movable foot switch * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325334

Lagernummer:
1008-9325334
sheet width:
605 mm
plate thickness:
1.50 mm
distance between columns:
605 mm
back stop - adjustable:
300 mm
BERNARDO WK 30 FH Pro, Metal Processing, Presses, Tryout Press - hydraulic

BERNARDO

WK 30 FH Pro

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8371012
pressure:
30 t
stroke:
150 mm
table surface area:
185 mm Breite
column travel between the guideways:
530 mm
DURMA SB 3010 NT, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

DURMA

SB 3010 NT

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop ** New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears * with DURMA ENC 100M NC control * Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - Manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x side stop 1.500 mm - 2x front support arms 1.000 mm - Ball transfer units in the front support table - hinged finger guard, with safety switch - Light barrier behind the machine (safety device) - free-moving footswitch - CE mark/Declaration of Conformity

Lagernummer:
1008-9325267
sheet width:
3100 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
distance between columns:
3120 mm
TECNA 3402 N, Metal Processing, Welding machines, Spot Welding Machine

TECNA

3402 N

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Spot Welding Machine

Furnishing: - Spot welding machine from a training workshop - Welding control TE 90 Mark II Welding control TE 90 is a microprocessor control for single-phase Resistance welding machines. The welding control has the task of: To control machine elements, especially the SCR, which controls the setting of the Control welding current. The duty cycle that the TE 90 performs is described using the programming parameters. - Synchronous control SCR, welding time regulation by phase cut - Easy programming via 4 buttons - Current surge and pulsing - Single point and automatic - Compensation of the secondary current for welding dirty metal sheets and wires - Welding time locking optimizes power consumption from the mains - Solenoid valve 24 Vdc 7.2 W max. with short-circuit protected output * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9451132

Lagernummer:
1008-9451132
rated capacity:
10,0 kVA 50% ED
welding power:
20,0 kVA max.
contact pressure capacity:
220 daN
throat:
520 mm
ERNST ATLAS ER 1500, Metal Processing, Grinding machines, Wide Band Grinding Machine

ERNST

ATLAS ER 1500

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Wide Band Grinding Machine

** Well maintained condition with lots of accessories ** New price including accessories approx. 180.000 euros ** Special price on request Furnishing : - ERNST dry wide belt sanding machine “TYP ATLAS ER ROTOR” * Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen * Control of the entire system * graphically supported color terminal * Adjustment of the immersion depth of the grinding brushes - Coordinate switch for: * continuous feed speed from the conveyor belt * Continuous adjustment of the material thickness - Material conveyor belt with a vacuum track * Perforation with conical countersinks for better adhesion of the workpieces * minimum workpiece size length 80.0 mm / area 200 cm² - Rotor head for even and strong edge rounding * for flat and profiled workpieces * for foiled and galvanized workpieces * removes sharp edges from punching and laser burrs * Rotation around the rotor axis * 8x counter-rotating brush rollers with sanding lamellas - complete machine documentation machine + accessories Special accessories included: - ERNST electro-motive material supply and discharge conveyor belt - WESCO VARIO CELL type 4.16 extraction system including pipe connections * 7.5 kW fan GCM-4540 incl. pre-separator - lots of new replacement grinding brushes * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238993

Lagernummer:
1008-9238993
work piece width:
1500 mm
plate thickness:
0,8 - 100 mm
Brush width:
490 mm
Brush diameter:
200 mm
A+B Mod. ACO-2, 400 Volt, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-2, 400 Volt

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** MADE IN GERMANY ** Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Lagernummer:
1008-823112
width of the strips:
200 mm
band length:
1490 mm
band speed:
8,0 m/sec
motor:
400 Volt
IBARMIA IBERDRILL B 50, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IBARMIA

IBERDRILL B 50

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Lagernummer:
1008-8104209
Boring power:
50,0 mm
bore capacity in cast iron:
60,0 mm
bore stroke:
230 mm
thread dia.:
bis M 36 M
ALMI AL 12 E, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

ALMI

AL 12 E

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

The advantages at a glance: high productivity, low investment, simple and fast operation, several diameters immediately available and ideal for double corner connections. With the motor-driven pipe notcher AL1-2E you can cut pipes with the Outside diameter Ø 26.9 (3/4?) Ø 33.7 (1?) Ø 42.4 (1_¼ ") Ø 48.3 (1_1 / 2?) and 60.3 (2?) Notch. Furnishing: - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - Required instructions

Lagernummer:
1008-8390102
plate thickness:
5,0 mm
tube diameter:
27,9 - 61,0 mm
motor:
400 Volt
total power requirement:
2,2 kW
IBARMIA IBERDRILL B 60, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IBARMIA

IBERDRILL B 60

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Lagernummer:
1008-8104210
Boring power:
60,0 mm
bore capacity in cast iron:
70,0 mm
bore stroke:
260 mm
table surface area:
600 x 600 mm
SCHROEDER MHSUV 2000/4,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHROEDER

MHSUV 2000/4,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8

Lagernummer:
1008-9325303
sheet width:
2030 mm
plate thickness:
4,0 mm
thickness at "Niro-steel":
2,5 mm
no. of strokes:
34 Hub/min
MAXION BS MK 3, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

MAXION

BS MK 3

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** from a training workshop ** maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103754

Lagernummer:
1008-9103754
Boring power:
32.0 mm
bore capacity in cast iron:
35.0 mm
morse taper:
MK 3
spindle stroke:
120 mm
A + B RB 10 - 3000 Zufuhr, Metal Processing, Saws, Roller tracks / stop systems

A + B

RB 10 - 3000 Zufuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Lagernummer:
1008-8801015
:
3000 mm
Working width:
360 mm
roll diameter:
60,0 mm
weight max. in kg:
900 kg
GECAM EASY T, Other Metal Processing, Other machines, Deburring Machine

GECAM

EASY T

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Deburring Machine

The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Lagernummer:
1008-823118
diameter:
150 mm
workpiece length:
1300 mm
work piece width:
800 mm
max. dia. of grinding wheel:
150 mm
SIEGMUND 28, EXTREME 8.7 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, EXTREME 8.7 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Lagernummer:
1008-8531694
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
200 mm
weight:
1069 kg
BUETFERING PRIMA 4KKTT 13W, Metal Processing, Grinding machines, Wide Band Grinding Machine

BUETFERING

PRIMA 4KKTT 13W

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Wide Band Grinding Machine

Furnishing : - BUETFERING SteelMaster "PRIMA 4KKTT 13W" wet grinding deburring machine * intended for deburring plate-shaped workpieces made of metal (sheet metal) - including 4x units (2x type K / 2x type T) - Station 1+2 = grinding belt = distance primary burr * Endless sanding belt is pneum between tension roller + contact roller. tense * electric motor drive * Connection to the machine is via V-belts * Contact roller diameter.. 200 mm * Sanding belt speed .. 18 m/sec. + 4.5/9.0 m/sec. * Drive power: 11.0 kW + 3.7/7.5 KW - Station 3+4 = disc brush + round brush = removal of secondary burr * consist of wire-equipped and height-adjustable roller/disc brushes * electric motor drive * Connection to the machine is via V-belts * Aggregate 3 = disc brushes .. not 100% equipped * Drive power: 7.5 kW + 7.5 kW - Low tool costs - Use in wet or dry processes - ideal for format sheets - no water stains as the workpiece dries - continuous speed adjustment of the conveyor belt - Ammeter for each station (drive or unit load) - complete machine documentation * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238992

Lagernummer:
1008-9238992
work piece width:
1350 mm
grinding band dimension:
1370 x 1900 mm
band speed:
18.0 / 4.5 / 9.0 m/sek
workpiece height:
0.5 - 120 mm
UNICRAFT SSK 4, Other Machines, Other attachments, Sandblasting Machine

UNICRAFT

SSK 4

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Lagernummer:
1008-8809016
dimensions::
innen 1160 x 870 x 850 mm
Air consumption:
400 - 800 l/min.
air pressure:
3,4 - 8,0 bar
workpiece weight:
max. 150 kg
UNICRAFT SSK 3.1, Other Machines, Other attachments, Sandblasting Machine

UNICRAFT

SSK 3.1

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Lagernummer:
1008-8809015
dimensions::
innen 1160 x 580 x 580 mm
Air consumption:
400 - 800 l/min.
air pressure:
3,4 - 8,0 bar
workpiece weight:
max. 120 kg
BERNARDO MRA-Pro, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

MRA-Pro

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Lagernummer:
1008-8390110
plate thickness:
3,0 mm
tube diameter:
60,0 mm
motor:
230 Volt
total power requirement:
1,1 kW
INDUMASCH VA 200/8, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

INDUMASCH

VA 200/8

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

** from a maintenance workshop ** New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397087

Lagernummer:
1008-9397087
plate thickness:
8,0 mm ST
plate thickness:
5,0 mm VA
table-size:
1000 x 950 mm
blade length:
200 x 200 mm
BERNARDO SOLID 460-1500 DIGI PRO, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SOLID 460-1500 DIGI PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Description: The Solid 460 Pro universal lathe was specifically designed to be economical Manufacture of individual workpieces and small series with high precision designed. Even the basic equipment includes all the important ones Accessories, which make this machine universally applicable. Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed bezel - Passage diam. max. 150mm - Revolving bezel - Passage diam. max. 110mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Slip clutch - Rapid traverse longitudinally and flatly - Interchangeable wheels - 2 centering points - reducing sleeve - Thread clock - LED machine light - Chip back wall - Operating tool

Lagernummer:
1008-8203159
turning length:
1500 mm
turning diameter:
460 mm
swing diameter over bed slide:
270 mm
turning dia. in gap:
690 mm
CIDAN MS M 10/3,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

CIDAN

MS M 10/3,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325126

Lagernummer:
1008-9325126
sheet width:
1050 mm
plate thickness:
3.0 mm
thickness at "Niro-steel":
1.5 mm
no. of strokes:
35 Hub/min
ERMAK EKM 60 TN, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

ERMAK

EKM 60 TN

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Lagernummer:
1008-8411002
pressure:
60,0 t
square edge steel:
35,0 mm
round bar steel:
40,0 mm
L-beam:
120x120x12 mm
AVIA FNC 25 BN, Metal Processing, Milling machines, Universal Milling Machine

AVIA

FNC 25 BN

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

Furnishing : - robust / conventional universal milling machine - Right / left running of the work spindle - Service, front right - rotatable universal milling head - manual milling spindle feed, with locking - Stable T-slot clamping/angle table - foldable milling spindle protection - Coolant device in the machine base

Lagernummer:
1008-9131191
x-travel:
400 mm
y-travel:
310 mm
z-travel:
330 mm
taper in main spindle:
SK 40
UNICRAFT SHT 1000, Other Machines, Other attachments, Lift table

UNICRAFT

SHT 1000

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Lift table

Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Lagernummer:
1008-8531613
weight max. in kg:
1000 kg
table width:
800 mm
stroke height:
190-1010 mm
table length:
1300 mm
ERCOLINA MB 42 M, Metal Processing, Sheet metal working / shaeres / bending, Pipe-Bending Machine

ERCOLINA

MB 42 M

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Pipe-Bending Machine

ERCOLINA MediBender "MB 42 M" - Capacity steel tube 42 x 3.0mm - Gas tube capacity 1"1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - Hex tool holder - Min. outer diameter 5 mm - 1/8" gas Furnishing : - Patented quick tool change system - a bending speed - free-moving footswitch including ERCOLINA microprocessor control: - with 30 programs (0 - 29) - Each program can be programmed with up to 9 bending angles - In addition, in the work mode for each bending angle necessary correction angle must be entered

Lagernummer:
1008-8362016
tube diameter:
42,0 mm Stahl
wall strength:
3,0 mm Stahl
tube diameter:
54,0 mm CU/Alu
wall strength:
2,0 mm
ALZMETALL AB32/SV-RFT 20, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

ALZMETALL

AB32/SV-RFT 20

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** current new price approx. 16,700 euros **Special price on request DRILLING MACHINES HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT RFT 20 Furnishing: - pole-changing motor - Continuous speed adjustment including digital speed display - Spindle feed with electro-magnetic engagement - adjustable spindle feed (mm/rev) - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Cross table with digital display for 1 axis - EMERGENCY stop button at the front - Coolant system without container * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093638

Lagernummer:
1008-9093638
bore capacity in steel (diameter):
32,0 / 40,0 mm
throat:
322,5 mm
bore stroke:
160 mm
threading:
M 24
MEBA 310 GHSS, Metal Processing, Saws, Band Saw

MEBA

310 GHSS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - continuous speed adjustment of the saw band - stepless lowering of the saw frame - Handwheel for saw band tensioning - Stable machine stand in welded construction - Rotary table for miter adjustment - electro-hydraulic material clamping - quick/accurate adjustment of the miter areas - Material support table with surrounding water channel - Clear control panel * for electrical and hydraulic central control - Coolant device * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173356

Lagernummer:
1008-9173356
cutting diameter:
320 mm
capacity 90 degrees: flat:
450 x 220 mm
capacity 45 degrees: round:
300 mm
capacity 45 degrees: flat:
300 x 200 mm
EHT EHPS 15-3550+H500, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

EHPS 15-3550+H500

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual

Lagernummer:
1008-9308302
pressure:
150 t
chamfer lenght:
4050 mm
distance between columns:
3050 mm
column arm:
350 mm
JAESPA - Vollautomat CONCEPT 500/800 PGA NC, Metal Processing, Saws, Band Saw

JAESPA - Vollautomat

CONCEPT 500/800 PGA NC

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** maintained condition (!!) ** current new price approx. 90.000 euros ** Special price on request Fully automatic, NC controlled 2-column band saw machine, for one-sided Miter cuts up to 60 degrees, for industrial use For sawing off solid material, pipes and profiles made of steel and cast iron as well as light and non-ferrous metals and similar materials Furnishing: - electro-hydraulic band saw - fully automatic - swiveling control unit (microprocessor control) - Preselectable working cycles: * Manual = semi-automatic process for individual cuts * Auto = fully automatic process for series cuts - Miter cuts up to 60° left - frequency-controlled, stepless belt drive - electro-hydraulic material clamping - automatic material replenishment via servo motor and rack * unlimited material supply length.. Multiple stroke 9.999,99 mm - Stable support table made of gray cast iron with integrated turntable - automatic detection of the cutting height via detector - Ball-bearing portal to accommodate the saw frame - Particularly easy pivoting of the bracket with hydraulic brake - Saw bow guidance through play-free and low-maintenance guide systems - electro-hydraulic stepless adjustment of the miter angles - Coolant device - Operation manual ** further technical data: - Shortest remaining piece length in automatic mode * at 90° .. 600 mm * at 45° right .. 1400 mm * at 30° left .. 980 mm - smallest diameter to be sawn .. 30.0 mm - shortest remaining piece length in a single cut .. 50.0 mm * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173355

Lagernummer:
1008-9173355
cutting diameter:
500 mm
capacity 90 degrees: flat:
800 x 500 mm
capacity 90 degrees: square:
500 x 500 mm
capacity 45 degrees: round:
500 mm
MEP - Vollautomat COBRA 350 CNC FE, Metal Processing, Saws, Aluminium Circular Saw

MEP - Vollautomat

COBRA 350 CNC FE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

** Machine from a workshop for the disabled ** good condition (!!) Furnishing : - fully automatic aluminum circular sawing machine - with input of section length and number of pieces - swiveling control panel, right front - Miter adjustment 45° left/right - pneumatic material clamping (horizontal+vertical) - programmable feed carriage - Micro spray device (oiler) - Machine base, with forklift pockets - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164095 * Machinevideo : https://www.youtube.com/watch?v=XQqvY6g9Y6U

Lagernummer:
1008-9164095
saw blade diameter:
350 mm
dimensions of saw-blade:
350 x 3.4 x 32 mm
turning speeds:
1700 / 3400 U/min
capacity 90 degrees: round:
120 mm
KNUTH / DURMA HAP 35200, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

KNUTH / DURMA

HAP 35200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display * digital position display for backgauge (X axis) * digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes * Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/foot control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308265

Lagernummer:
1008-9308265
pressure:
200 t
chamfer lenght:
3550 mm
distance between columns:
3050 mm
column arm:
200 mm
DEMA SBM 600/400 E, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

DEMA

SBM 600/400 E

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** New price ~ 4.000 euros ** Special price on request Description : - 6 switchable speeds thanks to powerful motor - Direction switch for clockwise and counterclockwise .. rotation for thread cutting - Solid work table (360° rotatable), pivotable from -90° to +90° - Flexibility thanks to the table and head that can be swiveled on both sides - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Adjustable drilling depth stop, drilling depth can be read using a scale - Stable and ground steel column, designed for heavy use - Start switch: Machine runs continuously - Switch key operation: Machine only runs when the switch is pressed - Extremely smooth running thanks to ground gears in the transmission * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103743 * Machine video : https://www.youtube.com/watch?v=9_modu_1MFk

Lagernummer:
1008-9103743
bore capacity in steel (diameter):
40,0 mm
bore stroke:
130 mm
throat:
285 mm
table::
380 x 460 mm
BERNARDO RD 1600x50, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

BERNARDO

RD 1600x50

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Lagernummer:
1008-8110012
bore capacity in steel (diameter):
50,0 mm
arm length:
350 - 1.590 mm
workpiece height max.:
645 - 1.240 mm
turning speeds:
25 - 2000 U/min
RAS 83.20, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

RAS

83.20

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325338

Lagernummer:
1008-9325338
sheet width:
2040 mm
plate thickness:
3.0 mm
thickness at "Niro-steel":
1.5 mm
no. of strokes:
50 Hub/min
BERNARDO GB 30 Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 30 Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Lagernummer:
1008-8100206
bore capacity in steel (diameter):
32,0 mm
threading:
22 M
bore stroke:
125 mm
throat:
280 mm
SIEGMUND 28 / SONDERSET / 96 tlg., Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28 / SONDERSET / 96 tlg.

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

Description : - Special set for SIEGMUND 28 clamping tables - original SIEGMUND accessories (!!) ** included ** : - 1x 28 mm mobile tool trolley - 30x quick release bolts with short twist lock - 8x universal stop 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° burnished - 16x Professional screw clamp - Nitrided - 6x Professional screw clamp 45°/90° - Nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: - eccentric, Allen key, brush, - other accessories such as: Probe CleanBasic, Probe Non-Stick and burner holder

Lagernummer:
1008-8531702
table length:
unterschiedlich mm
table width:
unterschiedlich mm
table height (lateral area):
unterschiedlich mm
weight:
ca. 240 kg
BERNARDO GB 50 NC Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 50 NC Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

The gear column drilling machine GB 50 NC Vario is standard with a infinitely variable speed control, reducing the cutting speed can be optimally adapted to the workpiece. Because of the heavy, massive It is designed primarily for use by professional users or ideally suited in mechanical engineering or workshops. - Equipped with motorized table height adjustment as standard - 6 automatic drilling feeds switchable via electromagnetic clutch - Hand-scraped drilling table made of solid gray cast iron, swiveling from -45° to + 45 ° - Ground base plate with T-slots - for clamping particularly tall workpieces - Guaranteed concentricity = 0.02 mm, measured in the quill - Automatic tool ejector and thread cutting device as standard - Very smooth running thanks to ground gear wheels running in an oil bath - Stable and polished steel column, designed for heavy use - User-friendly operation via membrane keyboard Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - Motorized table lift - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - First filling with Shell Tellus 46 - LED machine operators - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Lagernummer:
1008-8100288
bore capacity in steel (diameter):
50,0 mm
throat:
360 mm
bore stroke:
220 mm
morse taper:
4 MK
AMADA HFE 50-20, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

AMADA

HFE 50-20

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383 * Machinevideo : https://www.youtube.com/watch?v=lzJmJ7FbpO4

Lagernummer:
1008-9308383
pressure:
50.0 t
chamfer lenght:
2090 mm
distance between columns:
1665 mm
column arm:
400 mm
BERNARDO SB 30 Profi, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

SB 30 Profi

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Lagernummer:
1008-8100269
bore capacity in steel (diameter):
32,0 mm
throat:
230 mm
bore stroke:
120 mm
morse taper:
3 MK
MEP - Halbautomat SHARK 332-1 SXI evo / MDE, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 332-1 SXI evo / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

Lagernummer:
1008-8174117
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
KNUTH KB 1400, Metal Processing, Milling machines, Bed Type Milling Machine - Universal

KNUTH

KB 1400

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Bed Type Milling Machine - Universal

** current new price approx. 60.000 euros ** Special price on request The heavy universal bed milling machine offers wide guides and high Drive power for superior cutting performance and is with your Extensive equipment ideal for plant and mechanical engineering suitable. The heavy vertical milling head can be swiveled right and left, The quill can be moved manually and the spindle speed can be adjusted continuously regulate. The feed in the Y and X axes can be done via a robust Manual transmission can be varied. All axes have rapid traverse and the Large clamping table offers plenty of space for workpieces and clamping devices. It is not the machine table (with the workpiece) that is moved in the Z axis, but rather the milling head - greater stability and lower vibrations lead to more Precision with very high table load capacity! This is further reinforced Effect through the large, heavy gray cast iron frame (Meehanite) and the extremely wide flat guides. Furnishing : - Continuous speed regulation by frequency converter - Rigid right-angle guides guarantee lasting accuracy - Meehanite gray cast iron frame - ± 30° swiveling milling head - Hardened and ground guideways in all axes - The machine is equipped with a 3-axis position display as standard * Greater work accuracy * Lower error rate * Greater manufacturing reliability * Significant time savings * Increased productivity * Easy to read display * User friendly features * Clearly arranged keyboard * Resolution 0.01/0.005mm - Central lubrication - Coolant device - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131205

Lagernummer:
1008-9131205
x-travel:
950 mm
y-travel:
400 mm
z-travel:
500 mm
tool taper:
ISO 50
AMADA HFE 100.3, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

AMADA

HFE 100.3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) ** with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left * Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) * Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) * Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373

Lagernummer:
1008-9308373
pressure:
100 t
chamfer lenght:
3140 mm
distance between columns:
2700 mm
column arm:
420 mm
MEP - Halbautomat SHARK 332-1 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 332-1 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

Lagernummer:
1008-8170067
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
MEP - Halbautomat SHARK 512 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 512 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 60 ° - autom. Saw bow lowering, infinitely adjustable Feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Fig. Shows a similar machine

Lagernummer:
1008-8174106
cutting diameter:
330 mm
capacity 90 degrees: flat:
510 x 320 mm
capacity 90 degrees: square:
320 x 320 mm
capacity 45 degrees: flat:
350 x 320 mm
DURMA MS 2504, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

DURMA

MS 2504

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife

Lagernummer:
1008-9325259
sheet width:
2550 mm
plate thickness:
4,0 mm
distance between columns:
2600 mm
back stop - adjustable:
750 mm
ALZMETALL AB 36 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 36 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** maintained condition (!!) ** current new price approx. 18.000 euros ** Special price on request Furnishing: - electromagnetic feed clutch * with overload protection and electric cross-grip switch - Mushroom push button (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - digital speed display - digital drilling depth display * including 0-point definition (start of drilling) - R / L barrel of the drill spindle - Pole-changing drive motor - infinitely adjustable drilling depth stop - Work table with 2x T-slots - height adjustable - Coolant base plate with machined workpiece support surface * incl. pump with motor protection switch * incl. 2x T-slots - Operating instructions in German * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103755

Lagernummer:
1008-9103755
bore capacity in steel (diameter):
36.0 mm
bore capacity in cast iron:
42.0 mm
throat:
230 mm
morse taper:
4 MK
MEP - Halbautomat SHARK 282 SXI - Evo / MDE, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 282 SXI - Evo / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - optionally manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick

Lagernummer:
1008-8174116
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: flat:
220 x 200 mm
MEP SHARK 282 CCS / MDE, Metal Processing, Saws, Band Saw

MEP

SHARK 282 CCS / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German

Lagernummer:
1008-8174118
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: round:
230 mm
EHT EHPS 20-30, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

EHT

EHPS 20-30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Ausstattung: - elektro-hydraulische CNC Abkantpresse * letzte Pressenprüfung - durchgeführt 2022 - CYBELEC CNC Steuerung - Modell DNC 60 PS (Umbau 2012) - schwenkbare Bedienung, Anbauseite vorne rechts - elektrischer Hinteranschlag, mit Kugelumlaufspindeln (X Achse) - elektrisch-pneumatische Höhenverstellung vom Hinteranschlag (R Achse) - manuelle Matrizenverschiebung, inkl. Matrizenschuh - elektro-hydraulische Oberwerkzeugklemmung - elektro-pneumatische Unterwerkzeugklemmung - EHT - geteilte Oberwerkzeuge - EHT - geteilte Unterwerkzeuge - 1x freibewegliche 2Hand-Fußbedienung - manuelle Zentralschmierung - Schutzgitter seitlich + hinten - Bedienungsanleitung Steuerung + Schaltpläne Maschine * Maschinenlink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308365

Lagernummer:
1008-9308365
pressure:
200 t
chamfer lenght:
3050 mm
distance between columns:
2550 mm
throat:
300 mm
GEKA HYDRACROP 55 SD, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

GEKA

HYDRACROP 55 SD

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** good condition - barely used (!!) ** current new price approx. 18.600 euros ** Special price on request Furnishing: - electro-hydraulic profile steel shear with 4 work stations * Flat steel scissors * Profile steel scissors * Hole punch * Notching station - electrical contact length stop - continuous stroke adjustment - Support table at hole punching & notching station * including sliding stops - 2x freely movable foot switches - Material scraper - side storage options - various accessories - Emergency stop button - Connection cable including 16A plug - Operation manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412173

Lagernummer:
1008-9412173
puncher:
55.0 t
round bar steel:
40.0 mm
square edge steel:
40.0 x 40.0 mm
L-beam:
120 x 120 x 10 mm
MEP - Halbautomat SHARK 382-1 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 382-1 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Control modes: - Manual mode - Semi-automatic dynamic operation - The semi-automatic cut is made by manually approaching the saw bow started in any position by actuating the hand switch - Semi-automatic operation (start / stop position of the saw bow is over the keyboard programmed, vice closes / opens automatically, the saw arch is automatically guided back to the start of the cut)

Lagernummer:
1008-8174105
cutting diameter:
280 mm
capacity 90 degrees: flat:
380 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
300 x 200 mm
GRAULE ZS 200 N, Metal Processing, Saws, Aluminium Circular Saw

GRAULE

ZS 200 N

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

- Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm ** Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Lagernummer:
1008-8164011
saw blade diameter:
520 x Ø 50 mm
cutting diameter:
200 mm
cutting length:
420 mm
Cutting height at 45°:
140 mm
NKO PASOVEC 150/2, Metal Processing, Grinding machines, Belt Grinding Machine

NKO

PASOVEC 150/2

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Stable belt grinding machine with 3.0 KW motor ** with 2x tape speeds ** Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Lagernummer:
1008-823855
width of the strips:
150 mm
band length:
2000 mm
band speed:
29,0 / 14,5 m/sek
grinding width:
460 x 150 Plantisch mm
MEP PH 261-1 HB, Metal Processing, Saws, Band Saw

MEP

PH 261-1 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine, with one. Miter device up to 60 ° - hydraulic, stepless lowering of the saw bow - cuts from 0 ° to 60 ° left - coolant device - hydr. Lowering from the saw frame - autom. Limit shutdown - saw band - workpiece stop - Operating instructions in German

Lagernummer:
1008-8170055
cutting diameter:
225 mm
capacity 90 degrees: flat:
245 x 150 mm
capacity 90 degrees: square:
200 x 200 mm
capacity 45 degrees: flat:
160 x 140 mm
NKO PASOVEC 75/2, Metal Processing, Grinding machines, Belt Grinding Machine

NKO

PASOVEC 75/2

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Stable belt grinding machine with 3.0 KW motor ** with 2x tape speeds ** Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Lagernummer:
1008-823854
width of the strips:
75,0 mm
band length:
2000 mm
band speed:
29,0 / 14,5 m/sek
grinding width:
460 x 75 Plantisch mm
DARLEY EHP 110-31/25, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DARLEY

EHP 110-31/25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** well maintained / good condition (!!) Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control - model DA 58 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC axis adjustment Y1 - Y2 - X axis - CNC electro-motorized back gauge * incl. 2x manually adjustable stop fingers (R+Z axis) - manual table cambering, adjustment via hand crank * including analogue value display - 1x split pointed upper tool (manufacturer UKB) - 1x universal rotating Multi-V die block * incl. 2x chain for hanging in the upper beam - 2x front - adjustable support arms - 1x freely movable 2 hand/foot control - Operating instructions: machine + control (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308384

Lagernummer:
1008-9308384
pressure:
110 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
250 mm
MEP SHARK PH 262 HB, Metal Processing, Saws, Band Saw

MEP

SHARK PH 262 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Compact, manual, powerful workshop double miter band saw - for cuts from 45 ° right to 60 ° left - hydraulic, stepless lowering of the saw bow - coolant device - hydr. Lowering from the saw frame - autom. Limit switch-off - saw band - workpiece stop - Operating instructions in German

Lagernummer:
1008-8174063
cutting diameter:
225 mm
capacity 90 degrees: flat:
245 x 150 mm
capacity 90 degrees: square:
200 x 200 mm
capacity 45 degrees: flat:
160 x 140 mm
ALZMETALL AB 40 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 40 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Lagernummer:
1008-8100400
bore capacity in steel (diameter):
40,0 mm
throat:
300 mm
bore stroke:
160 mm
threading:
M30 in St 60
MEP PH 211-1 HB, Metal Processing, Saws, Band Saw

MEP

PH 211-1 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine with one. Miter device up to 60 ° left - hydr. Lowering of the saw bow, stepless feed adjustment - hacksaw band - Coolant device in the machine frame - Angle stop - Required instructions

Lagernummer:
1008-8170050
cutting diameter:
180 mm
capacity 90 degrees: square:
180 x 180 mm
capacity 90 degrees: flat:
200 x 150 mm
capacity 45 degrees: round:
115 mm
ALZMETALL AX 3 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Lagernummer:
1008-8100381
bore capacity in steel (diameter):
40,0 mm
threading:
M 24 in St 60
throat:
293 mm
bore stroke:
120 mm
MEP SHARK 332 CCS, Metal Processing, Saws, Band Saw

MEP

SHARK 332 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** New price ~ 11.500 euros Furnishing: - automatic lowering of the saw arch, with steplessly adjustable feed - with limit stop at the end of the cut - manual / semi-semi-automatic function selectable - 2x saw band speeds - large bearing turntable, for miter cuts from 45° right - 60° left - Vice manually adjustable on both sides - manual material clamping - 1x saw band - rotating chip removal brush - Control panel - front right - hydraulic pressure cell for saw blade tension * with digital indication of the clamping force - User manual in German * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173340

Lagernummer:
1008-9173340
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
FASTI 904-80-25, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

FASTI

904-80-25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine from a vocational training center (Chamber of Crafts) ** good / well-maintained condition ** with only approx. 1.300 operating hours (!!) Furnishing: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC axis control: Y1 - Y2 - X axis + motorized crowning - electro-motorized & controlled backgauge * with 2x manually movable stop fingers (R+Z axis) - manual upper tool & lower tool clamping - split upper and lower tools - 2x stable, front support arms - movable including mm scale - split upper tool - 1x freely movable 2-hand operation - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - original operating instructions for the control * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308382

Lagernummer:
1008-9308382
pressure:
80.0 t
chamfer lenght:
2550 mm
distance between columns:
2060 mm
ajustment speed:
90.0 mm/sec
AK BEND ASM 140-20/4, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

ASM 140-20/4

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Lagernummer:
1008-8400093
sheet width:
2050 mm
plate thickness:
4,5 mm max.
plate thickness:
4,0 mm anbiegen
roll length:
2050 mm
ALZMETALL ALZSTAR 23/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 23/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Lagernummer:
1008-8100360
bore capacity in steel (diameter):
23,0 mm
throat:
250 mm
bore stroke:
100 mm
morse taper:
2 MK
A+B FASTECH FP 40, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Lagernummer:
1008-8389013
pressure:
40 t
stroke:
285 mm
flat steel:
250 x 24 mm
working feed:
10,0 mm/sec
A+B FASTECH FP 80, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Lagernummer:
1008-8389014
pressure:
80 t
stroke:
285 mm
flat steel:
300 x 25 mm
working feed:
10,0 mm/sec
ALZMETALL AX 4 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 4 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

Lagernummer:
1008-8100382
bore capacity in steel (diameter):
55,0 mm
throat:
300 mm
bore stroke:
120 mm
threading:
M 36 in St 60
A+B FASTECH FP 20, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Lagernummer:
1008-8389012
pressure:
20 t
stroke:
185 mm
flat steel:
200 x 12 mm
working feed:
10,0 mm/sec
ALZMETALL ALZSTAR 30/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 30/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

Lagernummer:
1008-810036
bore capacity in steel (diameter):
30,0 mm
throat:
293 mm
bore stroke:
140 mm
morse taper:
3 MK
BAYKAL APH 3708 x 180, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APH 3708 x 180

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop (!!) Furnishing: - conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) * with 2x manually adjustable stop fingers * Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V universal matrix block - 2x front / sliding support arms - freely movable 2-hand foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308364 * Machine video : https://www.youtube.com/watch?v=9oX5Pqdc18s

Lagernummer:
1008-9308364
pressure:
180 t
chamfer lenght:
3700 mm
distance between columns:
3250 mm
throat:
270 mm
ERMAK CNC HGS 4100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGS 4100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321051
sheet width:
4100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
down holder:
18 Stück
BAYKAL HGL 3100 x 8, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

BAYKAL

HGL 3100 x 8

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329

Lagernummer:
1008-9325329
sheet width:
3060 mm
plate thickness:
8.0 mm
thickness at "Niro-steel":
6.0 mm
distance between columns:
3100 mm
ERMAK SPEED BEND PRO 4.320, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.320

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-830222
pressure:
320 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
REMS UNIMAT 75, Metal Processing, Threading machines, Thread-Cutting Machine

REMS

UNIMAT 75

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

** New price ~ 24.000 euros Furnishing: - high-performance semi-automatic machine - for efficient cutting of bolt and pipe threads. * for industry, metalwork, installation - Large cutting area, fast work and short changeover time - stationary material - rotating tool - Torsion-free, self-centering universal vise - with automatic lubrication cooling - Material vise (self-made) - many replacement cutting jaws (!!) Technical specifications - for bolt threads - 6 to 72 mm, 1/4" to 2 3/4" - for pipe threads - 1/16" to 2 1/2", 16 to 63 mm - Tolerance class according to DIN 13 - "medium" (6 g) - Chamfers - range 7-78mm, chamfered diam. 7 mm, largest chamfer 7 mm Chamfer angle 45° - Shelling - range 7-78mm, shelled diameter 7mm to 63mm - Motor - pole-changing three-phase motor with hollow shaft, 400V, 50 Hz, 2000/2300W, right and left rotation - Cutting head speeds - 70 and 35 rpm Scope of delivery - accessories: 9x.. Bake 4x .. G1/2-3/4 3x.. M10x1.5 6x .. G1/4-3-8 2x .. R1-2½ 1x..M12 2x .. G1-2½ 1x..M8 1x .. M10/IEC 16-50

Lagernummer:
1008-9500771
thread dia.:
Bolzengewinde 6 - 72 mm
thread dia.:
Rohrgewinde 16 - 63 mm
threading length:
kleiner Ø 30 unbegrenzt
turning speeds:
70 / 35 U/min
ERMAK ECO BEND EXPERT 26.80, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 26.80

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Lagernummer:
1008-8308093
pressure:
80 t
chamfer lenght:
2600 mm
distance between columns:
2200 mm
column arm:
250 mm
MEP - Vollautomat TIGER 350 CNC FE, Metal Processing, Saws, Cold Circular Saw

MEP - Vollautomat

TIGER 350 CNC FE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - Fully automatic / vertically guided metal circular saw - with automatic material feed & quantity specification - with miter adjustment via large turntable - 32x cutting programs (quantity and section length) - continuous saw blade lowering - pneumatic material clamping - pivoting operation - Machine base - Safety device for feed device (hood) - many replacement saw blades (approx. 15x pieces) - Cooling device - original instruction manual * Machinevideo : https://www.youtube.com/watch?v=lzhNpAYTeEg

Lagernummer:
1008-9164079
saw blade diameter:
350 mm
cutting diameter:
115 mm
capacity 90 degrees: flat:
180 x 95 mm
capacity 45 degrees: round:
95,0 mm
ERMAK SPEED BEND PRO 4.400, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.400

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308161
pressure:
400 t
chamfer lenght:
4100 mm
distance between columns:
3550 mm
column arm:
510 mm
ERMAK SPEED BEND PRO 3.320, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 3.320

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308143
pressure:
320 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
BERNARDO MASTER 400-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER 400-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 90 mm - Live steady rest - passage diam. max. 70 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - operating tool

Lagernummer:
1008-8203119
turning length:
1000 mm
turning diameter:
400 mm
turning dia. in gap:
560 mm
spindle bore:
52,0 mm
ERMAK POWER BEND PRO 37.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 37.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8308145
pressure:
220 t
chamfer lenght:
3760 mm
distance between columns:
3250 mm
column arm:
410 mm
MEP - Halbautomat SHARK 282 SXI - Evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 282 SXI - Evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - either manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

Lagernummer:
1008-8170047
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: flat:
220 x 200 mm
ERMAK ECO BEND EXPERT 200/3, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 200/3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - FIESSLER AKAS - laser protection in front of the machine - Deer foot upper tool - Universal die block - manual table crowning - Safety device: light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Lagernummer:
1008-8301071
pressure:
200 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
250 mm
SCHECHTL SMT 250 / MA, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHECHTL

SMT 250 / MA

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - extended, extendable support table - freely movable foot switch - Operation manual * Special accessories included: - electro-motorized back gauge with analogue position display * Fine adjustment via handwheel at the front - Sheet metal holding device for thin sheet metal cuts * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325306

Lagernummer:
1008-9325306
sheet width:
2540 mm
plate thickness:
2,0 mm
thickness at "Niro-steel":
1,25 mm
no. of strokes:
34 Hub/min
GILLARDON GB 40 VE, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

GILLARDON

GB 40 VE

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - robust & stable machine construction - continuous speed adjustment - Pole-changing drive motor - electro-magnetic automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop, with fine adjustment - Work table height adjustable using hand crank - machined base plate, including coolant system - Foot switch for function: spindle off - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103745

Lagernummer:
1008-9103745
Boring power:
40.0 mm
bore capacity in cast iron:
50.0 mm
morse taper:
4 Kurzspindel MK
spindle stroke:
200 mm
ERMAK POWER BEND PRO 20.60, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 20.60

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8303217
pressure:
60 t
chamfer lenght:
2100 mm
distance between columns:
1700 mm
column arm:
410 mm
MAXION BS 20, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

MAXION

BS 20

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** Machine from a vocational school (!!) Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103742

Lagernummer:
1008-9103742
bore capacity in steel (diameter):
20,0 mm
bore capacity in cast iron:
25,0 mm
throat:
210 mm
bore stroke:
100 mm
ERMAK POWER BEND PRO 12.40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 12.40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8308135
pressure:
40 t
chamfer lenght:
1270 mm
distance between columns:
1050 mm
column arm:
350 mm
MAXION BT 18, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

MAXION

BT 18

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** Machine from a vocational school (!!) Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Machine base - Connection cable + 16A plug * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093641

Lagernummer:
1008-9093641
bore capacity in steel (diameter):
18,0 mm
bore capacity in cast iron:
23,0 mm
throat:
2250 mm
bore stroke:
100 mm
ERMAK CNC HVR 3100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HVR 3100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8328113
sheet width:
3100 mm
plate thickness:
6,0 mm
distance between columns:
3.100 mm
down holder:
14 Stück
ERMAK CNC HGD 3100-13, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGD 3100-13

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321074
sheet width:
3100 mm
plate thickness:
13,0 mm
thickness at "Niro-steel":
8,0 mm
down holder:
14 Stück
GILLARDON GB 30 V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

GILLARDON

GB 30 V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - robust & stable machine construction - continuous speed adjustment - Thread cutting device up to M36 - Button for R/L running of the work spindle - extended machine column - Pole-changing drive motor - automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Work table height adjustable using hand crank - machined base plate - 3x MK tapping quick-change chucks - separate coolant device - EMERGENCY stop button at the front - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103744

Lagernummer:
1008-9103744
Boring power:
32.0 mm
bore capacity in cast iron:
40.0 mm
spindle stroke:
175 mm
morse taper:
MK 3 Kurzspindel
ERMAK POWER BEND PRO 4.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 4.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-830310
pressure:
220 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
FORMAT TS2-1000-50, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

FORMAT

TS2-1000-50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch

Lagernummer:
1008-9325255
sheet width:
1050 mm
plate thickness:
3,0 mm ST
cutting angle:
2,0 °
stroke max.:
38 p. Min.
ERMAK SPEED BEND PRO 3.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 3.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8302070
pressure:
175 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
BOSCHERT EL 500 Digital, Metal Processing, Stamping press, Punching Press

BOSCHERT

EL 500 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** New price including accessories approx. 30.000 euros ** Special price on request The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y positioned accordingly and the material pushed to the stops. Through Pressing the foot pedal will then punch the hole Features of the machine: • Maintenance-free hydraulic drive • Infinitely variable stroke adjustment • Compact unit • Constant punching force Furnishing: - robust electro-hydraulic hole punch - TRUMPF tool system with many application tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * scanning head integrated in the stops * Energy chains for supply cable to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Staking device for zeroing the axes * Reading accuracy +/- 0.1 mm - Control panel: setup, single and continuous stroke - stepless lifting height adjustment - 1x pallet/box with application tools - freely movable foot switch * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412165

Lagernummer:
1008-9412165
sheet width:
500 mm
plate length:
1000 mm
plate thickness:
max. 6,0 mm
pressure:
28,0 t
ERMAK SPEED BEND PRO 4.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308146
pressure:
135 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
FLOTT SB 23 S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

FLOTT

SB 23 S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103760

Lagernummer:
1008-9103760
Boring power:
23.0 / 28.0 mm
Boring depth max.:
140 mm
Center of spindle to wall or column:
300 mm
Column diameter:
125 mm
ERMAK POWER BEND PRO 4.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 4.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8303203
pressure:
175 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
MEP - Vollautomat SHARK 331-1 NC 5.0 Spider, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 331-1 NC 5.0 Spider

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0° to 60° left - Windows “CE” based MEP 50 control and 7” touch screen display * Simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs each with a maximum of 9999 pieces and a maximum length of 9999 mm - Material feed with stepper motor via ball screw * Single stroke 600mm repeatable to saw any length * Accuracy of ±0.1/600mm - Feeder with protective cover and safety limit switch - Precise adjustment of the cutting feed in mm/min - Positioning of the saw head and movement of the feeder using a joystick - Automatic detection of the start of the cut - Large deflection pulleys, adjustable made of cast steel - Saw band tension with band tension control and display on the display - Carbide band guides for maximum cutting precision - Automatic monitoring of cutting load - Vice with quick adjustment * with replaceable clamping and stop jaws - Large chip tray and coolant container that can be pulled out to the side * Equipped with 2 electric pumps for lubrication and cooling of the saw band * Coolant gun for cleaning the machine - Chip clearing brush for cleaning the saw band - User manual EN Info from the manufacturer: When installing this saw in the network Residual current circuit breaker (FI) should this all-current sensitive and not under 300 mA.

Lagernummer:
1008-8174064
cutting range:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: round:
260 mm
LOTZE K 10 / 1040 x 4,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

LOTZE

K 10 / 1040 x 4,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Machine from a maintenance workshop ** with only approx. 610 operating hours (!!) Furnishing: - heavy / robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.0 KW) - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - 1x side stop - 2x front support arms with T-slot - manual central lubrication - Operating hours counter - Special accessories: 1x set of LOTZE replacement knives * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325309

Lagernummer:
1008-9325309
sheet width:
1040 mm
plate thickness:
4,0 mm
thickness at "Niro-steel":
2,5 mm
blade length:
1100 mm
FLOTT SB 23 S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

FLOTT

SB 23 S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Keyless drill chuck including taper mandrel - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103759

Lagernummer:
1008-9103759
Boring power:
23.0 / 28.0 mm
Boring depth max.:
140 mm
Center of spindle to wall or column:
300 mm
Column diameter:
125 mm
ERMAK SPEED BEND PRO 4.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8302191
pressure:
175 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
BERNARDO TM 36 E / R 1200, Metal Processing, Threading machines, Thread-Cutting Machine

BERNARDO

TM 36 E / R 1200

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

- Includes quick-change chuck - for using taps - for through and blind holes - Schwenbkare motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - Significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes large radius swivel arm - for easy positioning of the tap on the workpiece - High economic efficiency thanks to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change mount according to DIN - Quick change chuck - Electric motor - 90° angle adjustment - Mounting flange **Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: 01-14390) - Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Lagernummer:
1008-8100033
thread dia.:
M6 - M36
turning speeds:
30 - 150 U/min
working area:
max. 1200 R
angle adjustable from - to:
0 - 90 Grad
ERMAK SPEED BEND PRO 47.400, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 47.400

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-8308142
pressure:
400 t
chamfer lenght:
4270 mm
distance between columns:
3780 mm
column arm:
510 mm
ABUS Säulenschwenkkran LS, Other Machines, Other attachments, Pillar Type Swivelling Crane

ABUS

Säulenschwenkkran LS

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Pillar Type Swivelling Crane

Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. ** Fig. Shows a similar crane system

Lagernummer:
1008-8531889
weight max. in kg:
500 kg
arm length:
4000 mm
height:
3425 Unterkante Ausleger
total column height:
4215 mm
JOERG 3926 / 3050 x 1,6 mm, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

JOERG

3926 / 3050 x 1,6 mm

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** Machine from a plumbing or roofing shop Furnishing: - manual folding machine for thin sheet metal processing - split bending upper tool - analogue bending angle display - manual clamping of the upper beam using the side hand lever - manual pivoting movement of the bending beam - including counterweight for easy swivel design - manual backgauge * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355195

Lagernummer:
1008-9355195
sheet width:
3050 mm
plate thickness:
1,60 mm
bending angle max.:
120 °
stroke of upper beam:
50 mm
ERMAK ECO BEND EXPERT 37.160, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 37.160

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Lagernummer:
1008-8308084
pressure:
160 t
chamfer lenght:
3760 mm
distance between columns:
3250 mm
column arm:
250 mm
ALZMETALL AX 3 iTRONIC-V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 iTRONIC-V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100654
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
GILLARDON GLK 600, Other Accessories for Machine Tools, Other accessories for machine tools, Cross-Moving-Table

GILLARDON

GLK 600

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Cross-Moving-Table

** current new price approx. 5.000 euros ** Special price on request Furnishing - robust / solid cross table - from a GILLARDON column drill - machined clamping surface 600 x 325 mm - Longitudinal displacement 400 mm - Transverse displacement path 200 mm *Link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-980272

Lagernummer:
1008-980272
table length:
760 mm
table width:
425 mm
groove width:
22.0 mm
weight:
ca. 85.0 kg
ERMAK CNC HVR 4100-10 HH MONO, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HVR 4100-10 HH MONO

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device * Monoblock design

Lagernummer:
1008-8328130
sheet width:
4100 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
down holder:
28 Stück
ABUS Säulenschwenkkran LS, Other Machines, Other attachments, Pillar Type Swivelling Crane

ABUS

Säulenschwenkkran LS

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Pillar Type Swivelling Crane

Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED ** Fig. Shows a similar crane system

Lagernummer:
1008-8531778
weight max. in kg:
250 kg
arm length:
4000 mm
height:
3425 Unterkante Ausleger
total column height:
4.025 mm
ERMAK POWER BEND PRO 26.100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 26.100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8303218
pressure:
100 t
chamfer lenght:
2600 mm
distance between columns:
2200 mm
column arm:
410 mm
ALZMETALL AX 4 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 4 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Lagernummer:
1008-8100655
bore capacity in steel (diameter):
55,0 mm
throat:
300 mm
bore stroke:
140 mm
morse taper:
4 MK
ZMM - SLIVEN CU 325 / 1000, Metal Processing, Lathes, lathe-conventional-electronic

ZMM - SLIVEN

CU 325 / 1000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing: - robust conventional lead/pull screw lathe - 3-jaw lathe chuck Ø 160 mm type 3204/ DIN6350, BISON - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - rotating bezel - movable tailstock - Foot/spindle brake - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears - User manual (PDF)

Lagernummer:
1008-8203163
turning length:
1000 mm
turning diameter:
325 mm
turning diameter over slide rest:
250 mm
spindle bore:
32.0 mm
ERMAK CNC HGD 3100-10, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGD 3100-10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321061
sheet width:
3100 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
down holder:
14 Stück
FILTOO SIG 230 / BGIA, Metal Processing, Welding machines, Welding Smoke Suction

FILTOO

SIG 230 / BGIA

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Welding Smoke Suction

Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation: 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Lagernummer:
1008-8459706
volume capacity:
1600 m3/h
feed volume:
99,9 %
length:
3.000 Absaugschlauch mm
motor:
230 Volt
HESKA ESB 4, Metal Processing, Saws, Band Saw - Vertical

HESKA

ESB 4

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base

Lagernummer:
1008-9173307
roll diameter:
420 mm
throat:
400 mm
workpiece height:
285 mm
cutting speed:
15 - 1400 m/min
BIGSTONE - Vollautomat CF-260 AW, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** New price ~ 18.000 euros ** very few operating hours (!) Furnishing: - column guided band saw - fully automatic - Fully automatic vise system - Feed unit ensures accurate positioning of the material * Feed length - single stroke : 400 mm - hydraulic vise clamping - hydraulic saw blade tensioning - 34 mm wide band saw blade. - Infinitely variable speed adjustment of the saw band - automatic chip conveyor - Spare bandsaw blades

Lagernummer:
1008-9173297
cutting diameter:
260 mm
saw band length:
3660 x 34 x 1,1 mm
capacity 90 degrees: flat:
280 x 260 mm
vice:
280 mm
GRAULE ZS 135 N, Metal Processing, Saws, Aluminium Circular Saw

GRAULE

ZS 135 N

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

- Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm ** Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Lagernummer:
1008-8161010
saw blade diameter:
350 x Ø 30/40 mm
cutting diameter:
135 mm
cutting length:
430 mm
dimensions of saw-blade:
350x3,0/2,4x40 mm
GRAULE ZS 170 N, Metal Processing, Saws, Aluminium Circular Saw

GRAULE

ZS 170 N

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

- Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm ** Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Lagernummer:
1008-8162010
saw blade diameter:
420 x Ø 40 mm
cutting diameter:
170 mm
cutting length:
410 mm
dimensions of saw-blade:
420x3,2/2,4x40 mm
GILLARDON GSB 32 V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

GILLARDON

GSB 32 V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - robust & stable machine construction - continuous speed adjustment - extended machine column - Pole-changing drive motor - automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Work table height adjustable using hand crank - Taper mandrel including keyless drill chuck * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103746

Lagernummer:
1008-9103746
Boring power:
35.0 mm
bore capacity in cast iron:
40.0 mm
Center of spindle to wall or column:
345 mm
bore stroke:
170 mm
BERNARDO TBS 2060, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TBS 2060

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

- Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Lagernummer:
1008-8355078
sheet width:
2065 mm
plate thickness:
1,20 mm
daylight opening:
mit WZ 35,0 mm
daylight opening:
ohne WZ 60,0 mm
FALKEN DK 1900-200, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DK 1900-200

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371066
pressure:
200 t
stroke:
300 mm
table surface area:
1900 x 440 mm
column travel between the guideways:
1900 mm
AMADA GPX 630, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

AMADA

GPX 630

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** maintained condition (!!) Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line * Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual ** Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks

Lagernummer:
1008-9325317
sheet width:
3050 mm
plate thickness:
6,35 mm
thickness at "Niro-steel":
4,0 mm
down holder:
16 Stück
BERNARDO MASTER 380-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER 380-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool Special accessories included in the price: - 3-axis digital display

Lagernummer:
1008-8203117
turning length:
1000 mm
turning diameter:
380 mm
turning dia. in gap:
490 mm
spindle bore:
51,0 mm
FALKEN DPM 775/30, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 775/30

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371060
pressure:
30 t
stroke:
200 mm
table surface area:
775 x 190 mm
column travel between the guideways:
775 mm
BERNARDO MASTER 180-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER 180-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - underframe - operating tool

Lagernummer:
1008-8203120
turning length:
1000 mm
turning diameter:
360 mm
turning dia. in gap:
480 mm
spindle bore:
51,0 mm
IXION BT 23 ST, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

IXION

BT 23 ST

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** Machine from a vocational school ** very good condition (!!) TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including cabinet door * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093639

Lagernummer:
1008-9093639
bore capacity in steel (diameter):
23,0 / 28,0 mm
throat:
260 mm
bore stroke:
120 mm
spindle taper:
3 MK
A+B ERBEND UFA 1015, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

A+B ERBEND

UFA 1015

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Split upper, lower and rear tool - Height of the upper tool = 100 mm * Division 100/100/100/100/100/100/100/70/60/50/40/30/100 * left + right with horn tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual back gauge 500 mm - mobile

Lagernummer:
1008-8355056
sheet width:
1050 mm
plate thickness:
1,5 mm
daylight opening:
100 mm
bending angle max.:
135 °
PFAFF SILVERLINE, Other Machines, Other attachments, Fork Lift - Manual

PFAFF

SILVERLINE

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Fork Lift - Manual

Furnishing: - with tandem rollers - Nylon fork rollers - Rubber swivel castors - Fork width 160 mm

Lagernummer:
1008-853100
weight max. in kg:
2500 kg
fork length:
1200 mm
height of stroke:
115 mm
fork length:
1200 mm
ZMM - SLIVEN HU 310, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 3x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207331

Lagernummer:
1008-9207331
turning length:
750 mm
turning diameter:
310 mm
centre height:
175 mm
spindle bore:
32,0 mm
HACO PPM 30.150, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPM 30.150

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple NC controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 * Positioning of the back gauge (X) * Positioning of the depth adjustment (Y1+Y2) * Possibility of programming various programs * Storage capacity max. 200 programs - max. 400 sets * Swivel control panel, front left - electro-motorized, stepless depth adjustment (Y1+Y2 axis) - electro-motorized back gauge (X axis) * 2x manually adjustable stop fingers - manual table crowning, including analogue value display - 1x split upper tool set - "HACO" holder - 1x rotating MULTI V die block (lower tool) - side protection device (pivoting doors) - 1x freely movable foot control - 2x front, stable material support arms - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308386

Lagernummer:
1008-9308386
pressure:
150 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
stroke of upper beam:
120 mm
A+B ERBEND UFA 1212, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

A+B ERBEND

UFA 1212

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Split upper, lower and rear tool - Height of the upper tool = 100 mm * Division 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * left + right with horn tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual back gauge 500 mm - mobile

Lagernummer:
1008-8355057
sheet width:
1250 mm
plate width at 30 kg/mm:
2,0 mm ALU
plate thickness:
1,25 mm ST
thickness at "Niro-steel":
0,8 mm VA
SIEGMUND 28, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531704
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
200 mm
weight:
981 kg
ZMM - SLIVEN HU 310, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207330 * Machinevideo : https://www.youtube.com/watch?v=iqU7Bkh6INo

Lagernummer:
1008-9207330
turning length:
750 mm
turning diameter:
310 mm
turning diameter over slide rest:
175 mm
spindle bore:
32,0 mm
KLAEGER BE 90/3, Metal Processing, Sheet metal working / shaeres / bending, Pipe-Bending Machine

KLAEGER

BE 90/3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Pipe-Bending Machine

urnishing: - electro-hydraulic pipe bending machine - various bending shapes included * e.g. bending segment: 3" / 2 1/2" / 2" / 1" - Universally usable for gas, boiling and water pipes - Fast work thanks to electro-hydraulic feed - with tripod stand for safe working - Also ideal for copper pipes and coated pipes - Bends can be produced up to 90° * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9360572

Lagernummer:
1008-9360572
tube diameter:
bis 3 Zoll
piston stroke:
200 mm
motor:
400 Volt
total power requirement:
0,7 kW
ALZMETALL ALZSTAR 40 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 40 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Lagernummer:
1008-8100335
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
ALZMETALL AB 34 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 34 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Lagernummer:
1008-8100320
bore capacity in steel (diameter):
34,0 mm
throat:
300 mm
bore stroke:
160 mm
morse taper:
4 MK
BOSCHERT PB 2575, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BOSCHERT

PB 2575

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit * digital position indicator * Entry of target/actual values possible - Electro-motor backgauge - X axis * Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lateral protective device (door) - 1x dual free-moving footswitch - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308327

Lagernummer:
1008-9308327
pressure:
75,0 t
chamfer lenght:
2620 mm
distance between columns:
2055 mm
column arm:
400 mm
AK BEND AS-M 90-10/3,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

AS-M 90-10/3,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Lagernummer:
1008-840012
sheet width:
1050 mm
plate thickness:
3,3 mm
pre-bending:
3,0 mm
roll length:
1050 mm
HACO HSLX 3025, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

HACO

HSLX 3025

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** good condition - ready to use (!) ** New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 * 200 programs x 127 sets per program * Material library max. 32 materials * programmable positioning from the backgauge * automatic electro-hydraulic cutting gap adjustment * automatic electro-hydraulic cutting angle adjustment * automatic retraction from the backgauge * automatic and manual programming mode * Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra long side stop, with ball rollers - 2x extra long support arms, with ball rollers - foot switch - CE mark/Declaration of Conformity - User manual in German

Lagernummer:
1008-9325155
sheet width:
3020 mm
plate thickness:
25,0 mm
no. of strokes:
4 - 8 Hub/min
back stop - adjustable:
ca. 1250 mm
HESKA ESU 4, Metal Processing, Saws, Band Saw - Vertical

HESKA

ESU 4

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

** Machine from a maintenance workshop ** good condition with special accessories (!!) Furnishing: - Robust electro-motor vertical band saw machine - Frequency-controlled, infinitely variable saw blade drive * Infinitely adjustable via handwheel - Pole-changing drive motor - analog speed display - hydraulic, stepless table feed - Infinitely variable height adjustment of the belt guide, via hand wheel - electrical belt tension monitoring - IDEAL saw band welding machine model BSO, with shears & grinding motor - manually swiveling support table - Machine base - Cooling device - Emergency stop button

Lagernummer:
1008-9173331
roll diameter:
420 mm
throat:
400 mm
workpiece height:
285 mm
cutting speed:
15 - 1400 m/min
ERMAK POWER BEND PRO 3.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 3.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Lagernummer:
1008-8308047
pressure:
135 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
PEDDINGHAUS Hydraulic 280, Metal Processing, Stamping press, Punching Press

PEDDINGHAUS

Hydraulic 280

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Lagernummer:
1008-8412009
punching pressure:
28 t
punching cross-cut in cmm:
31 in 7 mm
round bar steel:
32,0 mm
throat:
250 mm
ERMAK POWER BEND PRO 3.175, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 3.175

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Lagernummer:
1008-8303219
pressure:
175 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
AK BEND AHS 30/10, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 30/10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8400197
sheet width:
3100 mm
plate thickness:
13,0 mm
pre-bending:
10,0 mm
diameter of upper rolls:
300 mm
BERNARDO UWF 110, Metal Processing, Milling machines, Universal Milling Machine

BERNARDO

UWF 110

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** current new price ~ 13.500 euros ** Special price on request The universal milling machine UWF 110 is suitable for this purpose of light and medium-heavy milling work. Thanks to their great Versatility and easy conversion, it can be used in workshops for successfully processing small and medium-sized series be used. Furnishing : - Universal milling head, adjustable to all angle positions - Swivel control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable wedge strips in all 3 axes - Extremely smooth running thanks to ground transmission gears running in an oil bath - Positioning motor for z-axis included in delivery - Standard with automatic table feed in x and y axes - Precise surface machined cross table with T-slots - Digital position display for x, y and z axes included in delivery - various accessories included: * ISO 40 recording with collets * various metal cutters * additional recordings + clamping devices - Operation manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131206

Lagernummer:
1008-9131206
x-travel:
750 mm
y-travel:
250 mm
z-travel:
400 mm
spindle taper ISO:
40 ISO
JAVAC AVALON 65 AIR, Metal Processing, Welding machines, Plasma Cutting Device

JAVAC

AVALON 65 AIR

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Cuts carbon steel, stainless steel, aluminum, copper and more... Cutting - clean and reliable. The air plasma cutting system Avalon 65 Air with integrated compressor is your reliable partner for the demanding use. Make slitting cuts up to with the Avalon 65 Air a material thickness of 35 mm. Properties: - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic arcing properties - CNC connection interface - HF-free arc ignition for increased reliability and low EMF exposure - Manual airflow activation switch to test air pressure set without firing the burner - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, Pilot arc overload - Mobile system with rollers Amenities included : - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Lagernummer:
1008-8459710
cutting range for steel to:
35,0 Trennschnitt mm
cutting range for steel to:
25,0 Qualitätsschnitt mm
capacity at 100%:
61,0 Ampere
cutting medium:
Druckluft
JAVAC AVALON 40.1 PFC, Metal Processing, Welding machines, Plasma Cutting Device

JAVAC

AVALON 40.1 PFC

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Cuts carbon steel, stainless steel, aluminum, copper and more... The AVALON 40.1 PFC is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and ease of use Handling makes them the ideal candidate for trade, workshop and industry. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, pilot arc overload; Amenities included : - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Lagernummer:
1008-8459708
cutting range for steel to:
25,0 Trennschnitt mm
cutting range for steel to:
20,0 Qualitätsschnitt mm
capacity at 100%:
25,0 Ampere
cutting medium:
Druckluft
FALKEN DPM 1040-80, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1040-80

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371062
pressure:
80 t
stroke:
250 mm
table surface area:
1040 x 260 mm
column travel between the guideways:
1040 mm
RAS 82.10, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

RAS

82.10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

** Refurbished - shear blades sharpened ** like New (!!) Furnishing: - manual backgauge 0-550 mm - with analogue measuring scale and magnifying glass - adjustable in front, by adjusting lever - 1x long side stop 850 mm - free-moving footswitch - Scratch protection on support table * Machinevideo : https://www.youtube.com/watch?v=8cb4EqRUxIs

Lagernummer:
1008-9325206
sheet width:
1040 mm
plate thickness:
2,50 mm
no. of strokes:
63 Hub/min
cutting angle:
1,66 °
FALKEN DPM 1070-150, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1070-150

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371064
pressure:
150 t
stroke:
300 mm
table surface area:
1070 x 290 mm
column travel between the guideways:
1070 mm
JAVAC AVALON 40.1 AIR, Metal Processing, Welding machines, Plasma Cutting Device

JAVAC

AVALON 40.1 AIR

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Cuts carbon steel, stainless steel, aluminum, copper and more... The air plasma cutting system Avalon 40.1 Air with integrated compressor is Your reliable partner for demanding applications. Run with the Avalon 40.1 Air cuts up to a material thickness of 18 mm. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, pilot arc overload; Amenities included : - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Lagernummer:
1008-8459709
cutting range for steel to:
18,0 Trennschnitt mm
cutting range for steel to:
14,0 Qualitätsschnitt mm
capacity at 100%:
30,0 Ampere
cutting medium:
Druckluft
FALKEN DPM-K 1070-100, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM-K 1070-100

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371065
pressure:
100 t
stroke:
300 mm
table surface area:
1070 x 315 mm
column travel between the guideways:
1070 mm
MATRIZENBLOCK 4100 x 120 x 120, Other Accessories for Machine Tools, Other accessories for machine tools, Press Brake Tooling

MATRIZENBLOCK

4100 x 120 x 120

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Press Brake Tooling

** brand new die block ** ** List price: 10.738 euros ** V - openings: - 80 mm with infeed rollers - 50 mm with infeed rollers - 35 mm - 22 mm - with suspension screws

Lagernummer:
1008-9803019
length:
4100 mm
height:
120 mm
UNICRAFT SHT 2000, Other Machines, Other attachments, Lift table

UNICRAFT

SHT 2000

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Lift table

Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Lagernummer:
1008-8531614
weight max. in kg:
2000 kg
table length:
1300 mm
stroke height:
190-1010 mm
table width:
800 mm
FALKEN DPM-K 1070-150, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM-K 1070-150

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371069
pressure:
150 t
stroke:
300 mm
table surface area:
1070 x 290 mm
column travel between the guideways:
1070 mm
FALKEN DPM 1040-60, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1040-60

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371061
pressure:
60 t
stroke:
250 mm
table surface area:
1040 x 370 (315) mm
column travel between the guideways:
1040 mm
OMCCA HDTS 2050.10.8, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

OMCCA

HDTS 2050.10.8

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - Robust electro-hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° gradient: * Working length max: 60% * Bending capacity max: 50% - mobile, freely movable operating unit - driven top and side rollers * driven by a central unit * Aggregate = hydraulic motor / epidermal gear / oscillating transmission joints * Rollers in good to very good condition (!!) - digital position indicators for the reels - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - manual central lubrication - User manual (IT) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401252 * Machinevideo : https://www.youtube.com/watch?v=IcoiejfghAU

Lagernummer:
1008-9401252
sheet width:
2050 mm
plate thickness:
10,0 mm
pre-bending capacity:
8,0 mm
upper roll diameter:
220 mm
FALKEN DPM 1070-100, Metal Processing, Presses, Tryout Press - hydraulic

FALKEN

DPM 1070-100

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Lagernummer:
1008-8371063
pressure:
100 t
stroke:
300 mm
table surface area:
1070 x 260 mm
column travel between the guideways:
1070 mm
A+B FASTECH MAX 40, Metal Processing, Sheet metal working / shaeres / bending, Reinforced Steel - Bending Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Reinforced Steel - Bending Machine

Furnishing : - Maximum performance, minimum consumption - hydraulic combined machine for bending and cutting operations * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - Manual and automatic mode selectable - simultaneous bending and cutting operations When the machine is running, - - "ECO mode" = hydraulic pump only runs when the foot switch is actuated - free-moving footswitch - Operation manual Technical specifications : - Steel 45 kg / mm² .. Bend Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bend Ø 20.0 mm / cutting Ø 24.0 mm - Steel 65 kg / mm² .. bend Ø 32.0 mm / cutting Ø 32.0 mm * for 2x pieces - steel 65 kg / mm² .. bend Ø 18.0 mm / cutting Ø 20.0 mm - Steel 85 kg / mm² .. Bend Ø 26.0 mm / cutting Ø 28.0 mm * for 2x pieces - steel 85 kg / mm² .. bend Ø 14.0 mm / cutting Ø 18.0 mm

Lagernummer:
1008-8389015
bending diam. - max.:
36,0 mm ST
cutting thickness max.:
36,0 mm ST
motor:
1450 U/min
oil volume:
32,0 l
BERNARDO MS 75 x 2000 S-2, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 75 x 2000 S-2

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823805
width of the strips:
75 mm
band length:
2000 mm
band speed:
14,5 / 29 m/sek
grinding width:
460 x 75 Plantisch mm
MEP - Halbautomat SHARK 282 SXI - Evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 282 SXI - Evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** Current new price 12.500 euros Furnishing: - semi-automatic band saw machine - with miter device 45° right - 60° left - Microprocessor control EVO to control all functions - with both. Miter device, adjustable via large turntable - either manual or automatic lowering of the saw arch - BI-metal saw band - Cooling device - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Raise the saw frame - Open the vice * Machinevideo : https://www.youtube.com/watch?v=qATZQjTvwnY

Lagernummer:
1008-9173323
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: flat:
220 x 200 mm
FALKEN SLB 15 to. / 1350 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 15 to. / 1350 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm

Lagernummer:
1008-8801023
0:
15.000 kg
height:
790-1350 mm
width:
1200 mm
weight:
~ 65,0 kg
LOTZE TW 3000-10, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

LOTZE

TW 3000-10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Furnishing: - heavy / robust hydraulic guillotine shears - manual & reinforced backgauge * adjustable with hand crank from the front * with analogue position display - Stable support table in front - 2x front support arms - 1x side stop - manual cutting gap adjustment, from the front - Central lubrication - Operation manual

Lagernummer:
1008-9325232
sheet width:
3040 mm
plate thickness:
10,0 mm
no. of strokes:
17 - 30 Hub/min
down holder:
17
TURBO VACUUMENTATION SWL 2800 KGS, Metal Processing, Sheet metal working / shaeres / bending, Vacuum-Lifter
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vacuum-Lifter

** New price ~ 11.000 euros ** Special price on request Furnishing: - Suspension frame with suspension eye for hanging in a hoist hook - Manipulating handle with easy-to-grip manual slide valve - main traverse (length: 2000 mm) - Dimensions "suction plates" .. 2x 720x720 mm .. 1x 615x615 mm - sliding suction plates - "BECKER" vacuum pump * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9803043

Lagernummer:
1008-9803043
carrying capacity:
2800 kg
number of suction cups:
3 Stück
total power requirement:
0,55 / 0,75 kW
weight of the machine ca.:
ca. 300 kg.
HACO PPB 30.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPB 30.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * including analogue depth display - manual backgauge, with analogue position display * adjustable from the front * on ball screws * 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308351

Lagernummer:
1008-9308351
pressure:
135 t
chamfer lenght:
3050 mm
distance between columns:
2550 mm
stroke of upper beam:
130 mm
FALKEN RB 3000x600 - Zufuhr, Metal Processing, Saws, Roller tracks / stop systems

FALKEN

RB 3000x600 - Zufuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red

Lagernummer:
1008-8801028
length:
3.000 mm
height:
ca. 660 - 815 mm mm
width:
600 mm
FALKEN SLB 2 to. / 500 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 2 to. / 500 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg

Lagernummer:
1008-8801027
0:
2.000 kg
height:
500 mm
width:
1200 mm
TRUMPF TrumaBend V50, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TrumaBend V50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine with full equipment (all axes controlled)! Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - Rear safety device (sliding door) - Safety device on the side (pivoting door) - Operation manual * Special accessories included: - TRUMPF tool cabinet including various TRUMPF bending tools * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308349 * Machinevideo : https://www.youtube.com/watch?v=segdogmeOFc

Lagernummer:
1008-9308349
pressure:
50,0 t
chamfer lenght:
1275 mm
distance between columns:
1040 mm
column arm:
410 mm
FALKEN SLB 2 to. / 800 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 2 to. / 800 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg

Lagernummer:
1008-8801026
0:
2.000 kg
height:
800 mm
width:
1200 mm
FALKEN SLB 5 to. / 800 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 5 to. / 800 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg

Lagernummer:
1008-8801024
0:
5.000 kg
height:
800 mm
width:
1200 mm
EHT MULTICUT 10-30, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

EHT

MULTICUT 10-30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292

Lagernummer:
1008-9325292
sheet width:
3050 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
cutting angle adjustment:
0,5 - 2,5 °
FALKEN SLB 5 to. / 500 mm, Other Accessories for Machine Tools, Other accessories for machine tools, axle stand

FALKEN

SLB 5 to. / 500 mm

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
axle stand

Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg

Lagernummer:
1008-8801025
0:
5.000 kg
height:
500 mm
width:
1200 mm
FALKEN RB 2000x600 - Zufuhr, Metal Processing, Saws, Roller tracks / stop systems

FALKEN

RB 2000x600 - Zufuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red

Lagernummer:
1008-8801030
length:
2.000 mm
height:
ca. 660 - 815 mm
width:
600 mm
AK BEND SRH-1000, Metal Processing, Welding machines, Rotary Welding Table

AK BEND

SRH-1000

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

he AK BEND SRH hydraulic weld positioner is great for welding, assembly and maintenance work. The positioning is done via a hydraulic turning and tilting function. Description : - hydraulic turning and tilting function - Fast handling of workpieces - Highest productivity through optimal working position - Lifting, tilting and turning of workpieces in one setting - Low non-productive times by turning components - Highest work performance through pleasant working - Back-friendly work for the user Furnishing : - Stepless speed adjustment - free-moving footswitch - Handheld remote control with 5 meter cable - freely movable control panel with digital speed display - analog angle display

Lagernummer:
1008-8531721
weight max. in kg:
max. 1000 kg
turning speeds:
0,18 - 0,58 U/min
height:
976 - 1436 mm
inclination:
0 - 115 °
BERNARDO GB 28 S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 28 S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Lagernummer:
1008-8100202
bore capacity in steel (diameter):
28,0 mm
threading:
12 M
bore stroke:
130 mm
throat:
250 mm
ERMAK POWER BEND PRO 1270x60 S, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND PRO 1270x60 S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Lagernummer:
1008-8303018
pressure:
60 t
chamfer lenght:
1270 mm
distance between columns:
1000 mm
column arm:
410 mm
RABBA HS 16/1250, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

RABBA

HS 16/1250

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - hydraulic cutting angle adjustment - manual cutting gap adjustment - 2x side stop, with mm scale and T-slot - Foot switch for lifting version - rear sheet metal slide - 2x side/rear protective grilles - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325319

Lagernummer:
1008-9325319
sheet width:
1250 mm
plate thickness:
16.0 mm
thickness at "Niro-steel":
10,0 mm
blade length:
1300 mm
AK BEND APK 81, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 81

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Ausstattung: - elektro-hydraulische Ring-/Profilbiegemaschine - hydraulische Unter-/Seitenwalzenverstellung * für extra kleine Biegeradien - Unter-/Seitenwalze einzel zustellbar - 3x angetriebene Walzen - geteile Walzensegmente - digitale Positionsanzeige der Unter-/Seitenwalzen * Anzeige mit TouchScree Funktion - gehärtete Werkzeugaufnahme (42CrMo4) - Maschinenuntergestell - 2x hydraulisch zustellbare Seitenführungen - horizontaler und vertikaler Arbeitseinsatz möglich - freibewegliches Bedienpult - Manometer / Druckanzeige für die Walzen - CE-Zeichen / Konformitätserklärung - Bedienungsanleitung auf Deutsch

Lagernummer:
1008-840421
I-beam section - upend:
100 x 20 (d 2100) mm
bar material dia. max.:
100 x 3 (d 3000) mm
L-beam:
80x80x8 (d 2000) mm
square material:
50 x 25 x 2 (d 600) mm
FALKEN R1 150x2280, Metal Processing, Grinding machines, Belt Grinding Machine

FALKEN

R1 150x2280

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Lagernummer:
1008-823822
width of the strips:
150 mm
band length:
2280 mm
revolutions per minute:
2880 U/min
roll diameter:
140 / 80 mm
AK BEND APK 101, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 101

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x hydraulically adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German

Lagernummer:
1008-8405559
I-beam section - upend:
120 x 25 (d 1600) mm
bar material dia. max.:
140 x 3 (d 3000) mm
L-beam:
100x100x10 (d 1600) mm
square material:
140 x 40 x 3 (d 4000) mm
MEP SHARK 282 CCS, Metal Processing, Saws, Band Saw

MEP

SHARK 282 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German

Lagernummer:
1008-8170051
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 220 mm
capacity 90 degrees: square:
220 x 220 mm
capacity 45 degrees: round:
230 mm
AK BEND AKM 400 hydr., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 400 hydr.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing : - 3x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Hydraulic adjustment of the top roller, with manometer - Lower shaft with adjustable stop - for the economical production of various types of beads - high accuracy due to precision-bearing shafts - Clearly arranged switching elements - Underframe equipped with storage compartment - powerful drive motor, even under continuous load - Mobile foot switch for right and left rotation

Lagernummer:
1008-8470420
plate thickness:
4,0 mm
throat:
260 mm
distance between roll centers:
132 mm
stroke:
55 Oberwalze mm
BERNARDO PWK 50 F, Metal Processing, Presses, Tryout Press - hydraulic

BERNARDO

PWK 50 F

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Lagernummer:
1008-8370068
pressure:
50 t
stroke:
200 mm
table surface area:
730 x 205 mm
dayligth:
1050 mm
BERNARDO TITAN 660-3000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 660-3000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - change gears - reducing sleeve - Chip back wall - Cable routing via energy chain - operating tool

Lagernummer:
1008-8203100
turning length:
3000 mm
turning diameter:
660 mm
turning dia. in gap:
900 mm
turning diameter over slide:
460 mm
GLASMACHER 200 x 40, Metal Processing, Grinding machines, Polishing Machine

GLASMACHER

200 x 40

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Polishing Machine

Universal grinding bench and polishing bench for trade and industry usable, in a very stable construction, designed for continuous operation Description : - heavy / robust polishing machine - 1x polishing/grinding station - pole-changing motor - Machine base - Connection cable + plug (16A)

Lagernummer:
1008-9238991
wheel diameter:
300 mm
turning speeds:
930 / 1430 U/min
tool taper:
Ø 40,0 mm
total power requirement:
1,3 / 1,7 kW
BERNARDO MS 150 x 2000 S-2, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 150 x 2000 S-2

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823806
width of the strips:
150 mm
band length:
2000 mm
band speed:
14,5 / 29 m/sec
grinding width:
460 x 150 Plantisch mm
FALKEN BT 114 S, Metal Processing, Grinding machines, Belt Grinding Machine

FALKEN

BT 114 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Lagernummer:
1008-823833
width of the strips:
50 mm
band length:
940 mm
band speed:
3 - 22 m/min
turning speeds:
1450 U/min
BERNARDO TITAN 800-3000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 800-3000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 100mm max - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Rapid traverse longitudinal and face - slip clutch - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - LED machine light - Change gears - Reducing sleeve - chip rear wall - Operating tool

Lagernummer:
1008-8203147
turning length:
3000 mm
turning diameter:
800 mm
turning dia. in gap:
1000 mm
turning diameter over slide:
540 mm
BEHRINGER - Halbautomat HBP 310/523 G, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** maintained condition (!!) Furnishing: - electro-hydraulic band saw semi-automatic "2-column guided" - for large cutting areas - including simple miter adjustment left 60° + right 45° - manual miter adjustment including analog miter display - Swivel control panel, front left - Machine can be operated manually / semi-automatically - horizontal and vertical material tension - continuous adjustment of the material tension - continuous adjustment of the saw band speed (14-125 m/min) - continuous feed adjustment of the saw frame - Coolant device - original operating instructions + spare parts list * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173348

Lagernummer:
1008-9173348
cutting range:
310 mm
capacity 90 degrees: flat:
520 x 310 mm
capacity 45 degrees: flat:
RE 260 x 310 mm
capacity 45 degrees: flat:
LI 350 x 310 mm
BERNARDO SMART 410-1500 Vario Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1500 Vario Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool

Lagernummer:
1008-8203151
turning length:
1500 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
A+B TR 1200, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

TR 1200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower

Lagernummer:
1008-8451052
weight max.:
1200 kg.
table turning speeds:
80 - 1600 mm/min.
roll diameter:
200 x 50 mm
workpiece diameter:
20 - 800 mm
BERNARDO UWF 110, Metal Processing, Milling machines, Universal Milling Machine

BERNARDO

UWF 110

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

Furnishing : - Universal milling head, adjustable to all angular positions - Swiveling control panel with ergonomically mounted switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable V-ledges in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Standard with automatic table feed in x and y axes - Precise surface-machined cross table with T-slots - Digital position display for x, y and z axes included in the scope of delivery scope of delivery : - 3-axis digital display ES-12 H with LCD display - LED machine light - coolant device - Central lubrication - counter bearing - Long milling arbor 32 mm - Feed for x- and y-axis - Positioner motor for z-axis - coolant pan - Adjustable guard - operating tool

Lagernummer:
1008-8131011
x-travel:
750 mm
y-travel:
250 mm
z-travel:
400 mm
spindle taper ISO:
40 ISO
COMACA VAR 250/6, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

COMACA

VAR 250/6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - 2x speeds - Inching mode for adjusting the shear blades - 2x adjustable stop rulers - Machined work table, with T-slots - free-moving footswitch - Operation manual

Lagernummer:
1008-9397086
plate thickness:
6,0 mm ST
plate thickness:
4,0 mm VA
table-size:
1200 x 900 mm
blade length:
250 x 250 mm
BEWO CPO 250 LT, Metal Processing, Saws, Cold Circular Saw

BEWO

CPO 250 LT

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing : - manual cross-cut/cold circular saw - for cutting profiles, pipes, solid materials - manual vice with star handle - including miter adjustment - ergonomic control handle - Pole-changing drive motor - 1x BEWO feed roller conveyor - Coolant device - Machine base * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164089

Lagernummer:
1008-9164089
dimensions of saw-blade:
250 mm
cutting range:
80,0 mm
capacity 90 degrees: square:
70 x 70 mm
capacity 45 degrees: round:
80,0 mm
ELUMATEC MGS 73, Metal Processing, Saws, Aluminium Circular Saw

ELUMATEC

MGS 73

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

* current new price ~ 10.000 euros Furnishing : - Versatile use for aluminum and plastic profiles - Swivel range 0°-45° stepless to the left and right - Detents at 15°, 30° and 45° - Stable, ground, continuous support table - with precisely mounted rotary table - Wear-free and quiet multiple V-belt drive - saw blade - Hydropneumatic saw feed - 2-hand operation - Machine with stand - Pneumatic profile clamping device (2x horizontal, 1x vertical)

Lagernummer:
1008-9164047
saw blade diameter:
380 mm
cutting diameter:
120 mm
capacity 90 degrees: square:
90 x 90 mm
capacity 45 degrees: round:
110 mm
BERNARDO UWF 110 Servo - 1000, Metal Processing, Milling machines, Universal Milling Machine

BERNARDO

UWF 110 Servo - 1000

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

The universal milling machine UWF 110 Servo is suitable for the execution of light and medium-heavy milling work. Thanks to their great versatility and It can be used in workshops for machining small and simple conversions medium-sized series can be used successfully. Special features of this The machine is the swiveling work table, the flat guide in the y and z axes and the servo drive for feeds and rapids in all axes. scope of delivery : - 3-axis digital display ES-12 H with LCD display - Tightening spindle M16 - LED machine light - Feed for x, y and z axis - Cooling device - counter bearing - Long milling arbor ISO 40 / 27 mm - Combination milling cutter arbor ISO 40 / 27 mm - Coolant sump - Adjustable guard - Central lubrication for x, y and z axis - Operating tool

Lagernummer:
1008-8131012
x-travel:
1000 mm
y-travel:
360 mm
z-travel:
400 mm
spindle taper ISO:
40 ISO
KASTO - Halbautomat KASTOradial U 10, Metal Processing, Saws, Cold Circular Saw

KASTO - Halbautomat

KASTOradial U 10

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

The KASTOradial U 10 is a semi-automatic vertical circular saw with two Cutting speeds and steplessly adjustable saw feed for the universal use in workshop and production. The machines stands out through precise dovetail guides, robust gears and large cutting area. The easily swiveling upper part enables miter cuts of 45°(-) left and 60° (+) right. The pneumatic material clamping, Infinitely adjustable saw feed with height limitation allow a semi-automatic work cycle using a CE-compliant two-hand safety operation is triggered. Furnishing: - semi-automatic circular miter saw 90 / -45 / +45 / + 60 degrees - Vice with counter-clamping device for low-burr cuts - pneumatic material clamping - Cooling device - Infinitely adjustable saw feed with cutting height limitation - saw blade - Machine base cabinet - roller conveyors - Original operating instructions in German + CD Rom * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164082

Lagernummer:
1008-9164082
saw blade diameter:
350 mm
cutting diameter:
100 mm
dimensions of saw-blade:
350 x 32 x 2,5 mm
height of material-table:
900 mm
EHT MULTISWING 4-32, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

EHT

MULTISWING 4-32

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355199

Lagernummer:
1008-9355199
sheet width:
3200 mm
plate thickness:
4,0 mm
distance between columns:
3300 mm
daylight opening:
OW 400 mm
ALZMETALL AX 3 iTRONIC-V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AX 3 iTRONIC-V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100657
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
HUVEMA HU 360 VAC x 1000, Metal Processing, Lathes, lathe-conventional-electronic

HUVEMA

HU 360 VAC x 1000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** New price ~ 13,500 euros ** Special price on request Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - "NEWALL B60" digital display, front left - 3-jaw chuck Ø 160 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder with 3x inserts - folding steel holder protection - Infinitely variable speed adjustment, with digital speed display - Movable tailstock with live center - Chip protection rear panel - foot brake - 6x machine swing feet - Machine light - EMERGENCY OFF button on the front - Coolant device with container * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207333

Lagernummer:
1008-9207333
turning length:
1000 mm
turning diameter over bed:
356 mm
turning diameter over slide rest:
220 mm
turning dia. in gap:
506 mm
BERNARDO TM 24 BLO / R 1200, Metal Processing, Threading machines, Thread-Cutting Machine

BERNARDO

TM 24 BLO / R 1200

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

- with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange **Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: 01-14390) - Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Lagernummer:
1008-8100034
thread dia.:
M5 - M24
turning speeds:
70 - 200 U/min
working area:
max. 1200 R
angle adjustable from - to:
0 - 90 Grad
KINGSLAND COMPACT 45 HYDRAULIC, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

KINGSLAND

COMPACT 45 HYDRAULIC

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** from a maintenance workshop ** New price ~ 13.000 euros ** Special price on request Furnishing: - electro-hydraulic profile steel shear - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - side support tables - 1x manually adjustable contact length stop - 1x freely movable foot switch - Central lubrication * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412169

Lagernummer:
1008-9412169
punching pressure:
45.0 t
punch diameter:
22 in 15.0 mm
punch diameter:
38 in 8.0 mm
round bar steel:
30.0 mm
ERMAK FIBERMAK SM 6000.4 x 2, Metal Processing, Sheet metal working / shaeres / bending, Laser Cutting Machine

ERMAK

FIBERMAK SM 6000.4 x 2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Laser Cutting Machine

Lagernummer:
1008-8423124
table length:
4000 mm
table width:
2000 mm
burner heads:
Precitec Procutter
x-axis:
4050 mm
EUROMAC MULTI 220/6 R, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

EUROMAC

MULTI 220/6 R

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

** current new price approx. 25.000 euros ** Special price on request Furnishing: - electro-hydraulic notching machine - Multi-functional machine with 2x workstations * 1x notching, 1x bending station * including bending tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x angle stop, adjustable - automatic cutting gap adjustment - freely movable foot switch - Connection cable + 16A plug - Cutting performance: * 6.0 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397094

Lagernummer:
1008-9397094
plate thickness:
6.5 mm
thickness at "Niro-steel":
5.0 mm
angle adjustable from - to:
30 - 140 Grad
no. of strokes:
ca. 50 Hub/min
BEYELER PR6 1500 KN x 3100 MM, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BEYELER

PR6 1500 KN x 3100 MM

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** maintained condition (!!) Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP * numerical CNC control unit * 2D graphical programming & product display * Color screen * Tool & program library * clear and logically structured screen pages * Collision display * Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled underbeam cambering (BEYELER system) - manual upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protection device (protective doors) - various folding/bending tools - 1x freely movable 2 hand/foot control - Operating instructions (PDF) + circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368

Lagernummer:
1008-9308368
pressure:
150 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
405 mm
ERMAK FIBERMAK SM 4000.3 x 1,5, Metal Processing, Sheet metal working / shaeres / bending, Laser Cutting Machine

ERMAK

FIBERMAK SM 4000.3 x 1,5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Laser Cutting Machine

Lagernummer:
1008-8423115
table length:
3000 mm
table width:
1500 mm
laser capacity in Watt:
4.000 Watt
x-axis:
3050 mm
RSA RASAMAX DUO, Other Metal Processing, Other machines, Deburring Machine

RSA

RASAMAX DUO

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Deburring Machine

Description : RASAMAX DUO was specially developed for the fast and reliable developed for deburring straight sheet metal. The deburring machine has two counter-rotating deburring brushes that two offset levels. With this principle, upper and Lower edge of sheet metal deburred simultaneously in one operation. This means up to 50% time savings compared to other methods! RASAMAX DUO is suitable for deburring individual pieces and small series and designed with its robust construction for continuous use. Furnishing: - efficient deburring of straight sheets - for steel, stainless steel, non-ferrous metals

Lagernummer:
1008-9238970
plate thickness:
5,0 mm
turning speed range:
1500 / 3000 U/min
diameter of brush:
250 mm
width of brush:
80 mm
ATLANTIC HPE 36.230, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ATLANTIC

HPE 36.230

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) * Pivoting control panel in front left - CNC electric backgauge (X axis) * with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning * Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control

Lagernummer:
1008-9301533
pressure:
230 t
chamfer lenght:
3600 mm
distance between columns:
3150 mm
column arm:
300 mm
BERNARDO AKPL 1600 x 40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BERNARDO

AKPL 1600 x 40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Lagernummer:
1008-8308158
pressure:
40,0 t
chamfer lenght:
1600 mm
distance between columns:
1200 mm
column arm:
200 mm
MEP SHARK 281 CCS / MDE, Metal Processing, Saws, Band Saw

MEP

SHARK 281 CCS / MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - Miter band saw machine for cuts from 0 - 60 ° left - Quick-release vice - How manual or automatic cut works - with stepless hydr. Feed adjustment - hydraulic saw band tension - Saw band 2,950 x 27 x 0.9 mm - electrical coolant device - Angle stop - Chip removal brush - Operating instructions in German ** Special accessories included: - 1x LUBE Cut microdosing device

Lagernummer:
1008-8174084
cutting diameter:
250 mm
capacity 90 degrees: flat:
280 x 200 mm
capacity 90 degrees: square:
230 x 230 mm
capacity 45 degrees: round:
190 mm
A+B Mod. ACO-45, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-45

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** MADE IN GERMANY ** Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Lagernummer:
1008-823114
width of the strips:
45 mm
band length:
850 mm
total power requirement:
230 Volt
total power requirement:
0,18 kW
BAYKAL HGL 2600/6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

BAYKAL

HGL 2600/6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions * Machinelink: https://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9325326

Lagernummer:
1008-9325326
sheet width:
2560 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
distance between columns:
2600 mm
A+B HGK-5, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

HGK-5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Stable turning The HGK_Series has two synchronously working drive units that are used for ensure continuous rotation with stepless speed control. Of the Roller spacing can be increased and decreased manually using locking pins to achieve a large diameter range of the workpieces. Characteristics: - For rotating and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU castors - Adjustment is via bolts - Remote control Scope of delivery: - 1x controller - 1x driven unit - 1x traveling unit

Lagernummer:
1008-8458504
weight max.:
5000 kg
table turning speeds:
6 - 60 m/h
roll diameter:
250 x 120 mm
workpiece diameter:
250 - 2.800 mm
KNUTH AKS 350, Metal Processing, Saws, Aluminium Circular Saw

KNUTH

AKS 350

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Furnishing: - Aluminum circular saw with manual clamping device - machine base - without saw blade

Lagernummer:
1008-9162078
saw blade diameter:
350 mm
cutting diameter:
120 mm
capacity 45 degrees: flat:
180 x 50 mm
capacity 45 degrees: round:
116 mm
A+B Mod. ACO-1, 220 Volt, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-1, 220 Volt

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** MADE IN GERMANY ** Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Lagernummer:
1008-8231111
width of the strips:
100 mm
band length:
920 mm
band speed:
7 m/sec
loading area:
300 x 150 mm
BERNARDO GOLIATH 660-3000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

GOLIATH 660-3000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

- Versatile applications in general mechanical engineering, production, individual production - The machine bed, cast in one piece, is extremely torsion-resistant and+ low-vibration, which is an essential requirement for accurate turning is fulfilled - Modern main spindle bearing with precision angular contact ball bearings - Central, handy circuit for feeds and threads, with control and pull spindle - Serially with rapid traverse longitudinal and plan to reduce non-productive times - The gears are oversized, hardened and precision ground - The removable bridge allows the machining of workpieces with large diameter - sliding tailstock for taper turning, hand wheel with adjustable Fine scaling (0.02 mm) - Electromechanical foot brake to reduce idle times - Best machining performance even when facing scope of delivery - slip clutch - Rapid traverse longitudinal and face - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 630 mm - Fixed bezel - Passage diam. 250mm max - Revolving bezel - passage diam. 110mm max - 1 center / 1 live center - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - Reducing sleeve - chip rear wall - Operating tool

Lagernummer:
1008-8203152
turning length:
3000 mm
turning diameter:
660 mm
turning dia. in gap:
870 mm
turning diameter over slide:
420 mm
MUBEA KLH 300/610, Metal Processing, Stamping press, Punching Press

MUBEA

KLH 300/610

Kategorie 1:
Metal Processing
Kategorie 2:
Stamping press
Kategorie 3:
Punching Press

** good condition (!!) ** with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412170

Lagernummer:
1008-9412170
pressure:
30.0 t
punching cross-cut in cmm:
30 in 9.0 mm
stroke:
0 - 28.0 mm
column arm:
610 mm
SIEGMUND RP 3000, Metal Processing, Welding machines, Rotary Welding Table

SIEGMUND

RP 3000

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control

Lagernummer:
1008-8531686
weight max. in kg:
3000 kg
turning speeds:
1,7 U/min
height:
max. 1.620 mm
Torque:
Tisch 11.750 Nm
ERMAK CNC HGS 3100-6 HH MONO, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGS 3100-6 HH MONO

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device (monoblock)

Lagernummer:
1008-8321044
sheet width:
3100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
distance between columns:
3100 mm
BERNARDO AK 150, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

AK 150

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

- Notching with a burr-free cut, without deformation of the cut edges - For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm - Body made of high-quality gray cast iron for precise work - Blades made of surface-hardened tool steel Furnishing: - manual notching machine - 2x material stops - Scales support tables - hand lever

Lagernummer:
1008-8392024
plate thickness:
1,50 mm
blade length:
150 x 150 mm
table::
457 x 305 mm
cutting angle:
90 °
HACO PPES 40.135, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

HACO

PPES 40.135

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable * manual windage (Z axis) * manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German * Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.be

Lagernummer:
1008-9301136
pressure:
135 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
stroke:
130 mm
RURACK VS 300, Metal Processing, Saws, Cold Circular Saw

RURACK

VS 300

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

** including 2x heavy / robust roller conveyors (!!) Furnishing : - vertically guided cold circular saw - manual quick-clamping device - manual, stepless saw blade feed - simple & comfortable miter adjustment * Setting: 45-90-45-30° - generously sized gearboxes - 2x cutting speeds - Rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Coolant device - Minimum quantity lubrication device (untested) - Operation manual * Special accessories included: - 1x feed roller conveyor.. L = 2.500 mm / W = 370 mm - 1x discharge roller conveyor with movable stop.. L = 5.000 mm / W = 370 mm * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164090

Lagernummer:
1008-9164090
dimensions of saw-blade:
250-300 x 40.0 mm
cutting range:
95.0 mm
capacity 90 degrees: square:
90 x 90 mm
capacity 90 degrees: flat:
125 x 90 mm
LORCH MIG MAG M 304 *SET*, Metal Processing, Welding machines, Welding Unit

LORCH

MIG MAG M 304 *SET*

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Welding Unit

** LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm² - Pressure reducer with volume and content manometer - gas hose - Basket spool adapter K300 - Mains cable with CEE-16 plug - Manual

Lagernummer:
1008-8455055
welding power:
30 - 290 A (stufenlos)
welding power:
ED 60% 175 A
Wire thickness:
0,6 - 1,2 Stahl mm
Wire thickness:
1,0 - 1,2 ALU mm
BERNARDO B 610 PRO, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

B 610 PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Lagernummer:
1008-8101010
bore capacity in steel (diameter):
32,0 mm
throat:
255 mm
bore stroke:
120 mm
morse taper:
4 MK
ERMAK CNC HGS 3100-6, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGS 3100-6

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321040
sheet width:
3100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
down holder:
14 Stück
LORCH MicorMIG 300 BasicPlus, Metal Processing, Welding machines, Welding Unit

LORCH

MicorMIG 300 BasicPlus

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Welding Unit

** LORCH authorized trader - other models on request Description: - A MIG-MAG system that can also use electrodes. Simply remove the burner, Connect the electrode holder to the additional electrode socket and Select electrode welding in the control panel. Furnishing: - Compact device, gas-cooled with synergy operation - stepless welding current setting - Volt & ampere indicator - 7-stage arc dynamic control - Synergy control - Welding program selection in the feed area - full upgradeability

Lagernummer:
1008-8455052
welding power:
MIG - MAG 30-300 A (stufenlos)
Type of gas:
Mischgas + Co2
Wire thickness:
0,6 - 1,2 Stahl mm
Wire thickness:
1,0 - 1,2 Alu mm
ROLLMAK SME 140-20/4.5, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

ROLLMAK

SME 140-20/4.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** Exhibition machine - unused (!) ** Special price on request ** List manufacturer price: 21.400 euros ** Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds

Lagernummer:
1008-8405573
sheet width:
2050 mm
plate thickness:
4,5 mm max.
plate thickness:
4,0 mm anbiegen
roll length:
2050 mm
OPTIMUM HMS 125, Other Accessories for Machine Tools, Other accessories for machine tools, Vise

OPTIMUM

HMS 125

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Vise

Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable

Lagernummer:
1008-8801004
thickness of jaw:
127 mm
clamping width:
0 - 208 in 3 Stufen mm
clamping capacity:
4000 kg
total power requirement:
manuell kW
ERMAK CNC HGS 2600-8, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGS 2600-8

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8321020
sheet width:
2600 mm
plate thickness:
8,0 mm
thickness at "Niro-steel":
5,0 mm
down holder:
12 Stück
KASTO PSB 280 U, Metal Processing, Saws, Hacksaw

KASTO

PSB 280 U

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Hacksaw

Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Lagernummer:
1008-9182028
cutting diameter:
280 mm
band length:
450 mm
capacity 90 degrees: square:
240 x 240 mm
capacity 90 degrees: flat:
280 x 160 mm
FEIN 90801049000, , ,

FEIN

90801049000

Description : - Safe hanging of device and supply line - in the weightless "state." - constant traction - Tear-proof steel cable

Lagernummer:
1008-9531079
Lifting height:
2000 mm
weight max.:
22 - 32 kg.
weight:
13,5 kg
AK BEND APK 50, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x manually adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German

Lagernummer:
1008-8404204
I - beam section - flat steel:
80 x 16 (d 1200) mm
I-beam section - upend:
50 x 15 (d 1000) mm
L-beam:
50 x 5 (d 1200) mm
round material:
40,0 (d 800) mm
RAGNAR HYDR 5-36, Metal Processing, Threading machines, Thread-Cutting Machine

RAGNAR

HYDR 5-36

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36

Lagernummer:
1008-8104208
thread dia.:
bis M 36 M
turning speeds:
0-100 U/min
thread:
M5 - M36 M
working area:
2050 Rmax.
SAY-MAK SIRM 2050/130, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

SAY-MAK

SIRM 2050/130

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** very good condition (!!) ** current new price ~ 17.000 euros Furnishing: - Electrically driven top and bottom rollers - swing-out top roller, with folding bearing - asymmetrical roller arrangement - manual delivery of the bottom roller, by hand wheel - self-braking main motor - Profile inlets in the rollers - Safety line - free-moving footswitch Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for rear roller

Lagernummer:
1008-9401244
sheet width:
2050 mm
plate thickness:
3,0 mm max.
roll length:
2050 mm
roll diam. toproll:
130 mm
ABUS Säulenschwenkkran LS, Other Machines, Other attachments, Pillar Type Swivelling Crane

ABUS

Säulenschwenkkran LS

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Pillar Type Swivelling Crane

Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. ** Fig. Shows a similar crane system

Lagernummer:
1008-8531890
weight max. in kg:
1000 kg
arm length:
4000 mm
height:
3000 Unterkante Ausleger
total column height:
3790 mm
Abfuhrrollenbahn Digital Mod. A-Abfuhr, Metal Processing, Saws, Roller tracks / stop systems

Abfuhrrollenbahn

Digital Mod. A-Abfuhr

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Roller tracks / stop systems

** MADE IN GERMANY ** Description: - 3000 mm roller and measuring track type Exakt A standard - with digital position indicator el. connection 230 V 50 HZ with power pack - Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm) - Measuring stop can be adjusted from the workplace by means of a hand wheel - with pneumatic brake for fixing the dimensions. - Stable material stop trolley, 12 ball bearings - on a large guide profile. - The stop is adjustable and can be folded back manually. - Basic version of roller and measuring track - in stable steel construction, all versions are stationary - The max.measuring length is the track length minus 450 mm - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with axis Ø 15 mm - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web width: 500 mm, usable roll width 450 mm - Construction height: 880 +/- 60 mm - Color: feet anthracite gray RAL 7016, upper part silver gray RAL 7042 - Attachment side

Lagernummer:
1008-8801001
length:
3000 mm
Wheel width:
500 ( 450 ) mm
work height max.:
880 (+/- 60) mm
V-TRADE BMT 250 V, Metal Processing, Saws, Band Saw

V-TRADE

BMT 250 V

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** very rarely used (!!) Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173350

Lagernummer:
1008-9173350
cutting diameter:
250 mm
capacity 90 degrees: flat:
250 x 450 mm
capacity 45 degrees: round:
190 mm
capacity 45 degrees: square:
250 x 190 mm
HUVEMA - Halbautomat HU 230 DGH, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

** New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User manual in German

Lagernummer:
1008-9173318
cutting diameter:
230 mm
capacity 90 degrees: flat:
320 x 130 mm
capacity 90 degrees: square:
230 x 230 mm
capacity 45 degrees: flat:
230 x 140 mm
BERNARDO SMART 410-1000 Vario Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 Vario Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool

Lagernummer:
1008-8203099
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
BERNARDO SMART 410-1000 Digital, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

SMART 410-1000 Digital

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Revolving steady rest - passage diam. max. 65 mm - coolant device - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - slip clutch - Revolver stop with fine adjustment - Thread clock - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - Operating tool

Lagernummer:
1008-8203008
turning length:
1000 mm
turning diameter:
410 mm
swing diameter over bed slide:
255 mm
turning dia. in gap:
580 mm
KUEHLMITTELEINRICHTUNG im SET, Textile Machines, Looms, Weaving machines, Accessories
Kategorie 1:
Textile Machines
Kategorie 2:
Looms, Weaving machines
Kategorie 3:
Accessories

Furnishing: - with plastic container (10 liters) and flexible hose - 230 V connection

Lagernummer:
1008-8801010
conveying height:
2,5 Meter
coolant capacity:
8,0 l/min
0:
11,0 ltr.
motor:
400 Volt
MB ECO-S300, Metal Processing, Welding machines, Rotary Welding Table

MB

ECO-S300

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Lagernummer:
1008-8459011
table diameter:
500 mm
table load:
300 horizontal kg.
table load:
150 vertikal kg.
swivelling range:
0 - 90 Grad
ALZMETALL AB 50 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 50 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Lagernummer:
1008-810039
bore capacity in steel (diameter):
50,0 mm
throat:
350 mm
bore stroke:
200 mm
threading:
M 42 in St 60
A+B Kreuztisch Modell KT 195, Other Accessories for Machine Tools, Other accessories for machine tools, Cross-Moving-Table

A+B Kreuztisch

Modell KT 195

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Cross-Moving-Table

Properties: for light milling work on table or crevice drilling machines Ground clamping surface Dovetail guide adjustable by means of wedge lines

Lagernummer:
1008-8801012
length:
685 mm
width:
460 mm
height:
115 mm
T-slot - width:
10 mm
FINKEN VH 6-500, Metal Processing, Sheet metal working / shaeres / bending, Vacuum-Lifter

FINKEN

VH 6-500

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vacuum-Lifter

Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Lagernummer:
1008-8531720
carrying capacity:
500 kg.
number of suction cups:
6 Stück
suction cup dia.:
215 mm
0:
8,0 m³/h
MACMOM / INAS M 343 B CNC, Metal Processing, Milling machines, Universal Milling Machine

MACMOM / INAS

M 343 B CNC

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** Original price incl. special accessories ~ 72.000 euros ** Machine was very rarely used (!!) ** with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine ** Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : https://www.youtube.com/watch?v=3dqLbTme81E

Lagernummer:
1008-9131202
x-travel:
400 mm
y-travel:
250 mm
z-travel:
400 mm
tool taper:
ISO 40
UNICRAFT KW 50, Other Machines, Other attachments, Crane

UNICRAFT

KW 50

Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Crane

Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge ** Model with 10 to. Lifting capacity also available

Lagernummer:
1008-8531615
lifting force:
5,0 t
height:
585 mm
width:
230 mm
weight of the machine ca.:
25 kg
BERNARDO SM 250 T, Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

BERNARDO

SM 250 T

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing: - various replacement rollers - hand crank - front stop

Lagernummer:
1008-847529
plate thickness:
1.20 mm
throat:
270 (140) mm
distance between roll centers:
60.0 mm
total power requirement:
manuell kW
SOLID R10, Metal Processing, Boring mills / Machining Centers / Drilling machines, Gang Drilling Machine

SOLID

R10

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Gang Drilling Machine

Furnishing: - V-belt driven bench drill/line drill - with 5x stations - Machined work table, with T-slots - manual spindle feed - Height-adjustable drilling head - Machine base * Machinevideo : https://www.youtube.com/watch?v=n0EUi8w4KaU

Lagernummer:
1008-9093629
bore capacity in steel (diameter):
10,0 / 13,0 mm
throat:
150 mm
bore stroke:
60,0 mm
spindle taper:
B 16
JAECKLE PLASMA 60, Metal Processing, Welding machines, Plasma Cutting Device

JAECKLE

PLASMA 60

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Plasma Cutting Device

Description: - Plasma gas: compressed air - Plasma torch with single connection - high frequency ignition - thermal overload protection - very robust and reliable design - The plasma cutting device JÄCKLE Plasma 60 shines with a very good Price-performance ratio. - This plasma cutter is the ideal system for craft, agriculture, Automotive industry etc .; Furnishing: - with burner model P 70/6 mtr.

Lagernummer:
1008-8455053
cutting range for steel to:
20,0 Trennschnitt mm
cutting range for steel to:
15,0 Qualitätsschnitt mm
capacity at 100%:
60 A
cutting medium:
Druckluft
MEP FALCON 352, Metal Processing, Saws, Cold Circular Saw

MEP

FALCON 352

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - Robust cast iron structure - Gear with bronze wheel and ground / hardened - Steel screw in a special oil bath - Vice with counter-clamping device for - double workpiece clamping - Electric coolant pump for cooling and lubrication of the saw blade Scope of delivery: - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded views - Crane eyes for transport * The machine is delivered without a saw blade Special accessories included: - Base cabinet with door (steel frame)

Lagernummer:
1008-8160021
saw blade diameter:
350 x 32 mm
capacity 90 degrees: round:
115 mm
capacity 90 degrees: square:
100 mm
capacity 90 degrees: flat:
130 x 80 mm
ALZMETALL ALZSTAR 18-T/S, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

ALZMETALL

ALZSTAR 18-T/S

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm * Item no .: 09. 434, - Euro

Lagernummer:
1008-80910
bore capacity in steel (diameter):
18,0 mm
throat:
190 mm
bore stroke:
80 mm
morse taper:
2 Kurzspindel MK
HSP 335 x 7,5, Metal Processing, Presses, Hand-Operated Fly Press

HSP

335 x 7,5

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Hand-Operated Fly Press

Furnishing: - 2-column arbor press - large hand wheel - mechanical spindle locking in front - various tools - machine base

Lagernummer:
1008-9377035
pressure:
7,5 t
distance between columns:
335 mm
dayligth:
400 mm
table hole:
75 mm
PEDDINGHAUS Peddimax 801, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

PEDDINGHAUS

Peddimax 801

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Lagernummer:
1008-9412158
pressure:
80,0 t
punching cross-cut in cmm:
31,0 in 25 mm
shear: flat material:
500x18 / 300x22 mm
L-beam:
150 x 12 mm
DURMA / METALLKRAFT HTBS-T 3100-60, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

DURMA / METALLKRAFT

HTBS-T 3100-60

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop (vehicle construction) ** maintained condition (!!) ** New price ~ 41.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325322

Lagernummer:
1008-9325322
sheet width:
3100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
cutting angle:
2,0 °
KALTENBACH TL 400, Metal Processing, Saws, Aluminium Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Furnishing: - Precise and accident-free work thanks to cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping

Lagernummer:
1008-9164051
saw blade diameter:
400 mm
cutting diameter:
130 mm
capacity 90 degrees: flat:
220 x 90 mm
turning speeds:
3200 U/min
BAYKAL APHS 31.300, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BAYKAL

APHS 31.300

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) * 2D graphic touch screen programming mode * 17" high-resolution color TFT * Complete Windows application suite * Delem Modusys compatibility (module scalability and adaptivity) * USB, peripheral port * Pivoting control unit, front left - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1 - 2x CNC electrically movable stop fingers - Electric crowning controlled by CNC - Safety device behind the machine - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - CE mark / declaration of conformity - Control cabinet, on the left side - Operation manual ** Special accessories included : - WILA hydraulic tool clamping above - WILA hydraulic tool clamping below - 1x CNC controlled bending aid (AP1) - "Parking" area for bending assistance * Machinevideo : https://www.youtube.com/watch?v=lT0APHnn9Js

Lagernummer:
1008-9308242
pressure:
300 t
chamfer lenght:
3100 mm
distance between columns:
2550 mm
column arm:
500 mm
BERNARDO WK 20 FH Pro, Metal Processing, Presses, Tryout Press - hydraulic

BERNARDO

WK 20 FH Pro

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame

Lagernummer:
1008-8371015
pressure:
20,0 t
stroke:
185 mm
table surface area:
170 mm Breite
column travel between the guideways:
510 mm
MB POS-1TW, Metal Processing, Welding machines, Rotary Welding Table

MB

POS-1TW

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Lagernummer:
1008-845905
table diameter:
900 mm
table load:
1.000 kg
turning speeds:
0,12 - 1,2 U/min
swivelling range:
0 - 135 Grad
PANTHER 75/1/4, Metal Processing, Grinding machines, Belt Grinding Machine

PANTHER

75/1/4

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Lagernummer:
1008-8231500
width of the strips:
75 mm
band length:
2.000 mm
band speed:
33 m/sec
grinding width:
75 x 430 mm
BERNARDO GB 35 Vario, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GB 35 Vario

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Lagernummer:
1008-8100264
bore capacity in steel (diameter):
35,0 mm
bore capacity in cast iron:
40,0 mm
throat:
320 mm
threading:
M 24 in Stahl
IMCAR SIHR 6/3, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

IMCAR

SIHR 6/3

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401255

Lagernummer:
1008-9401255
sheet width:
2050 mm
plate thickness:
6,0 mm
pre-bending capacity:
4,0 mm
upper roll diameter:
200 mm
TRUMPF TrumaBend V50, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

TRUMPF

TrumaBend V50

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine with only approx. 24.000 operating hours (!!) ** all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front, movable material support arms - 1x rear safety device (pivoting door) - 1x safety device on the side - left (pivoting door) - 1x safety device on the side - right (loose door) - TRUMPF original operating instructions * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308372

Lagernummer:
1008-9308372
pressure:
50.0 t
chamfer lenght:
1275 mm
distance between columns:
1040 mm
column arm:
410 mm
OMCN Mod. 164 W, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 164 W

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - motor-driven hydraulic workshop press - 2 speeds * Infeed speed 595 mm / min. * Working speed 260 mm / min. - High pressure unit with manometer - Regulating and 3-way valve: feed-idle-return - The receiving table can be adjusted by a winch - Piston made of tempered and chrome-plated special steel - Operating instructions in German

Lagernummer:
1008-8370056
pressure:
100 t
stroke:
310 mm
table surface area:
285 x 1010 mm
dayligth:
1055 mm
OMCN Mod. 164 R / 022 - A, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 164 R / 022 - A

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - with adjustable cylinder - 2 speeds: * 1,600 mm / min feed speed * 180 mm / min. Working speed - Electro-hydraulic press with pressure gauge - Overdrive hydraulic unit - Regulating and three-way valve: * Forward-idle-reverse - Shooting table, adjustable with a screw-in lifting rod - Operating instructions in German

Lagernummer:
1008-8370052
pressure:
100 t
stroke:
310 mm
table surface area:
340 x 1010 mm
dayligth:
1055 mm
BOSCHERT K30-120 MINI S, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BOSCHERT

K30-120 MINI S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Lagernummer:
1008-9397083
:
4,0 mm
:
3,0 mm
:
30 - 120 Grad
blade length:
150 x 150 mm
CMA RAPID DRILL TRD-32 CN 6000, Metal Processing, Boring mills / Machining Centers / Drilling machines, Jig Boring Machine

CMA

RAPID DRILL TRD-32 CN 6000

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Jig Boring Machine

Furnishing : - Welded monoblock steel frame with high rigidity - Modular table made of cast iron with four T18 grooves - 8.4" color touchscreen CNC control - The machine moves via linear guides along all axes - is driven by servo motors (programmable). - Spindle rotation driven by servo motor (programmable) - Spindle BT40 with automatic clamping - External coolant system: pump and tank - automatic tool calibrator CNC OMRON color touch screen control: - Memory up to 999 programs - Programming of coordinates via 3 different menus: * Single hole (random pattern) * Hole grid (single or multi-line) * Flange * 50 programmable zero points - CNC control of all axes (X,Y,Z) - Axis (Z): * Different speeds & workflows programmable * Plate drilling cycle * Drilling cycle for profiles * Thermal drilling cycle * small milling cycle (linear and interpolated X/Y) - Programming ISO standard * Special accessories included: - 4x NEW CMA pneumatic vice * for clamping small, narrow parts as well as large, long parts. * Quick adjustment for the wingspan * Jaw width .. 100 mm * Clamping range (span)..590/600 mm * Support height base/step jaw .. 38/124 mm * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-912404

Lagernummer:
1008-912404
x-travel:
6.000 mm
y-travel:
650 mm
z-travel:
400 mm
spindle diameter:
MAS-403-BT40
A+B Mod. ACO-3, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-3

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** MADE IN GERMANY ** Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Lagernummer:
1008-823113
width of the strips:
300 mm
band length:
2070 mm
band speed:
7,0 m/sec
engine output:
1,5 kW
ERMAK ECO BEND EXPERT 3.160, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

ECO BEND EXPERT 3.160

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes

Lagernummer:
1008-8308097
pressure:
160 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
250 mm
OMCN Mod. 162 W, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 162 W

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - electro-hydraulic press with manometer - 2 speeds - high pressure unit - Regulating and 3-way valve: * Feed - idle - reverse - The receiving table can be adjusted by a winch - Piston made of tempered and chrome-plated special steel - Required instructions

Lagernummer:
1008-8370051
pressure:
50 t
stroke:
260 mm
dayligth:
1135 mm
stroke speed:
215 mm/min
ERCOLINA MediBender 070, Metal Processing, Sheet metal working / shaeres / bending, Pipe-Bending Machine

ERCOLINA

MediBender 070

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Pipe-Bending Machine

Description : - MediBender "070" digital - with maximum bending power steel tube 35 x 2.5 mm - Excellent bending quality with very tight bending radii (from 2 x tube Ø) & Bending angles between 0 ° to 180 ° - Easy handling - High accuracy and reliability - Quick tool change (within a few seconds) - Easy to transport - A huge selection of inexpensive standard tools (metric, gas inch, inch) ** Bending segments available for an extra charge * STAHL bending segment R-82 G-1 "... 308 euros * SLIDING SHOE brass 1 "gas = 33.7mm ... 93 euros

Lagernummer:
1008-8362031
tube diameter:
33,7 x 3,4 GAS mm
tube diameter:
35,0 x 2,5 STAHL mm
bending radius min.:
R10 - R 190 mm
tube diameter:
35,0 x 1,5 EDELST mm
COLCHESTER TRIUMPH V/S 2500, Metal Processing, Lathes, lathe-conventional-electronic

COLCHESTER

TRIUMPH V/S 2500

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a training workshop ** good condition (!) The Colchester Triumph VS is the “all-rounder”. From the heavy cutting This precision machine corresponds to the fine precision finish Requirements from modern tool construction, form construction or training company. Furnishing: - 3 -cheezing - diameter 200 mm, with replacement cheeks - Multifix steel holder, with use - Continuous speed adjustment via electric potentiometer - digital speed display - sliding riding stock - feed key - Coolant pan - Not from button, front - Spanning back wall - User manual (PDF) * Maschinenlink: http://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9207343

Lagernummer:
1008-9207343
turning length:
1250 mm
turning diameter over bed:
400 mm
turning diameter over slide rest:
246 mm
turning speed range:
15 - 2500 U/min
OMCN Mod. P30 SA, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. P30 SA

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - 2 stage press with autom. retreat - fast feed by closing the two handwheels - high pressure by opening the upper handwheel - Shooting table with winch for height adjustment. - Piston made of tempered, chrome-plated special steel - Operating instructions in German

Lagernummer:
1008-8370054
pressure:
30 t
stroke:
190 mm
table surface area:
170 x 695 mm
dayligth:
1000 mm
ALZMETALL ALZSTAR 40 iTRONIC -V, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 40 iTRONIC -V

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Lagernummer:
1008-8100653
bore capacity in steel (diameter):
40,0 mm
throat:
293 mm
bore stroke:
120 mm
morse taper:
3 MK
ERMAK CNC HGS 3100-6 HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGS 3100-6 HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device

Lagernummer:
1008-8321043
sheet width:
3100 mm
plate thickness:
6,0 mm
thickness at "Niro-steel":
4,0 mm
distance between columns:
3100 mm
WEILER COMMODOR, Metal Processing, Lathes, lathe-conventional-electronic

WEILER

COMMODOR

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front - adjustable bed stop - Coolant system including coolant pan - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207345

Lagernummer:
1008-9207345
turning length:
1000 mm
turning diameter over bed:
380 mm
turning diameter over slide rest:
190 mm
number of spindle speeds:
25 - 2000 U/min.
ALMI AL 12 U, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

ALMI

AL 12 U

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

The advantages at a glance: high productivity, low investment, simple and fast operation, several diameters immediately available and ideal for double corner joints. With the AL1-2U pipe notcher, you can cut pipes with outside diameters of Ø 26.9(3/4?) Ø 33.7(1?) Ø 42.4(1_¼”) Ø 48.3(1_1/2?) Ø 60.3(2?) and tubes for Notch zinc spouts with outside diameters from Ø22 to Ø76. Furnishing: - with release comb. f. Zinc runout notches - for tubes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - Bed. Instructions

Lagernummer:
1008-8390101
plate thickness:
5,0 mm
tube diameter:
27,9 - 61,0 mm
motor:
400 Volt
total power requirement:
2,2 kW
KRAMER hVe 65/1000, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

KRAMER

hVe 65/1000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - electro-mechanical three-roll round bending machine - robust electric drive * STROMAG BZFM 63 drive motor - asymmetrical roller arrangement - manual delivery of the side roller - manual delivery of the bottom roller - swing-out top roller - freely movable double foot switch * Right/left rotation of the rollers - side control cabinet * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401269

Lagernummer:
1008-9401269
sheet width:
1050 mm
plate thickness:
1.50 mm
pre-bending:
1.25 mm
diameter of upper rolls:
65.0 mm
DARLEY EHP 50-20/15, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

DARLEY

EHP 50-20/15

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch

Lagernummer:
1008-9308216
pressure:
50,0 t
chamfer lenght:
2050 mm
distance between columns:
1550 mm
dayligth:
320 mm
AK BEND AKM 125 motor., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 125 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing : - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of various types of beads - high accuracy due to precision-bearing shafts - Clearly arranged switching elements - Underframe equipped with storage compartment - powerful drive motor, even under continuous load - Mobile foot switch for right and left rotation

Lagernummer:
1008-847041
plate thickness:
1,25 mm
throat:
250 mm
distance between roll centers:
62,0 mm
engine output:
0,7 kW
JUNG HF 40, Metal Processing, Grinding machines, Surface Grinding Machine

JUNG

HF 40

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Surface Grinding Machine

Furnishing: - compact surface grinding machine - K. JUNG magnetic clamping plate S1 10/25 - Lots of spare grinding wheels - side control panel - K. JUNG sanding dust extraction - additional vice

Lagernummer:
1008-9238942
grinding length:
400 mm
grinding width:
150 mm
workpiece height:
300 mm
turning speed range - stepless:
max. 2800 U/min
ATLANTIC HPTE 40.200, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ATLANTIC

HPTE 40.200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible MultiV - universal die block - rear + side protection - 2x front / robust support arms - free-moving 2-hand / double-foot operation - Operation manual

Lagernummer:
1008-9308224
pressure:
200 t
chamfer lenght:
4100 mm
distance between columns:
3150 mm
stroke - stepless adjustable:
200 mm
KALTENBACH SKL 400, Metal Processing, Saws, Aluminium Circular Saw

KALTENBACH

SKL 400

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Lagernummer:
1008-9164080
saw blade diameter:
400 mm
cutting diameter:
135 mm
capacity 90 degrees: flat:
280 x 70 mm
capacity 90 degrees: square:
120 x 120 mm
RAGNAR HYDR 5-24, Metal Processing, Threading machines, Thread-Cutting Machine

RAGNAR

HYDR 5-24

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

Lagernummer:
1008-8104206
thread dia.:
bis M 24 M
turning speeds:
0-600 / 0-150 U/min
thread:
M5 - M24 M
working area:
2050 Rmax.
FIM / INDUMASCH VERSA 204, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual

Lagernummer:
1008-9397084
plate thickness:
4,0 mm ST
plate thickness:
3,0 mm VA
table-size:
1200 x 780 mm
blade length:
200 x 200 mm
BOMAR - Vollautomat STG 320 GA, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - stepless speed adjustment of the saw band - Handwheel for saw band tension - stable machine stand in welded construction - Rotary table for miter adjustment - Fast / precise setting of the miter areas - Quick release material - Material support table with circumferential water channel - clear control panel * for electrical and hydraulic central control - coolant device - Required instructions

Lagernummer:
1008-9173358
cutting diameter:
320 mm
capacity 90 degrees: flat:
470 x 320 mm
capacity 45 degrees: round:
320 mm
capacity 45 degrees: flat:
300 x 320 mm
RAGNAR HYDR 5-16, Metal Processing, Threading machines, Thread-Cutting Machine

RAGNAR

HYDR 5-16

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug ** Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16

Lagernummer:
1008-8104205
thread dia.:
bis M 16 M
turning speeds:
0 - 600 U/min
thread:
M 5 - M 16 M
working area:
2050 Rmax.
ERMAK MICROBEND 10.40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

MICROBEND 10.40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - controlled axes: Y1 - Y2 - X axis - FIESSLER AKAS laser protection device in front of the machine - Back stop with 2x stop fingers and recirculating ball spindles - Quick change punch holder SYSTEM A - Upper deer foot tool, ground version - Universal die block 60x60 mm with 4V in the die shoe - SIEMENS electrical system - LEUZE light barrier behind the machine - BOSCH / HOERBIGER hydraulic system - 2x front support arms "sliding system" - Double foot switch - CE mark / declaration of conformity

Lagernummer:
1008-8308134
pressure:
40,0 t
chamfer lenght:
1000 mm
distance between columns:
800 mm
column arm:
250 mm
IXION BS 30 AV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

IXION

BS 30 AV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103736

Lagernummer:
1008-9103736
bore capacity in steel (diameter):
32,0 mm
bore capacity in cast iron:
36,0 mm
throat:
280 mm
bore stroke:
150 mm
SIEGMUND MOBILER HUBTISCH 28er, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

MOBILER HUBTISCH 28er

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm

Lagernummer:
1008-8531700
table length:
1200 mm
table width:
800 mm
weight:
177 kg
AK BEND ASM 130-15/4,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

ASM 130-15/4,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Lagernummer:
1008-840009
sheet width:
1550 mm
plate thickness:
4,5 mm
pre-bending:
4,0 mm
roll length:
1550 mm
TECNA 4602 N, Metal Processing, Welding machines, Spot Welding Machine

TECNA

4602 N

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Spot Welding Machine

Furnishing: - Spot welding machine from a training workshop - Welding control TE 90 Mark II Welding control TE 90 is a microprocessor control for single-phase resistance welding machines. The welding controller has the task of To control machine elements, especially the SCR, which controls the adjustment of the control the welding current. The duty cycle that the TE 90 performs is described using the programming parameters. - SCR synchronous control, welding time regulation by phase cut - Simple programming via 4 buttons - Current rise and pulses - Single point and automatic - Secondary current compensation for welding dirty metal sheets and wires - Welding time lock optimizes current draw from the mains - Solenoid valve 24 Vdc 7.2 W max. with output protected against short circuits * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9451131

Lagernummer:
1008-9451131
rated capacity:
16,0 kVA 50% ED
welding power:
35,0 kVA max.
contact pressure capacity:
240 daN
throat:
230 mm
SIEGMUND MOBILER HUBTISCH 16er, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

MOBILER HUBTISCH 16er

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm

Lagernummer:
1008-8531699
table length:
1200 mm
table width:
800 mm
weight:
153 kg
ERMAK CNC HGD 3100-10 HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HGD 3100-10 HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device

Lagernummer:
1008-8328164
sheet width:
3100 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
down holder:
14 Stück
B + H 700/1122 A, Woodworking, Handling, Cupboard with drawers

B + H

700/1122 A

Kategorie 1:
Woodworking
Kategorie 2:
Handling
Kategorie 3:
Cupboard with drawers

Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable

Lagernummer:
1008-880255
:
6 St.
:
100 kg
range L-W-H:
705 x 736 x 1019 mm
weight:
126 kg
BAYKAL HGL 3006, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

BAYKAL

HGL 3006

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment Machinelink: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325

Lagernummer:
1008-9325325
sheet width:
3060 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
distance between columns:
3100 mm
A + B Kippcontainer Mod. 750 - GRUEN, Other Accessories for Machine Tools, Other accessories for machine tools, Tilting Device

A + B Kippcontainer

Mod. 750 - GRUEN

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Tilting Device

For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l ** available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Lagernummer:
1008-8802231
length:
1500 x 740 x 780 innen mm
weight of the machine ca.:
ca. 200 kg.
FALKEN PN 60 - 2, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

FALKEN

PN 60 - 2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Lagernummer:
1008-8392012
plate thickness:
2,0 mm
tube diameter:
60,0 mm
motor:
400 Volt
INDUSTRIEWERKBANK 2000, Tools and industrial equipment, Workshop equipment, Workbenches
Kategorie 1:
Tools and industrial equipment
Kategorie 2:
Workshop equipment
Kategorie 3:
Workbenches

Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available! *********************************

Lagernummer:
1008-980256
:
4 St.
:
2 St.
Plate thickness:
45 mm
table length:
2000 mm
A + B Kippcontainer Mod. 750 - GRAU, Other Accessories for Machine Tools, Other accessories for machine tools, Tilting Device

A + B Kippcontainer

Mod. 750 - GRAU

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Tilting Device

For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l ** available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Lagernummer:
1008-8802232
length:
1500 x 740 x 780 innen mm
weight of the machine ca.:
ca. 200 kg.
A + B Kippcontainer Mod. 750 - BLAU, Other Accessories for Machine Tools, Other accessories for machine tools, Tilting Device

A + B Kippcontainer

Mod. 750 - BLAU

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Tilting Device

For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l ** available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Lagernummer:
1008-8802230
length:
1500 x 740 x 780 innen mm
weight of the machine ca.:
ca. 200 kg.
MEP SHARK 332-1 CCS, Metal Processing, Saws, Band Saw

MEP

SHARK 332-1 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - autom. Saw bow lowering, with infinitely adjustable feed - Limit switch-off at the end of the cut - manual function - built-in coolant device - Large mounted turntable for miter cuts from 45 ° right - 60 ° left - saw band - Chip removal brush - Operating instructions in German

Lagernummer:
1008-8170057
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: flat:
270 x 200 mm
GUALDONI G/61-Z, Metal Processing, Milling machines, Universal Milling Machine

GUALDONI

G/61-Z

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a vocational school (!) Furnishing : - robust / conventional universal milling machine - rotatable / swiveling vertical milling head - Stable T-slot clamping/angle table - automatic table longitudinal movement - Feed range adjustable - 8x steps - Pole-changing drive motor

Lagernummer:
1008-9131193
x-travel:
550 mm
y-travel:
155 mm
z-travel:
350 mm
taper in main spindle:
SK 30 / DIN 2080
KEMPER 82302, Metal Processing, Welding machines, Welding Smoke Suction

KEMPER

82302

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Welding Smoke Suction

The "KEMPER mobile cartridge filter" is designed for the extraction of pollutants that arise during the various electric welding processes. In principle, the device can be used in all work processes in which particulate pollutants, i.e. smoke and dust, are released. However, you should make sure that no "rain of sparks" (e.g. from a grinding process) is sucked into the filter device. Furnishing : - Mobile welding fume extraction or mobile cartridge filter - Suction without suction hose - User manual + wiring diagram (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9451130

Lagernummer:
1008-9451130
volume capacity:
2000 m3/h
feed volume:
99,5 %
compressed air:
4,0 - 6,0 bar
voltage:
380 V
LVD PPBL 135/40, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

LVD

PPBL 135/40

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** from a maintenance workshop ** maintained condition (!!) Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Swivel control panel, front right - electro-motorized back gauge (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2 hand/foot control - 2x front support arms - Protective device on the side + behind the machine - Operating instructions + circuit diagram (FR) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370

Lagernummer:
1008-9308370
pressure:
135 t
chamfer lenght:
4050 mm
distance between columns:
3150 mm
throat:
200 mm
SCHECHTL SMT 200, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

SCHECHTL

SMT 200

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - 1x stable side stop - 2x front stable support arm - freely movable foot switch - Operation manual * Special accessories included: - electro-motorized back gauge with analogue position display * Fine adjustment via handwheel at the front - Sheet metal holding device for thin sheet metal cuts * Machinevideo : https://www.youtube.com/watch?v=YyheabfaB-c

Lagernummer:
1008-9325080
sheet width:
2020 mm
plate thickness:
2,5 mm ST
plate thickness:
3,5 mm ALU
distance between columns:
2100 mm
GUALDONI G 61 Z, Metal Processing, Milling machines, Universal Milling Machine

GUALDONI

G 61 Z

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a vocational school (!) Furnishing : - robust / conventional universal milling machine - rotatable / swiveling vertical milling head - Stable T-slot clamping/angle table - automatic table longitudinal movement - Feed range adjustable - 8x steps - Pole-changing drive motor - 1x dividing head with jaw chuck

Lagernummer:
1008-9131194
x-travel:
550 mm
y-travel:
155 mm
z-travel:
350 mm
taper in main spindle:
SK 30 / DIN 2080
INDUMASCH 200 H, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke

Lagernummer:
1008-9397077
plate thickness:
4,0 mm
thickness at "Niro-steel":
3,0 mm
blade length:
200 mm
angle adjustable from - to:
30 - 120 Grad
ERMAK SPEED BEND PRO 3.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 3.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Lagernummer:
1008-8308149
pressure:
220 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
410 mm
BERG & SCHMID VELOX 350 MAN, Metal Processing, Saws, Aluminium Circular Saw

BERG & SCHMID

VELOX 350 MAN

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Furnishing: - Aluminum circular saw machine - 1x HM circular saw blade - Double miter device left + right 45 ° - Head swivel cuts up to 45 ° * Cutting area around 90 ° = 65.0 mm - manual material tension - machine base

Lagernummer:
1008-9164061
saw blade diameter:
350 x Ø 32 mm
turning speeds:
1800 / 3600 U/min
capacity 90 degrees: round:
120 mm
capacity 90 degrees: flat:
200 x 88 mm
FLOTT SB 30 STV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

FLOTT

SB 30 STV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing : - Column drilling machine - Drive: V-belt - continuous speed adjustment via “VARIO drive” - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop with mm scale - Coolant device with container - Connection cable + 16A plug * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103740

Lagernummer:
1008-9103740
bore capacity in steel (diameter):
32,0 mm
bore capacity in cast iron:
36,0 mm
throat:
280 mm
bore stroke:
150 mm
KASTO - Halbautomat GKS 400 U, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - semi-automatic underfloor saw - with miter adjustment, swiveling left / right - hydraulic, vertical & horizontal clamping device - large work table - stepless feed from the saw blade - saw blade - machine base

Lagernummer:
1008-9164059
saw blade diameter:
400 / 425 x 40 mm
cutting diameter:
40 - 180 mm
cutting speed:
14/28 m/min
capacity 90 degrees: flat:
260 x 80 mm
ERMAK CNC HVR 3100-13, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HVR 3100-13

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Lagernummer:
1008-8323029
sheet width:
3100 mm
plate thickness:
13,0 mm
thickness at "Niro-steel":
8,0 mm
down holder:
14 Stück
A+B BDV 3,0 T, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

BDV 3,0 T

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control for setting the speed and clockwise - counter clockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Lagernummer:
1008-8458501
weight max.:
3000 kg.
table turning speeds:
120 - 1200 mm/min.
roll diameter:
250 x 75 mm
workpiece diameter:
150 - 2000 mm
FEIN GRIT GX 75, Metal Processing, Grinding machines, Belt Grinding Machine

FEIN

GRIT GX 75

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Lagernummer:
1008-823104
width of the strips:
75,0 mm
band length:
2.000 mm
band speed:
30 m/sec
grinding width:
75 x 430 mm
FASTI 106-20-2.0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FASTI

106-20-2.0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - robust electro-mechanical three-roller drive - Driven by spur gear brake motor + countershaft - asymmetrical roller arrangement - electrical delivery of the rear roller * with automatic electrical switch-off * Setting min./max. travel distance possible - Rotatable control panel, front right - swing-out top roller, with folding bearing - Conical bending device - freely movable double foot switch * Right/left rotation of the rollers - Manual delivery of the bottom roller using a handwheel * with analogue position display - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401265

Lagernummer:
1008-9401265
sheet width:
2040 mm
plate thickness:
2.5 mm
pre-bending:
2.0 mm
diameter of upper rolls:
110 mm
FEIN GRIT GIS 150, Metal Processing, Grinding machines, Belt Grinding Machine

FEIN

GRIT GIS 150

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Lagernummer:
1008-823821
width of the strips:
150 mm
band length:
2.000 mm
revolutions per minute:
3.000 U/min
engine output:
4,0 kW
A+B BDV 1,0 T, Metal Processing, Sheet metal working / shaeres / bending, Vessel Turning Unit

A+B

BDV 1,0 T

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Vessel Turning Unit

Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control (3 meters) to set the speed and right / Counterclockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Lagernummer:
1008-8458503
weight max.:
1000 kg
table turning speeds:
180 - 1800 mm/min.
roll diameter:
200 x 50 mm
workpiece diameter:
50 - 1500 mm
ERMAK CNC HVR 3100-6 HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ERMAK

CNC HVR 3100-6 HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device

Lagernummer:
1008-8328127
sheet width:
3100 mm
plate thickness:
6,0 mm
distance between columns:
3.100 mm
down holder:
14 Stück
ATLANTIC XTS 3000, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ATLANTIC

XTS 3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325328

Lagernummer:
1008-9325328
sheet width:
3050 mm
plate thickness:
6.0 mm
cutting angle:
0.5 - 3.0 °
down holder:
18 Stück
MEP - Halbautomat TIGER 370 SX, Metal Processing, Saws, Cold Circular Saw

MEP - Halbautomat

TIGER 370 SX

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

** New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

Lagernummer:
1008-9164064
cutting diameter:
120 mm
saw blade diameter:
370 mm
vice:
190 mm
capacity 90 degrees: flat:
180 x 95 mm
SCHROEDER SPB 3200/3,0, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

SCHROEDER

SPB 3200/3,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** current new price ~ 220.000 euros ** from a maintenance workshop Furnishing: - Motorized universal folding machine * high-precision mechanics with modern control technology * for single and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - rotating upper beam / as an automatic tool changing system * with 2x tool stations (sharp and goat's foot bending rail) * Reduces set-up and idle times * Saves time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * with touchscreen control panel, swiveling front right * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation * Windows XP operating system * Swivel control, right front - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. - with divided / rear sheet metal support surface, including ball transfer units - Free-moving double foot switch - original instruction manual ** Special accessories included : - 1x 30° upper tool sharpening rail - 1x divided set upper tool goat foot rail - rear side stop (workpiece guide) - rear sheet metal support table made of stainless steel, with ball rollers - Pneumatically lowerable backgauge fingers - CNC motorized lower beam adjustment * Machinevideo : https://www.youtube.com/watch?v=6BV1k5KMoJo

Lagernummer:
1008-9355158
sheet width:
3220 mm
plate thickness:
3,0 mm ST
thickness at "Niro-steel":
2,0 mm
daylight opening:
OW 300 mm
KUNZMANN WF 4/3 TNC 124, Metal Processing, Milling machines, Universal Milling Machine

KUNZMANN

WF 4/3 TNC 124

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control ** Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Lagernummer:
1008-9131162
x-travel:
400 mm
y-travel:
350 mm
z-travel:
400 mm
tool taper:
SK 40
EISELE - Halbautomat VMS 350 PV, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) ** Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Lagernummer:
1008-9164078
dimensions of saw-blade:
350 x Ø 40 x 3 mm
cutting range:
120 mm
capacity 90 degrees: square:
100 x 100 mm
capacity 90 degrees: flat:
170 x 100 mm
MEP - Halbautomat SHARK 310 SX, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 310 SX

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - semi-automatic 90 degree band saw - continuous lowering of the saw bow - pneumatic vice, with foot switch - Continuous clamping pressure adjustment from the vice - Machine base - Instruction manual (PDF format) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173327 * Machinevideo : https://www.youtube.com/watch?v=bEyN5tqgSAo

Lagernummer:
1008-9173327
cutting diameter:
250 mm
saw band length:
2835 x 27 x 0,9 mm
table height:
800 mm
band speed:
36 / 72 m/min
HESSE MSM 2030 x 1,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

HESSE

MSM 2030 x 1,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401257

Lagernummer:
1008-9401257
sheet width:
2030 mm
plate thickness:
1,0 mm
roll length:
2050 mm
roll diameter:
Ø 95,0 mm
MB PRO 1, Metal Processing, Welding machines, Rotary Welding Table

MB

PRO 1

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Lagernummer:
1008-845900
total power requirement:
230 Volt
table diameter:
300 mm
table load:
100 Horizontal kg
swivelling range:
0 - 90 Grad
SCHROEDER MPB 3200/2,0, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

SCHROEDER

MPB 3200/2,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Motorized universal folding machine * for single and series production - rotating upper beam / as an automatic tool changing system * Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 * with touch screen control panel (without function) * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : * Station 1: 1x pointed rail * Station 2: 1x split goat foot tool - Free-moving double foot switch - Operation manual * Machinevideo : https://www.youtube.com/watch?v=2sxnch6uZa4

Lagernummer:
1008-9355169
sheet width:
3220 mm
plate thickness:
2,0 mm
daylight opening:
160 mm
adjustment:
80,0 mm
VDF HEIDENREICH & HARBECK HAMBURG 430, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a workshop for the disabled (!!) Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray

Lagernummer:
1008-9207336
turning length:
1000 mm
turning diameter over bed:
430 mm
turning diameter over slide rest:
235 mm
spindle turning speed range:
11.2 - 2000 U/min
MB PRO 2 COM 1802, Metal Processing, Welding machines, Rotary Welding Table

MB

PRO 2 COM 1802

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Lagernummer:
1008-8459010
table diameter:
340 mm
table load:
160 horizontal kg.
table load:
100 vertikal kg.
swivelling range:
0 - 90 Grad
BERG SCHMID - Halbautomat GBS 270, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - semi-automatic band saw, with miter adjustment - Miter adjustment via large turntable - 2x saw band speeds - Stepless lowering of the saw frame - hydraulic material clamping - Machine base - 3x feed roller conveyor included - User manual (PDF format) * Machinevideo : https://www.youtube.com/watch?v=hzglTDi4Epw

Lagernummer:
1008-9173335
cutting diameter:
270 mm
saw band length:
3435 x 27 x 0,9 mm
table height:
940 mm
band speed:
35 + 70 m/min
VDF HEIDENREICH & HARBECK HANSEAT 640, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** from a maintenance workshop - good condition (!!) ** Machine was checked annually Furnishing: - heavy - robust lead/pull spindle machine - "WERNER GARANT" face plate Ø 500 mm - HEIDENHAIN digital display - type ND 730 - MULTIFIX steel holder, with 3x inserts - "FINN SAFETY" lining protection - type SPS 600 - movable tailstock - Machine light - 1x food key - Chip back wall - movable bed stop - 2x EMERGENCY STOP switches - Coolant system, with collecting tray * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207337

Lagernummer:
1008-9207337
turning length:
1000 mm
turning diameter over bed:
640 mm
turning diameter over slide rest:
380 mm
spindle turning speed range:
9.0 - 1800 U/min
ZMM / HUVEMA HU 310 VAC, Metal Processing, Lathes, lathe-conventional-electronic

ZMM / HUVEMA

HU 310 VAC

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** New price ~ 23.000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Lagernummer:
1008-9207305
turning length:
750 mm
turning diameter:
310 mm
turning diameter over slide rest:
175 mm
spindle bore:
32,0 mm
VEB MIKROMAT DLZ 315x500/3eG, Metal Processing, Lathes, lathe-conventional-electronic

VEB MIKROMAT

DLZ 315x500/3eG

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Refurbished and repainted in 2013 ** Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Lagernummer:
1008-9207319
turning length:
600 mm
turning diameter over bed:
360 mm
turning diameter over slide rest:
190 mm
bed width:
295 mm
BOSCHERT K30-120 MINI S, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BOSCHERT

K30-120 MINI S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

** Machine like NEW (!!) Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093

Lagernummer:
1008-9397093
:
4,0 mm
:
3,0 mm
:
30 - 120 Grad
blade length:
150 x 150 mm
QUANTUM D 460-1500 E, Metal Processing, Lathes, lathe-conventional-electronic

QUANTUM

D 460-1500 E

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Machine from a maintenance workshop ** current new price ~ 17.500 euros ** Special price on request Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RÖHM 3-jaw chuck, including replacement jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 2x inserts - movable tailstock, with rotating center center - universally adjustable machine light - Chip protection back wall - EMERGENCY stop button at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207346

Lagernummer:
1008-9207346
turning length:
1500 mm
turning diameter over bed:
460 mm
turning diameter over slide rest:
240 mm
turning dia. in gap:
650 mm
MG AK 206 P, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

MG

AK 206 P

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** New price ~ 45.000 euros ** from a maintenance workshop ** rarely used (!!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions

Lagernummer:
1008-9401219
sheet width:
2050 mm
plate thickness:
6,0 mm
pre-bending:
4,0 mm
diameter of upper rolls:
160 mm
MG AK 206 P, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

MG

AK 206 P

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** New price ~ 48.000 euros ** from a repair workshop - good condition (!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions

Lagernummer:
1008-9401218
sheet width:
2050 mm
plate thickness:
6,0 mm
pre-bending:
4,0 mm
diameter of upper rolls:
160 mm
GASPARINI PBS CB 165/3000, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

GASPARINI

PBS CB 165/3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine in good / well-maintained condition (!!) Furnishing: - DELEM CNC control - model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPARINI hydraulic lower tool clamping - many insert/bending tools (punches + matrices) - 1x freely movable 2 hand / foot control - 2x front stable support arms - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - original operating instructions + spare parts list (DE) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308355

Lagernummer:
1008-9308355
pressure:
165 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
450 mm
KINGSLAND MULTI 80 HYDRAULIC, Metal Processing, Sheet metal working / shaeres / bending, Section Steel Shear

KINGSLAND

MULTI 80 HYDRAULIC

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Steel Shear

** New price ~ 24.000 euros ** Special price on request Furnishing: - electro-hydraulic profile steel shears with a large radius - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - KINGSLAND electrical contact length stop - Protective devices at workstations - 2x freely movable foot switches - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412168

Lagernummer:
1008-9412168
punching pressure:
80.0 t
punch diameter:
28 x 20.0 mm
punch diameter:
57 in 9.0 mm
throat:
320 mm
FALKEN RM 1550 x 90 motor., Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RM 1550 x 90 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device

Lagernummer:
1008-8405557
sheet width:
1550 mm
plate thickness:
2,0 mm
roll diam. toproll:
90,0 mm
engine output:
1,5 kW
KASTO - Vollautomat SBA 280 AU, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Furnishing: - fully automatic metal band saw - hydraulic material clamping - Single stroke 6 - 600 mm / multiple stroke max. 9,999 mm * Manual setting of the section length using the handwheel * with quantity specification - smallest saw diameter 16.0 mm - minimum section length 6.0 mm - Automatic mode / single cut selectable - Infinitely variable belt speed adjustment - Stepless adjustment of the feed speed - User manuel * Machinevideo : https://www.youtube.com/watch?v=ienfdjAV4Y0 https://www.youtube.com/watch?v=L2hNdNV58ac

Lagernummer:
1008-9173315
cutting diameter:
280 mm
capacity 90 degrees: flat:
280 x 280 mm
dimensions of saw-band:
4930 mm
cutting speed:
19 - 90 m/min
INDUMASCH 200 H, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397092

Lagernummer:
1008-9397092
plate thickness:
4,0 mm ST
plate thickness:
3,0 mm VA
table-size:
1200 x 780 mm
blade length:
200 x 200 mm
FALKEN RS 1550 x 90, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RS 1550 x 90

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - Profile grooves: 4/6/9 mm

Lagernummer:
1008-8405562
sheet width:
1550 mm
plate thickness:
2,0 mm
roll length:
1550 mm
roll diam. toproll:
90,0 mm
EUROMAC FX BEND 850, Metal Processing, Sheet metal working / shaeres / bending, Press Brake - Mechanical

EUROMAC

FX BEND 850

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Press Brake - Mechanical

** New price ~ 85.000 euros ** well-kept / very good condition (!!) ** with electromechanical direct drive (servo motor + ball screws) ** Machine is operated without hydraulic oil Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm * Machine video : https://www.youtube.com/watch?v=foxzKIA7vX8 https://www.youtube.com/watch?v=lCH06VShlHA

Lagernummer:
1008-9308325
pressure:
20,0 t
chamfer lenght:
850 mm
distance between columns:
850 mm
back stop - adjustable:
375 + 400 mm
FALKEN RM 1270 x 90 motor., Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

RM 1270 x 90 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device

Lagernummer:
1008-8405518
sheet width:
1270 mm
plate thickness:
2,5 mm
roll length:
1270 mm
roll diam. toproll:
90,0 mm
OMCN Mod. 153, Metal Processing, Presses, Tryout Press - hydraulic

OMCN

Mod. 153

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Tryout Press - hydraulic

Furnishing: - hydraulic workshop press - 2-way valve with autom. Piston retraction - Two-stage descent speed - Height adjustable table - Operating instructions in German

Lagernummer:
1008-8370049
pressure:
10,0 t
stroke:
190 mm
table surface area:
520 x 120 mm
dayligth:
350 mm
IBARMIA KM-25 VE, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

IBARMIA

KM-25 VE

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** from a training workshop (!!) ** New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop

Lagernummer:
1008-9093626
bore capacity in steel (diameter):
25,0 / 30,0 mm
throat:
150 mm
bore stroke:
120 mm
threading:
M18 / M22
A+B Mod. ACO-1, 400 Volt, Metal Processing, Grinding machines, Belt Grinding Machine

A+B

Mod. ACO-1, 400 Volt

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

** MADE IN GERMANY ** Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Lagernummer:
1008-823111
width of the strips:
100 mm
band length:
920 mm
band speed:
7 m/sec
loading area:
300 x 150 mm
MEXPOL C 20, Metal Processing, Milling machines, Universal Milling Machine

MEXPOL

C 20

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a disabled workshop (!!) Furnishing : - robust / conventional universal milling machine - Swivel control, right front - rotatable universal milling head - manual milling spindle feed, with locking - Stable T-slot clamping/angle table - Central lubrication unit - Machine swing feet - Coolant device, with lower pan

Lagernummer:
1008-9131172
x-travel:
420 mm
y-travel:
200 mm
z-travel:
330 mm
taper in main spindle:
ISO 40
EISELE - Halbautomat LMS-II-PV, Metal Processing, Saws, Aluminium Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Furnishing: - semi-automatic ALU circular saw - pneumatic material clamping - continuous adjustment of the saw head lowering speed - Machine table with miter adjustment - Machine base * Machine link: https://www.youtube.com/watch?v=k-VA1e8rSJI

Lagernummer:
1008-9164077
saw blade diameter:
350 mm
cutting diameter:
115 mm
capacity 90 degrees: flat:
200 x 80 mm
turning speeds:
1700/3400 U/min
GASPARINI PBS 45/2000 FP, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

GASPARINI

PBS 45/2000 FP

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** good / well-maintained condition (!!) Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308356

Lagernummer:
1008-9308356
pressure:
45,0 t
chamfer lenght:
2050 mm
distance between columns:
1600 mm
column arm:
300 mm
BERNARDO KBR 100 x 2000 DUO, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

KBR 100 x 2000 DUO

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Lagernummer:
1008-8230081
width of the strips:
100 mm
band length:
2000 mm
band speed:
15/30 m/sec
tube diameter:
20 - 76 mm
ATLANTIC HPT 40.180, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ATLANTIC

HPT 40.180

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - NC controlled hydraulic press brake * with torsion shaft - ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric back gauge * with 2 stop fingers, manually adjustable * on ball screws - manual table crowning, with analogue display - divided deer foot upper tool 85° - divided MultiV - universal matrix block - rear protection - free-moving 2-hand / double-foot operation

Lagernummer:
1008-9308248
pressure:
180 t
chamfer lenght:
4100 mm
distance between columns:
3150 mm
stroke - stepless adjustable:
200 mm
WEILER COMMODOR, Metal Processing, Lathes, lathe-conventional-electronic

WEILER

COMMODOR

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

** Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis "HEIDENHAIN" digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 5x inserts - Movable tailstock, with live center - Chip protection rear panel - 4x machine swing feet - 2x EMERGENCY OFF button on the front - Lead/feed screw protection - adjustable bed stop - Various application / turning tools * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207335

Lagernummer:
1008-9207335
turning length:
1000 mm
turning diameter over bed:
380 mm
turning diameter over slide rest:
190 mm
number of spindle speeds:
25 - 2000 U/min.
EISELE - Halbautomat PSU-H 471, Metal Processing, Saws, Cold Circular Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Furnishing: - electro-hydraulic semi-automatic cold circular saw - EISELE front control panel - robust and stable machine base - continuously adjustable feed speed of the saw blade - front guard / foldable - Drive via worm gear including “EISELE rotation compensation” - comfortable miter adjustment in both directions via large turntable - suitable for the use of Ø 400/425/450 saw blades - hydraulic material tension - Pole changer motor for the gear stages - Coolant device - User manual (PDF) - Duty cycle: - Turn on hydraulic pump motor - Tighten - Saw advance - Saw return - Relax * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164088

Lagernummer:
1008-9164088
saw blade diameter:
450 mm
cutting diameter:
150 mm
capacity 90 degrees: flat:
400 x 30 mm
capacity 90 degrees: flat:
345 x 70 mm
BERNARDO KFM 600 S, Other Accessories for Machine Tools, Other accessories for machine tools, Milling Device

BERNARDO

KFM 600 S

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Milling Device

Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool

Lagernummer:
1008-8130703
power capacity:
0,75 kW
degree:
45° Grad
turning speeds:
10.000 U/min
milling height:
4,0 mm
CAIR COMPANY CairMobil 730 Plus, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

CAIR COMPANY

CairMobil 730 Plus

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - a pre-assembled connection cable with 5-pin. connector and phase reversal

Lagernummer:
1008-8489064
feed pressure:
10,0 bar
intake capacity:
727 L/min
Effective free air delivery:
582 L/min
Receiver capacity:
90,0 Ltr.
DURMA SB 3006 NT HH, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

DURMA

SB 3006 NT HH

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop (!!) ** very good / well-maintained condition (as new) ** with only 912 operating hours ** current new price ~ 45.000 euros ** Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear * with DURMA ENC 100M control * manual cutting gap adjustment * Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA "ENC 100M" NC control unit * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1,000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x front side stop .. 1.500 mm - 2x front support arms .. 1.500 mm - Ball rollers in the front support table - hinged finger protection, with safety switch - Light barrier behind the machine (safety device) - 1x freely movable foot switch - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325330

Lagernummer:
1008-9325330
sheet width:
3100 mm
plate thickness:
6.0 mm
thickness at "Niro-steel":
4.0 mm
distance between columns:
3120 mm
AK BEND APK 35, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 35

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - Robust electro-motor ring/profile bending machine - Machine base, with rear shelf - Horizontal and vertical work possible - 1x free moving footswitch - segmented standard rollers (divided) - 2x motor driven rollers - manual delivery of the top roller - analogue position display of the top rollers (scale) - manually adjustable lateral/straightening rollers - CE mark / declaration of conformity - User manual in German

Lagernummer:
1008-840422
I - beam section - flat steel:
120 x 15 (d 750) mm
I-beam section - upend:
60 x 10 (d 800) mm
L-beam:
50 x 5 (d 1200) mm
round material:
35,0 (d 800) mm
CAIR COMPANY CairMobil 180 Oelfrei, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

CAIR COMPANY

CairMobil 180 Oelfrei

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

Description : - portable craftsman piston compressor - permissible duty cycle up to 30% - *1-stage, direct-coupled, single-cylinder airend - Compressor mechanics working completely OIL-FREE - Very compact design for easy handling - Finely ribbed cylinder and cylinder head - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - an automatically regulating pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges - Safety valve - pre-assembled connection cable with plug

Lagernummer:
1008-8489062
feed pressure:
8,0 bar
intake capacity:
180 L/min
Effective free air delivery:
112 L/min
Receiver capacity:
6,0 Ltr.
AK BEND ASM 140-12/5,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

AK BEND

ASM 140-12/5,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Lagernummer:
1008-8400182
sheet width:
1250 mm
plate thickness:
5,5 mm
pre-bending:
5,0 mm
roll diam. toproll:
140 mm
CAIR COMPANY CairMobil 540, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

CAIR COMPANY

CairMobil 540

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - pre-assembled connection cable with 5-pin. plug and phase changer

Lagernummer:
1008-8489065
feed pressure:
10,0 bar
intake capacity:
539 L/min
Effective free air delivery:
377 L/min
Receiver capacity:
90,0 Ltr.
AK BEND AHS 40/10, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 40/10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8405568
sheet width:
4100 mm
plate thickness:
13,0 mm ST
pre-bending:
10,0 mm ST
diameter of upper rolls:
360 mm
CAIR COMPANY CairMobil 350, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

CAIR COMPANY

CairMobil 350

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - Solid rubber wheels - a branded pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges

Lagernummer:
1008-8489063
feed pressure:
10,0 bar
intake capacity:
345 L/min
Effective free air delivery:
228 L/min
Receiver capacity:
50,0 Ltr.
HERMLE UWF 801, Metal Processing, Milling machines, Universal Milling Machine

HERMLE

UWF 801

Kategorie 1:
Metal Processing
Kategorie 2:
Milling machines
Kategorie 3:
Universal Milling Machine

** from a training workshop ** maintained condition (!!) Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9131203

Lagernummer:
1008-9131203
x-travel:
510 mm
y-travel:
450 mm
z-travel:
410 mm
taper in main spindle:
MAS BT 45° (SK40)
BEYELER RH 100-3100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BEYELER

RH 100-3100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308337

Lagernummer:
1008-9308337
pressure:
100 t
chamfer lenght:
3100 mm
distance between columns:
2600 mm
column arm:
255 mm
AK BEND APK 30, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 30

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - Robust electro-motor ring/profile bending machine - Horizontal and vertical work possible * Machine head foldable by 90° - 1x free moving footswitch - segmented standard rollers (divided) - 2x motor driven rollers - manual delivery of the top roller - analogue position display of the top rollers (scale) - manually adjustable lateral/straightening rollers - CE mark / declaration of conformity - User manual in German

Lagernummer:
1008-840456
L-beam:
40 x 5 (d 500) mm
I - beam section - flat steel:
80 x 15 (d 700) mm
I-beam section - upend:
50 x 10 (d 800) mm
round material:
30,0 (d 700) mm
SCHAEFER SRMASY V-28, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

SCHAEFER

SRMASY V-28

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - robust 3-roller round bending machine * with asymmetrical roller arrangement - freely movable operation - analogue position display for rollers (scale) - firmly mounted top roller - manual delivery of the bottom roller, using handwheels with scales - electrically adjustable side roller * An inclination is possible by pressing out a coupling * Inclined position for bending conical tubes * Adjustment is via a geared motor - driven upper and lower rollers * Side roller runs as a drag roller - original operating instructions + machine card ** Performance table SRMASY V-28: - Sheet width 2,000 mm .. 8.0 mm ST - Sheet width 1,500 mm .. 8.2 mm ST - Sheet width 1,000 mm .. 9.2 mm ST - Sheet width 750 mm .. 10.2 mm ST - Sheet width 500 mm .. 12.0 mm ST - Sheet width 250 mm .. 16.0 mm ST

Lagernummer:
1008-9401241
sheet width:
2000 mm
plate thickness:
8,0 mm max.
plate thickness:
8,0 mm anbiegen
roll diam. toproll:
240 mm
BERNARDO HA 250 x 6,5, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

HA 250 x 6,5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Lagernummer:
1008-8392025
:
6,5 mm ST 40
:
3,5 mm VA
:
90° Grad
blade length:
250 x 250 mm
AK BEND AHS 30/16, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 30/16

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8405571
sheet width:
3100 mm
plate thickness:
16,0 mm ST
pre-bending:
20,0 mm ST
diameter of upper rolls:
360 mm
BERNARDO HA 200 x 6 VSW, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

HA 200 x 6 VSW

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Lagernummer:
1008-8392026
:
6,0 mm ST 40
:
3,0 mm VA
:
30 - 140 Grad
blade length:
200 x 200 mm
AK BEND AHS 30/06, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 30/06

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8405569
sheet width:
3100 mm
plate thickness:
8,0 mm ST
pre-bending:
6,0 mm ST
diameter of upper rolls:
230 mm
ERMAK POWER BEND FALCON 26.100, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

POWER BEND FALCON 26.100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Current new price ~ 60.000 euros ** Special price on request ** from a maintenance workshop - good condition ** with only approx. 1.990 operating hours (!!) -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) * 2D graphical programming * 10.4" TFT color screen with high resolution * Bending sequence calculation * USB interface - Swiveling control panel, mounted on the left - CNC motorized backgauge with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes Y1 - Y2 - X - R - C (crowning) - CNC electric table crowning - divided deer foot upper tool Rolleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Divided universal die block Rolleri M 460 R, including die shoe - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical system - Safety device = light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - Operation manual machine + CNC controler * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308335 * Machinevideo : https://www.youtube.com/watch?v=t9gPmzchB6Y

Lagernummer:
1008-9308335
pressure:
100 t
chamfer lenght:
2600 mm
distance between columns:
2200 mm
column arm:
410 mm
AK BEND APK 61, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

AK BEND

APK 61

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x manually adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German

Lagernummer:
1008-8404430
I - beam section - flat steel:
80 x 20 (d 1200) mm
I-beam section - upend:
80 x 25 (d 2100) mm
L-beam:
50 x 50 x 6 (d 1000) mm
bar material - diameter:
40,0 (d 800) mm
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Lagernummer:
1008-8531664
table length:
3000 mm
table width:
1500 mm
table height (lateral area):
100 mm
weight:
753 kg
ATLANTIC ATS 3000, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ATLANTIC

ATS 3000

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x extra long, robust side stop .. 3,000 mm - 1x extra long, robust support arm - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325333

Lagernummer:
1008-9325333
sheet width:
3050 mm
plate thickness:
6,0 mm
cutting angle:
0,5 - 3,0 °
down holder:
18 Stück
AK BEND AHS 20/06, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 20/06

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8405572
sheet width:
2100 mm
plate thickness:
8,0 mm ST
pre-bending:
6,0 mm ST
diameter of upper rolls:
190 mm
BERNARDO DP 5, Metal Processing, Presses, Piercing Press
Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Piercing Press

Description : - for pressing in and out of bearings, bushings, ... - the basic body of the model DP 5 made of high-quality gray cast iron - Includes mounting holes, ideal for mounting on a workbench - suitable for bushing, straightening, bending, broaching, ... - variably adjustable lever bar, depending on the required effort - ideal for repair shops and the general workshop area

Lagernummer:
1008-8392003
pressure:
5,0 t
throat:
215 mm
workpiece height max.:
445 mm
Mandrel diameter:
50 x 50 x 645 mm
AK BEND AHS 40/06, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 40/06

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8405570
sheet width:
4100 mm
plate thickness:
8,0 mm ST
pre-bending:
6,0 mm ST
diameter of upper rolls:
300 mm
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531652
table length:
1500 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
255 kg
BERNARDO TITAN 560-1500 PRO VARIO, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 560-1500 PRO VARIO

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 120mm max - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - First fill with Shell Tellus 46 - Clamping disc 450 mm - 2 center points - Frequency converter - Digital speed display - slip clutch - Rapid traverse longitudinal and face - Cooling device - Quick change steel holder with 4 inserts - Change gears - Reducing sleeve - chip rear wall - Operating tool

Lagernummer:
1008-8203158
turning length:
1500 mm
turning diameter:
560 mm
turning diameter over slide:
350 mm
turning speeds:
25-220/220-1500 U/min
ATLANTIC ATS 3012, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

ATLANTIC

ATS 3012

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge * with analogue display * Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325234

Lagernummer:
1008-9325234
sheet width:
3050 mm
plate thickness:
12,0 mm ST
plate thickness:
8,0 mm VA
no. of strokes:
7 - 14 Hub/min
MARK MSM 15 DXM 500 L, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

MARK

MSM 15 DXM 500 L

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 7.476 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489130
feed pressure:
10,0 bar
Effective free air delivery:
1.680 L/min
motor:
400 V
0:
500 Liter
KNUTH KHT 3206 C, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

KNUTH

KHT 3206 C

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** from a maintenance workshop - good condition (!!) ** was only used sporadically according to the previous seller ** New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH "EASY-VIEW" touch CNC positioning control * Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle * for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of the cutting length for short strokes - Machine side stand with projection - 1x long side stop, including tilting cam and mm scale - 3x front support arms - Support table including ball rollers - rear protective device (safety doors) - front finger/encroachment protection - 1x freely movable foot switch including emergency stop button - "CE" marking - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325321

Lagernummer:
1008-9325321
sheet width:
3200 mm
plate thickness:
0.5 - 6.0 mm
cutting angle:
1° 30 °
no. of strokes:
14 Hub/min
BERNARDO SRB 40 NC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Rapid Radial Drilling Machine

BERNARDO

SRB 40 NC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Rapid Radial Drilling Machine

characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Lagernummer:
1008-8110004
threading:
30 M
bore capacity in steel (diameter):
40,0 mm
workpiece height max.:
380 - 785 mm
arm length:
985 mm
SIEGMUND 16, PROF 750 2400x1200 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROF 750 2400x1200 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Lagernummer:
1008-8531695
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
100 mm
weight:
537 kg
BERNARDO B 1050 BOX, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

B 1050 BOX

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

characteristics - Universally applicable bending machines for plumbing and repair shops - Simple pivoting movement of the bending beam using a bow handle - Easy adjustment of the upper beam for efficient work - High upper beam for producing high-edged profiles - The piano inserts in the upper, lower and bending beam result in a large number of bending options - Cassettes and special profiles with opposite bends are with these Models easily feasible Scope of delivery : - Segmented upper, lower and bending beam - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm

Lagernummer:
1008-8350400
sheet width:
1050 mm
plate thickness:
1,0 mm
daylight opening:
95 mm
angle adjustable from - to:
0 - 150 Grad
SIEGMUND 16, PROF 750 2000x1000 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROF 750 2000x1000 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Lagernummer:
1008-8531696
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
354 kg
SIEGMUND 28, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment

Lagernummer:
1008-8531656
table length:
3000 mm
table width:
1500 mm
table height (lateral area):
200 mm
weight:
1374 kg
JOERG 4865, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

JOERG

4865

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

** very well-maintained condition (!!) Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control * operable from the front * Entry of target / actual for electr. backgauge - NC motorized backgauge * with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325295

Lagernummer:
1008-9325295
sheet width:
2550 mm
plate thickness:
2,50 mm
thickness at "Niro-steel":
1,25 mm
cutting angle:
1°30
BAYKAL MGH 3100/10, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Hydraulic

BAYKAL

MGH 3100/10

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Hydraulic

Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)

Lagernummer:
1008-9325287
sheet width:
3060 mm
plate thickness:
10,0 mm
thickness at "Niro-steel":
6,0 mm
back stop - adjustable:
5,0 - 1000 mm
BERNARDO SB 4, Other Machines, Other attachments, Sandblasting Machine
Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Working space: 1110 x 820 x 810 mm (LxWxH) - very stable construction - including sandblasting gun (usable grain size 0.149 - 0.250 mm) - including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Transport dimensions / packed: 1350 x 1000 x 1100 mm - Instruction manual in German

Lagernummer:
1008-8809010
through-put width:
820 mm
working heigth:
810 mm
Air consumption:
680 l/min.
air pressure:
8,6 bar
SIEGMUND RP 1250, Metal Processing, Welding machines, Rotary Welding Table

SIEGMUND

RP 1250

Kategorie 1:
Metal Processing
Kategorie 2:
Welding machines
Kategorie 3:
Rotary Welding Table

The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control

Lagernummer:
1008-8531685
weight max. in kg:
1250 kg
turning speeds:
2,0 U/min
height:
max. 1.120 mm
Torque:
Tisch 490 Nm
IMET SIRIO 350 AF-E CEB, Metal Processing, Saws, Cold Circular Saw

IMET

SIRIO 350 AF-E CEB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

** Current new price approx. 25.000 euros ** Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164086

Lagernummer:
1008-9164086
saw blade diameter:
350 mm
cutting diameter:
110 mm
capacity 90 degrees: flat:
180 x 85 mm
capacity 45 degrees: round:
105 mm
BERNARDO SB 3, Other Machines, Other attachments, Sandblasting Machine
Kategorie 1:
Other Machines
Kategorie 2:
Other attachments
Kategorie 3:
Sandblasting Machine

Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Instruction manual in German

Lagernummer:
1008-8809009
through-put width:
580 mm
working heigth:
615 mm
discs:
570 x 260 mm
Air consumption:
400 l/min.
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Lagernummer:
1008-8531662
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
100 mm
weight:
499 kg
BOSCHERT K30-120 MINI S, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BOSCHERT

K30-120 MINI S

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - 2x staking stops * with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090

Lagernummer:
1008-9397090
:
4,0 mm
:
3,0 mm
:
30 - 120 Grad
blade length:
150 x 150 mm
BERNARDO TBS 1020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TBS 1020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Scope of delivery : - Segmented upper cheek - Segmented lower cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Lagernummer:
1008-8355020
sheet width:
1020 mm
plate thickness:
2,0 mm
daylight opening:
48 mm
bending angle max.:
0 - 135 °
SIEGMUND 16, Professional 750 2000x1000, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, Professional 750 2000x1000

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment

Lagernummer:
1008-8531692
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
354 kg
RSA RASAMAX Mono, Other Metal Processing, Other machines, Deburring Machine

RSA

RASAMAX Mono

Kategorie 1:
Other Metal Processing
Kategorie 2:
Other machines
Kategorie 3:
Deburring Machine

Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238987

Lagernummer:
1008-9238987
diameter of brush:
250 mm
width of brush:
80 mm
turning speed range:
1500 / 3000 U/min
voltage:
380 Volt
FASTI 2095-25-2.5, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FASTI

2095-25-2.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** maintained condition (!!) Furnishing: - robust electro-motive folding machine - Bending angle adjustment via electric potentiometer * infinitely adjustable * with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment up to 115 mm - 1x set of bending tools (installed / used condition) - freely movable double foot switch - manual material back gauge, adjustable at the back * Adjustment range up to max. ~ 690 mm - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355200

Lagernummer:
1008-9355200
sheet width:
2540 mm
plate thickness:
2.50 mm
distance between columns:
2600 mm
daylight opening:
OW 300 mm
BERNARDO Standard 165 V-D, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

Standard 165 V-D

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve - change gears - 2 center points - underframe - operating tool

Lagernummer:
1008-8203140
turning length:
1000 mm
turning diameter:
350 mm
turning dia. in gap:
450 mm
spindle bore:
40,0 mm
ERMAK SPEED BEND PRO 4.220, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

ERMAK

SPEED BEND PRO 4.220

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

-------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Lagernummer:
1008-830220
pressure:
220 t
chamfer lenght:
4100 mm
distance between columns:
3600 mm
column arm:
410 mm
FIM / AMADA VERSA 204, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

FIM / AMADA

VERSA 204

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397088

Lagernummer:
1008-9397088
plate thickness:
4,0 mm ST
plate thickness:
3,0 mm VA
table-size:
1200 x 780 mm
blade length:
200 x 200 mm
MAXION BS 25 ST, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

MAXION

BS 25 ST

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** Machine from a vocational school ** very good condition (!!) TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including cabinet door * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093639

Lagernummer:
1008-9103738
bore capacity in steel (diameter):
25,0 / 30,0 mm
throat:
260 mm
bore stroke:
120 mm
spindle taper:
3 MK
BERNARDO RD 1250x50, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

BERNARDO

RD 1250x50

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Lagernummer:
1008-8110014
bore capacity in steel (diameter):
50,0 mm
arm length:
320 - 1.220 mm
workpiece height max.:
330 - 1.170 mm
turning speeds:
25 - 2000 U/min
SIEGMUND 28, PROF 750 3000x1500 - SET 3, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROF 750 3000x1500 - SET 3

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Lagernummer:
1008-8531693
table length:
3000 mm
table width:
1500 mm
table height:
850 mm
side-clamping surface::
200 (Höhe) mm
MAXION BT 25 ST, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

MAXION

BT 25 ST

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

** Machine from a maintenance workshop TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including coolant system - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093640

Lagernummer:
1008-9093640
bore capacity in steel (diameter):
25,0 / 30,0 mm
throat:
260 mm
bore stroke:
120 mm
spindle taper:
3 MK
BERNARDO TB 2060, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 2060

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

- Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Lagernummer:
1008-8355079
sheet width:
2065 mm
plate thickness:
1,20 mm
daylight opening:
30,0 mm
bending angle max.:
0 - 135 °
SIEGMUND 16, Professional 750 2400x1200, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, Professional 750 2400x1200

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Lagernummer:
1008-8531691
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
100 mm
weight:
466 kg
BERNARDO BM 2020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

BM 2020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever

Lagernummer:
1008-8355011
sheet width:
2020 mm
plate thickness:
2,0 mm
daylight opening:
124 mm
bending angle max.:
0 - 135 °
SIEGMUND 28, Professional 750 3000x1500, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, Professional 750 3000x1500

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Lagernummer:
1008-8530024
table length:
3000 mm
table width:
1500 mm
table height:
850 mm
side-clamping surface::
200 (Höhe) mm
BERNARDO TB 2020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 2020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Lagernummer:
1008-8355014
sheet width:
2020 mm
plate thickness:
2,0 mm
daylight opening:
122 mit Segmente mm
bending angle max.:
0 - 135 °
SIEGMUND 28, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531657
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
200 mm
weight:
699 kg
BERNARDO TITAN 560-1500 PRO, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 560-1500 PRO

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Chip back wall - operating tool

Lagernummer:
1008-8203010
turning length:
1500 mm
turning diameter:
560 mm
turning diameter over slide:
350 mm
turning speeds:
25 - 1600 U/min
SIEGMUND 16, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Lagernummer:
1008-8531663
table length:
2000 mm
table width:
1000 mm
table height (lateral area):
100 mm
weight:
351 kg
BERNARDO TB 1270 FLEX, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 1270 FLEX

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 250 | 270mm

Lagernummer:
1008-8355082
sheet width:
1270 mm
plate thickness:
2,0 mm
daylight opening:
48 mm
daylight opening:
150 mm ohne Segmente
SIEGMUND 28, PROFESSIONAL EXTREME 8.7, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

28, PROFESSIONAL EXTREME 8.7

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

** SIEGMUND authorized dealer - all items available! ** ** Item No.: 4-280030.XD7D.1 ** Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Lagernummer:
1008-8531711
table length:
2400 mm
table width:
1200 mm
table height (lateral area):
200 mm
weight:
949 kg
BERNARDO AK 130 P, Metal Processing, Sheet metal working / shaeres / bending, Notching Machine

BERNARDO

AK 130 P

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Notching Machine

Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe

Lagernummer:
1008-8390115
:
3,0 mm ST 40
:
2,0 mm VA
:
90° Grad
blade length:
130 x 130 mm
SIEGMUND 16, PROFESSIONAL 750 3000x1500, Other Accessories for Machine Tools, Other accessories for machine tools, Clamping Table

SIEGMUND

16, PROFESSIONAL 750 3000x1500

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Clamping Table

The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment

Lagernummer:
1008-8532084
table length:
3000 mm
table width:
1500 mm
table height (lateral area):
100 mm
weight:
726 kg
AK BEND AKM 250 motor., Metal Processing, Sheet metal working / shaeres / bending, Crimping Machine

AK BEND

AKM 250 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Crimping Machine

Furnishing : - 3x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of various types of beads - high accuracy due to precision-bearing shafts - Clearly arranged switching elements - Underframe equipped with storage compartment - powerful drive motor, even under continuous load - Mobile foot switch for right and left rotation

Lagernummer:
1008-8470411
plate thickness:
2,5 mm
throat:
260 mm
distance between roll centers:
92 mm
weight:
295 kg
FALKEN R 1270 x 75, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

R 1270 x 75

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm

Lagernummer:
1008-8405561
sheet width:
1270 mm
plate thickness:
1,50 mm
roll length:
1270 mm
roll diam. toproll:
75,0 mm
BERNARDO GHD 25 TN, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

BERNARDO

GHD 25 TN

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Lagernummer:
1008-8092703
bore capacity in steel (diameter):
25,0 mm
throat:
255 mm
bore stroke:
120 mm
morse taper:
3 MK
AK BEND AHS 25/08, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 25/08

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8400801
sheet width:
2600 mm
plate thickness:
10,0 mm
pre-bending:
8,0 mm
diameter of upper rolls:
230 mm
FMS PF - 30 P, Metal Processing, Presses, Eccentric Press - Single Column

FMS

PF - 30 P

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Eccentric Press - Single Column

Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Lagernummer:
1008-8371041
pressure:
30 t
throat:
200 mm
stroke:
0 - 60 mm
table::
400 x 600 mm
BERNARDO EBS 100 C, Metal Processing, Saws, Band Saw

BERNARDO

EBS 100 C

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector

Lagernummer:
1008-8174109
capacity 90 degrees: round:
100 mm
capacity 45 degrees: round:
65,0 mm
capacity 90 degrees: flat:
100 x 150 mm
capacity 45 degrees: flat:
60 x 100 mm
BERNARDO VMS 520, Metal Processing, Saws, Band Saw - Vertical

BERNARDO

VMS 520

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Lagernummer:
1008-8170247
roll diameter:
520 mm
throat:
520 mm
workpiece height:
310 mm
cutting speed:
25 - 500 m/min
FMS PF - 10 P, Metal Processing, Presses, Eccentric Press - Single Column

FMS

PF - 10 P

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Eccentric Press - Single Column

Lagernummer:
1008-8371040
pressure:
10 t
throat:
160 mm
stroke:
0 - 40 mm
table::
270 x 370 mm
BERNARDO TB 1020, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

BERNARDO

TB 1020

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Lagernummer:
1008-8355012
sheet width:
1020 mm
plate thickness:
2,5 mm
daylight opening:
48 mm
bending angle max.:
0 - 135 °
BOGE S5 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S5 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price: 8.848 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489109
feed pressure:
10 bar
Effective free air delivery:
700 L/min
motor:
400 V
0:
250 Liter
FALKEN IR 1050 x 75 motor., Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

IR 1050 x 75 motor.

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets i.d. rolls - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - electr. safety device - Profile grooves : 4/6/10 mm

Lagernummer:
1008-8405563
sheet width:
1050 mm
plate thickness:
2,0 mm
roll length:
1050 mm
roll diam. toproll:
75,0 mm
FMS PF - 20 P, Metal Processing, Presses, Eccentric Press - Single Column

FMS

PF - 20 P

Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Eccentric Press - Single Column

Lagernummer:
1008-8371042
pressure:
20 t
throat:
200 mm
stroke:
0 - 50 mm
table::
360 x 550 mm
FALKEN R 1050 x 68, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FALKEN

R 1050 x 68

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm

Lagernummer:
1008-8405560
sheet width:
1050 mm
plate thickness:
1,50 mm
roll length:
1050 mm
roll diam. toproll:
68,0 mm
FLOTT BSM 150 A, Metal Processing, Grinding machines, Belt Grinding Machine

FLOTT

BSM 150 A

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Lagernummer:
1008-823839
width of the strips:
150 mm
band length:
2000 mm
band speed:
30,0 mm/sek
grinding width:
500 Plantisch mm
BERNARDO DS 250 S, Metal Processing, Grinding machines, Double spindle mounted in journals

BERNARDO

DS 250 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Double spindle mounted in journals

scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Lagernummer:
1008-8232020
grinding width:
32 mm
max. dia. of grinding wheel:
250 mm
grinding wheel size:
250 x 32 x 32 mm
weight:
33 kg
BOGE S15 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S15 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 13.576 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489108
feed pressure:
10 bar
Effective free air delivery:
1.950 L/min
motor:
400 V
0:
250 Liter
FLOTT 16 STG / R2, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

FLOTT

16 STG / R2

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Furnishing: - manual spindle feed - including thread cutting function - continuous speed adjustment (variomatic) - Digital drilling depth display at the front - Work table height adjustable via hand crank & T-slots - V-belt drive - pole-changing motor - EMERGENCY stop button at the front - Front main/toggle switch - Machine swing feet (self-made) - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103751 * Machine video: https://www.youtube.com/watch?v=gTVwBLikpZA

Lagernummer:
1008-9103751
bore capacity in steel (diameter):
16.0 / 20.0 mm
throat:
240 mm
bore stroke:
100 mm
spindle taper:
2 MK
BERNARDO WB 100, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal

BERNARDO

WB 100

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop

Lagernummer:
1008-8361096
square edge steel:
16 x 16 mm
flat steel:
100 x 5 mm
L-beam:
60 x 8 mm
bending radius min.:
190 mm
HM HS-2AS ERGO Motor, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

HM

HS-2AS ERGO Motor

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

Description: Swivel bending machine with patented hydraulic auxiliary cylinder and Remote control. The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. The motorized function is over a remote control operated with an emergency stop. Version S - with segmented upper beam for boxes and special profiles - Max. Bending angle 135 ° - Max. Opening upper beam 45 mm - The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported - The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. - the motorized function is operated via a remote control with emergency stop

Lagernummer:
1008-8355023
sheet width:
1020 mm
plate thickness:
2,75 mm 400N/mm²
daylight opening:
45 mm
bending angle max.:
0 - 135 °
FASTI 507-25-3.25, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

FASTI

507-25-3.25

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325320

Lagernummer:
1008-9325320
sheet width:
2540 mm
plate thickness:
3.25 mm
throat:
100 mm
no. of strokes:
60.0 Hub/min
BOGE S7 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S7 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 9.450 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489106
feed pressure:
10 bar
Effective free air delivery:
1.000 L/min
motor:
400 V
0:
250 Liter
FASTI 104-15-1.5, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 3 Rolls

FASTI

104-15-1.5

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 3 Rolls

** maintained condition ** from a maintenance workshop Furnishing: - asymmetrical roller arrangement - crowned rollers approx. 700N/mm² - Rounding and finishing rounds in the machine - Motorized adjustment of the rear/side roller * with min. & max. position value specification * Adjustment by electric potentiometers * Front right operation - Manual adjustment of the bottom rollers using a large hand wheel - Conical bending by tilting the lower and rear rollers - Top roller can be swung out to the front - Bending performance = bending performance - Gear motor v - 6 m/min. - 1x free-moving dual footswitch (forward and reverse) - electrical safety device - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401249

Lagernummer:
1008-9401249
sheet width:
1520 mm
plate thickness:
1,5 mm
pre-bending:
1,5 mm
roll diam. toproll:
80,0 mm
HERA UM III / 1000 x 8 mm, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

HERA

UM III / 1000 x 8 mm

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** maintained condition ** with a lot of bending tools (!!) ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x guide spindles - 1x free moving foot control - 1x mobile tool cabinet for bending tools Manufacturer description: - electronic lifting height and bending angle adjustment - Deactivation of the upper beam lifting height and the clamping pressure via timing relay and voltage meter - Pushbuttons for controlling the upper and bending beam with manual switching, included Upper beam can also be operated via foot switch - Adjustability of all cheeks - Silent twin motors oil bath worm gear - Two-way drive of upper and bending beam via 2 continuous shafts - Drive of the upper beam via threaded spindles - Drive of the bending beam via internal toothed segments * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355188

Lagernummer:
1008-9355188
sheet width:
1050 mm
plate thickness:
8,0 mm
distance between columns:
1250 mm
angle adjustable from - to:
0 - 180 Grad
BERNARDO MASTER PRO 360, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

MASTER PRO 360

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

scope of delivery : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 60 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 280 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool

Lagernummer:
1008-8203096
turning length:
1000 mm
turning diameter:
360 mm
swing diameter over bed slide:
220 mm
turning dia. in gap:
502 mm
A + B HU Tap AT-20/II, Metal Processing, Threading machines, Thread-Cutting Machine

A + B

HU Tap AT-20/II

Kategorie 1:
Metal Processing
Kategorie 2:
Threading machines
Kategorie 3:
Thread-Cutting Machine

Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Lagernummer:
1008-8100031
thread dia.:
20 M
turning speeds:
400 U/min
thread:
M 4 - M 20 M
working area:
1900 Rmax.
FASTI 204-12-1.75, Metal Processing, Sheet metal working / shaeres / bending, Folding Machine

FASTI

204-12-1.75

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Folding Machine

** good condition (!!) ** Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355182

Lagernummer:
1008-9355182
sheet width:
1270 mm
plate thickness:
1,75 mm ST
plate thickness:
2,00 mm ALU
plate thickness:
2,50 mm KU
BERNARDO TITAN 660 - 2000, Metal Processing, Lathes, lathe-conventional-electronic

BERNARDO

TITAN 660 - 2000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain - Operating tool

Lagernummer:
1008-8203006
turning length:
2000 mm
centre height:
330 mm
swing diameter over bed slide:
660 mm
swing diameter over slide rest:
460 mm
BEYELER RH 60x2050, Metal Processing, Sheet metal working / shaeres / bending, Hydr. pressbrake

BEYELER

RH 60x2050

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Hydr. pressbrake

** Machine from a workshop for the disabled ** maintained condition (!!) Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * high resolution screen * Clear, concise menus in the operator's language * Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning * very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308363

Lagernummer:
1008-9308363
pressure:
60.0 t
chamfer lenght:
2050 mm
distance between columns:
1550 mm
column arm:
255 mm
FERINA VTZ 1000, Metal Processing, Saws, Band Saw - Vertical

FERINA

VTZ 1000

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw - Vertical

** Machine from a maintenance workshop ** very good condition with special accessories (!!) ** Rarely used Furnishing: - robust electric-motor vertical band saw machine - Frequency-controlled, stepless saw band drive * Infinitely adjustable via handwheel * including digital speed display - manual, stepless table feed - Continuous height adjustment of the belt guide - IDEAL butt welding machine model “BSS 016” * including cutting shears and grinding device - manually swiveling support table - Machine base - 2x EMERGENCY stop buttons - Connection cable including 16A plug - Machine light - original instruction manual * Special accessories included: - MICRO spray device (cooling saw band) - 3x X-RAY saw band rolls - 4x machine swing feet * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173360

Lagernummer:
1008-9173360
roll diameter:
420 mm
throat:
1000 mm
workpiece height:
400 mm
cutting speed:
25 - 1000 m/min
BERNARDO MS 75 x 2000 S, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 75 x 2000 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823843
width of the strips:
75 mm
band length:
2000 mm
band speed:
29,0 m/sek
grinding width:
460 x 75 Plantisch mm
BOGE S11 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S11 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** ~ List price : 11.056 euros / special price on request ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489107
feed pressure:
10 bar
Effective free air delivery:
1.450 L/min
motor:
400 V
0:
250 Liter
FLOTT BSM 75 A, Metal Processing, Grinding machines, Belt Grinding Machine

FLOTT

BSM 75 A

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Lagernummer:
1008-823838
width of the strips:
75 mm
band length:
2000 mm
band speed:
30,0 mm/sek
grinding width:
500 Plantisch mm
A + B RS, Other Accessories for Machine Tools, Other accessories for machine tools, Roll stand
Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Roll stand

Furnishing: - Safe workpiece support - by massive and heavy-duty galvanized steel rollers - Roller support steplessly height adjustable and clampable - Problem-free and efficient material transport for the supply and removal of workpieces techn. Details: - Load capacity, max. 700 kg - Standpipe diameter 74/52 mm

Lagernummer:
1008-8801021
roll diameter:
51 mm
Wheel width:
350 mm
weight:
20 kg
height adjustment:
575 - 975 mm
MEP COBRA 352 MA 2G, Metal Processing, Saws, Aluminium Circular Saw

MEP

COBRA 352 MA 2G

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Aluminium Circular Saw

Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Special accessories: - including base

Lagernummer:
1008-816001
saw blade diameter:
350 x 32 mm
capacity 90 degrees: round:
120 mm
capacity 90 degrees: square:
105 mm
capacity 90 degrees: flat:
180 x 70 mm
BERNARDO MS 150 x 2000 S, Metal Processing, Grinding machines, Belt Grinding Machine

BERNARDO

MS 150 x 2000 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Belt Grinding Machine

Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Lagernummer:
1008-823844
width of the strips:
150 mm
band length:
2000 mm
band speed:
29,0 m/sek
grinding width:
460 x 150 Plantisch mm
BOGE S4 ECO DR - 10 bar, Other Accessories for Machine Tools, Other accessories for machine tools, Compressor

BOGE

S4 ECO DR - 10 bar

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Compressor

** Exhibition machine / not yet in use ** new BOGE SOLID model series ** List price: 7.476 euros ** Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Lagernummer:
1008-9489122
feed pressure:
10,0 bar
Effective free air delivery:
490 L/min
motor:
400 V
0:
250 Liter
ERCOLINA CE40MR2, Metal Processing, Sheet metal working / shaeres / bending, Section Bender

ERCOLINA

CE40MR2

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Section Bender

** from a chamber of crafts / little used (!!) ** Manufacturer new price including accessories approx. 12.500 euros ** Special price on request Furnishing: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x driven rollers (MR2 model series) - divided roller segments - digital position display of the top roller (0.1 mm) - manual top roller adjustment - R/L running of the bending rollers - Bending speed 20% higher than machines of the same class - Shafts made of forged & ground chrome-nickel steel - Machine base - Horizontal and vertical work possible - freely movable control panel - CE mark - Instruction manual in German * Special accessories included: - 3x ERCOLINA STEEL roller set for pipes * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401270

Lagernummer:
1008-9401270
I - beam section - flat steel:
100 x 15 (d 500) mm
I-beam section - upend:
50 x 10 (d 500) mm
L-beam:
50 x 6.0 (d 600) mm
round material:
35.0 (d 500) mm
BERNARDO BM 25 T - 400, Metal Processing, Boring mills / Machining Centers / Drilling machines, Bench Drilling Machine

BERNARDO

BM 25 T - 400

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Bench Drilling Machine

scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Lagernummer:
1008-8092704
bore capacity in steel (diameter):
25,0 mm
throat:
180 mm
bore stroke:
80,0 mm
morse taper:
2 MK
Winkelbieger WB 200, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal
Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop

Lagernummer:
1008-8362007
bending radius min.:
190 mm
square edge steel:
20 x 20 mm
flat steel:
100 x 7 mm
round bar steel:
22,0 mm
ALZMETALL ALZSTAR 30 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

ALZSTAR 30 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Lagernummer:
1008-8100652
bore capacity in steel (diameter):
30,0 mm
throat:
293 mm
bore stroke:
140 mm
morse taper:
3 MK
ROWA T 280 H, Metal Processing, Sheet metal working / shaeres / bending, bending machine horizontal

ROWA

T 280 H

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
bending machine horizontal

Furnishing : - electro-hydraulic horizontal bending machine - including ROWA semi-automatic control unit: * Programming and storage of 90 different positions * Storage option for 8 bending programs * electr. Setting and digital display * Accuracy of +/- 0.02 mm - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - ROWA bending tools - continuous adjustment of the bending speed and pressing force - 1x freely movable foot switch - Machine can be moved with a pallet truck/stacker * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9386023

Lagernummer:
1008-9386023
pressure:
28.0 t
stroke:
0 - 250 mm
flat steel:
150 x 25 mm
working feed:
0.6 m/min
A + B VRS, Other Accessories for Machine Tools, Other accessories for machine tools, Roll stand

A + B

VRS

Kategorie 1:
Other Accessories for Machine Tools
Kategorie 2:
Other accessories for machine tools
Kategorie 3:
Roll stand

Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg

Lagernummer:
1008-8801022
roll diameter:
51 mm
Wheel width:
125 mm
weight:
20 kg
height adjustment:
560-975 mm
MEP TIGER 352 - 4 Geschw., Metal Processing, Saws, Cold Circular Saw

MEP

TIGER 352 - 4 Geschw.

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Cold Circular Saw

Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The large turntable with internal table clamp & Precision stops at 0/45/60 ° ensure quick adjustability on miter cuts - The quick-release vice is also screwed on Vise jaws provided. - With their corrugation, these ensure an optimal hold of the workpiece - Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded views - Crane eyes for transport * The machine is delivered without a saw blade

Lagernummer:
1008-8160040
saw blade diameter:
350 x 32 mm
capacity 45 degrees: round:
110 mm
capacity 60 degrees: round:
90,0 mm
capacity 90 degrees: square:
95,0 mm
BERNARDO GHD 28 SV, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

GHD 28 SV

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Lagernummer:
1008-8101006
bore capacity in steel (diameter):
28,0 mm
throat:
320 mm
bore stroke:
150 mm
morse taper:
3 MK
MEP - Vollautomat SHARK 332-1 NC 5.0 MDE, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 332-1 NC 5.0 MDE

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

Lagernummer:
1008-8174120
cutting diameter:
300 mm
capacity 90 degrees: flat:
330 x 260 mm
capacity 90 degrees: square:
260 x 260 mm
capacity 45 degrees: round:
260 mm
AK BEND AHS 15/13, Metal Processing, Sheet metal working / shaeres / bending, Plate Bending Machine - 4 Rolls

AK BEND

AHS 15/13

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Bending Machine - 4 Rolls

Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Lagernummer:
1008-8405574
sheet width:
1600 mm
plate thickness:
15,0 mm ST
pre-bending:
13,0 mm ST
diameter of upper rolls:
230 mm
MEUSER M 35 R, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

MEUSER

M 35 R

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

Description - Good gliding ability of the boom thanks to the ground . surface of the outer column - Mechanical locking of the swing movement of the boom - and the headstock displacement - Easy to adjust to the fixed workpiece - Simple, central operation at the front of the machine - Optimum cutting speed thanks to a wide speed range - Quiet running thanks to stable construction - Pole-changing drive motor - automatic spindle feed (0.04/0.07/0.11/0.17/0.28/0.40 mm/rev) - 1x MEUSER clamping cube with T-slots .. 615 x 500 x 510 mm - machined base plate - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103753

Lagernummer:
1008-9103753
bore capacity in steel (diameter):
35.0 mm
bore capacity in cast iron:
40.0 mm
arm length:
max. 1230 mm
turning speeds:
50 - 2250 U/min
BERNARDO HLS 1050 x 2,0, Metal Processing, Sheet metal working / shaeres / bending, Plate Shear - Mechanical

BERNARDO

HLS 1050 x 2,0

Kategorie 1:
Metal Processing
Kategorie 2:
Sheet metal working / shaeres / bending
Kategorie 3:
Plate Shear - Mechanical

- Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Lagernummer:
1008-8328115
sheet width:
1050 mm
plate thickness:
2,0 mm
distance between columns:
1050 mm
down holder:
1 Stück
BERNARDO SB 40 Profi, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

BERNARDO

SB 40 Profi

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sleeve MK 4/3, MK 4/2, MK 3/1 - LED machine light - Automatic tool ejector - Height-adjustable protective cover

Lagernummer:
1008-8100277
bore capacity in steel (diameter):
40,0 mm
throat:
320 mm
bore stroke:
160 mm
morse taper:
4 MK
BERNARDO DP 1, Metal Processing, Presses, Piercing Press
Kategorie 1:
Metal Processing
Kategorie 2:
Presses
Kategorie 3:
Piercing Press

Lagernummer:
1008-8392002
pressure:
1,0 t
throat:
95 mm
table length:
120 mm
table width:
120 mm
ALZMETALL AB 34 iTRONIC, Metal Processing, Boring mills / Machining Centers / Drilling machines, Pillar Drilling Machine

ALZMETALL

AB 34 iTRONIC

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Pillar Drilling Machine

** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Lagernummer:
1008-8100656
bore capacity in steel (diameter):
34,0 mm
throat:
300 mm
bore stroke:
160 mm
morse taper:
4 MK
BERNARDO PS 250 S, Metal Processing, Grinding machines, Polishing Machine

BERNARDO

PS 250 S

Kategorie 1:
Metal Processing
Kategorie 2:
Grinding machines
Kategorie 3:
Polishing Machine

Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Lagernummer:
1008-8232019
wheel diameter:
250 mm
grinding wheel size:
250 x 25 x 20 mm
turning speeds:
2850 U/min
voltage:
400 V
BERNARDO RD 820 x 32, Metal Processing, Boring mills / Machining Centers / Drilling machines, Radial Drilling Machine

BERNARDO

RD 820 x 32

Kategorie 1:
Metal Processing
Kategorie 2:
Boring mills / Machining Centers / Drilling machines
Kategorie 3:
Radial Drilling Machine

Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Lagernummer:
1008-8110015
bore capacity in steel (diameter):
32,0 mm
arm length:
310 - 820 mm
workpiece height max.:
370 - 870 mm
turning speeds:
75 - 1220 U/min